EN 15804:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products
Superseded date
11-07-2019
Superseded by
Published date
01-18-2012
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 General aspects
6 Product Category Rules for LCA
7 Content of the EPD
8 Project report
9 Verification and validity of an EPD
Annex A (normative) - Requirements and guidance on the
reference service life
Annex B (informative) - Waste
Annex C (normative) - Characterisation factors for GWP,
ODP, AP, EP, POCP and ADP
Bibliography
This European standard provides core product category rules (PCR) for Type III environmental declarations for any construction product and construction service.The core PCR:- defines the parameters to be declared and the way in which they are collated and reported,- describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages,- defines rules for the development of scenarios, - includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied,- includes the rules for reporting predetermined, environmental and health information, that is not covered by LCA for a product, construction process and construction service where necessary,- defines the conditions under which construction products can be compared based on the information provided by EPD. For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.
| Committee |
CEN/TC 350
|
| DevelopmentNote |
Supersedes PREN 15804. (02/2012) 2012 Edition Re-Issued in November 2013 & incorporates AMD 1 2013. (12/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN 15804 : 2012 + A1 2013 | Identical |
| I.S. EN 15804:2012 | Identical |
| DIN EN 15804:2014-07 | Identical |
| SN EN 15804 : 2012 + A1 2013 | Identical |
| NF EN 15804 : 2012 + A1 2014 | Identical |
| DIN EN 15804 E : 2014 | Identical |
| NBN EN 15804 : 2012 + A1 2014 | Identical |
| NS EN 15804 : 2012 + A1 2013 | Identical |
| BS EN 15804 : 2012 | Identical |
| UNI EN 15804 : 2014 | Identical |
| PN EN 15804 : 2012 + A1 2014 | Identical |
| UNE-EN 15804:2012 | Identical |
| ONORM EN 15804 : 2014 | Identical |
| NF EN 15804:2012 | Identical |
| I.S. EN 16848:2016 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| BS EN 16935:2017 | Bio-based products. Requirements for Business-to-Consumer communication and claims |
| PD CEN/TR 16970:2016 | Sustainability of construction works. Guidance for the implementation of EN 15804 |
| BS EN 16757:2017 | Sustainability of construction works. Environmental product declarations. Product Category Rules for concrete and concrete elements |
| CEN ISO/TS 14027:2018 | Environmental labels and declarations - Development of product category rules (ISO/TS 14027:2017) |
| PREN 598 : DRAFT 2017 | COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS |
| PD ISO/TS 12720:2014 | Sustainability in buildings and civil engineering works. Guidelines on the application of the general principles in ISO 15392 |
| 12/30268269 DC : 0 | BS EN 16485 - ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION |
| BS EN 16627:2015 | Sustainability of construction works. Assessment of economic performance of buildings. Calculation methods |
| 14/30294759 DC : 0 | BS 8541-6 - LIBRARY OBJECTS FOR ARCHITECTURE, ENGINEERING AND CONSTRUCTION - PART 6: PRODUCT AND FACILITY DECLARATIONS - CODE OF PRACTICE |
| BS ISO 6707-3:2017 | Buildings and civil engineering works. Vocabulary Sustainability terms |
| 14/30300963 DC : 0 | BS EN 16757 - SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR PRECAST CONCRETE PRODUCTS |
| 13/30265379 DC : 0 | BS EN 16627 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ECONOMIC PERFORMANCE OF BUILDINGS - CALCULATION METHODS |
| UNE-EN 16627:2016 | Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods |
| EN 15643-3:2012 | Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance |
| I.S. EN 16810:2017 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES |
| I.S. EN 16935:2017 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS-TO-CONSUMER COMMUNICATION AND CLAIMS |
| I.S. EN 50583-2:2016 | PHOTOVOLTAICS IN BUILDINGS - PART 2: BIPV SYSTEMS |
| UNE-EN 16783:2017 | Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations |
| S.R. CEN/TR 16470:2013 | ENVIRONMENTAL ASPECTS OF DUCTILE IRON PIPE SYSTEMS FOR WATER AND SEWERAGE APPLICATIONS |
| FD CEN/TR 15941 : 2010 FD | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - METHODOLOGY FOR SELECTION AND USE OF GENERIC DATA |
| I.S. EN 16783:2017 | THERMAL INSULATION PRODUCTS - PRODUCT CATEGORY RULES (PCR) FOR FACTORY MADE AND IN-SITU FORMED PRODUCTS FOR PREPARING ENVIRONMENTAL PRODUCT DECLARATIONS |
| CEN/TR 16928:2016 | Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering |
| EN 50583-2:2016 | Photovoltaics in buildings - Part 2: BIPV systems |
| ISO 21930:2017 | Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services |
| UNI EN 16309 : 2014-10 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| UNI EN 15643-4 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
| BS EN 16783:2017 | Thermal insulation products. Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations |
| BS EN 50583-1:2016 | Photovoltaics in buildings BIPV modules |
| BS EN 50583-2:2016 | Photovoltaics in buildings BIPV systems |
| DIN EN 15643-3:2012-04 | Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance |
| I.S. EN 16578:2016 | CERAMICS SANITARY APPLIANCES - SUSTAINABILITY ASSESSMENT |
| UNE-EN 16810:2017 | Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules |
| CEN/TR 16470:2013 | Environmental aspects of ductile iron pipe systems for water and sewerage applications |
| ISO 15686-4:2014 | Building Construction — Service Life Planning — Part 4: Service Life Planning using Building Information Modelling |
| UNE-EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| I.S. EN 14081-1:2016 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS |
| S.R. CEN ISO/TS 14027:2018 | ENVIRONMENTAL LABELS AND DECLARATIONS - DEVELOPMENT OF PRODUCT CATEGORY RULES (ISO/TS 14027:2017) |
| I.S. EN 16627:2015 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ECONOMIC PERFORMANCE OF BUILDINGS - CALCULATION METHODS |
| I.S. EN 16309:2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| ISO/TS 14027:2017 | Environmental labels and declarations — Development of product category rules |
| VDI 2067 Blatt 50:2017-08 (Draft) | Economic efficiency of construction parts |
| ISO/TS 12720:2014 | Sustainability in buildings and civil engineering works — Guidelines on the application of the general principles in ISO 15392 |
| UNE-EN 16578:2017 | Ceramics sanitary appliances - Sustainability assessment |
| DIN EN 16935:2015-12 (Draft) | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS-TO-CONSUMER COMMUNICATION AND CLAIMS |
| 14/30301580 DC : 0 | BS EN/TC 16783 - THERMAL INSULATION PRODUCTS - PRODUCT CATEGORY RULES (PCR) FOR FACTORY MADE AND IN-SITU FORMED PRODUCTS FOR PREPARING ENVIRONMENTAL PRODUCT DECLARATIONS |
| I.S. EN 15643-5:2017 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK ON SPECIFIC PRINCIPLES AND REQUIREMENT FOR CIVIL ENGINEERING WORKS |
| DIN EN 16757:2016-07 (Draft) | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR CONCRETE AND CONCRETE ELEMENTS |
| 17/30333668 DC : 0 | BS ISO 20915 - LIFE CYCLE INVENTORY CALCULATION METHODOLOGY FOR STEEL PRODUCTS |
| DIN EN 16578:2016-07 | CERAMICS SANITARY APPLIANCES - SUSTAINABILITY ASSESSMENT |
| UNE-EN 50583-2:2016 | Photovoltaics in buildings - Part 2: BIPV systems |
| DIN EN 16810 E : 2017 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES |
| PD ISO/TR 15686-11:2014 | Buildings and constructed assets. Service life planning Terminology |
| BS EN 16578:2016 | Ceramics sanitary appliances. Sustainability assessment |
| CEN/TR 16970:2016 | Sustainability of construction works - Guidance for the implementation of EN 15804 |
| DIN EN 16908 E : 2017 | CEMENT AND BUILDING LIME - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES COMPLEMENTARY TO EN 15804 |
| S.R. CEN/TR 16970:2016 | SUSTAINABILITY OF CONSTRUCTION WORKS - GUIDANCE FOR THE IMPLEMENTATION OF EN 15804 |
| BS EN 16309 : 2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| ISO 6707-3:2017 | Buildings and civil engineering works — Vocabulary — Part 3: Sustainability terms |
| I.S. EN 16757:2017 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR CONCRETE AND CONCRETE ELEMENTS |
| UNI EN 15643-3 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
| CEN/TR 17005:2016 | Sustainability of construction works - Additional environmental impact categories and indicators - Background information and possibilities - Evaluation of the possibility of adding environmental impact categories and related indicators and calculation methods for the assessment of the environmental performance of buildings |
| ISO/TR 15686-11:2014 | Buildings and constructed assets — Service life planning — Part 11: Terminology |
| EN 16810:2017 | Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules |
| DIN EN 16908:2017-05 | Cement and building lime - Environmental product declarations - Product category rules complementary to EN 15804 |
| 15/30326191 DC : 0 | BS EN 16908 - CEMENT AND BUILDING LIME - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES COMPLEMENTARY TO EN 15804 |
| 16/30339217 DC : DRAFT JUNE 2016 | BS EN 16757 - SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR CONCRETE AND CONCRETE ELEMENTS |
| BS EN 15643-3:2012 | Sustainability of construction works. Assessment of buildings Framework for the assessment of social performance |
| DIN EN 16309:2014-12 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| I.S. EN 16485:2014 | ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION |
| DIN EN 16627:2015-09 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF ECONOMIC PERFORMANCE OF BUILDINGS - CALCULATION METHODS |
| BS EN 16810:2017 | Resilient, textile and laminate floor coverings. Environmental product declarations. Product category rules |
| 14/30312994 DC : 0 | BS EN 16810 - SUSTAINABILITY OF CONSTRUCTION WORK - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS |
| 17/30351893 DC : 0 | BS EN 17074 - GLASS IN BUILDING - ENVIRONMENTAL PRODUCT DECLARATION - PRODUCT CATEGORY RULES FOR FLAT GLASS PRODUCTS |
| UNE-EN 16848:2017 | Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet |
| DIN EN 16908:2015-09 (Draft) | CEMENT AND BUILDING LIME - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES COMPLEMENTARY TO EN 15804 |
| I.S. EN 50598-3:2015 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS |
| PD ISO/TR 21932:2013 | Sustainability in buildings and civil engineering works. A review of terminology |
| PD CEN/TR 17005:2016 | Sustainability of construction works. Additional environmental impact categories and indicators. Background information and possibilities. Evaluation of the possibility of adding environmental impact categories and related indicators and calculation methods for the assessment of the environmental performance of buildings |
| PD ISO/TS 21929-2:2015 | Sustainability in building construction. Sustainability indicators Framework for the development of indicators for civil engineering works |
| 18/30367193 DC : 0 | BS EN 17213 - WINDOWS AND DOORS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WINDOWS AND PEDESTRIAN DOORSETS |
| S.R. CEN/TR 16928:2016 | GUIDANCE FOR THE IMPLEMENTATION OF ENVIRONMENTAL ASPECTS IN PRODUCT STANDARDS AND SYSTEM STANDARDS IN THE FIELD OF WASTEWATER ENGINEERING |
| S.R. CEN/TR 17005:2016 | SUSTAINABILITY OF CONSTRUCTION WORKS - ADDITIONAL ENVIRONMENTAL IMPACT CATEGORIES AND INDICATORS - BACKGROUND INFORMATION AND POSSIBILITIES - EVALUATION OF THE POSSIBILITY OF ADDING ENVIRONMENTAL IMPACT CATEGORIES AND RELATED INDICATORS AND CALCULATION METHODS FOR THE ASSESSMENT OF THE ENVIRONMENTAL PERFORMANCE OF BUILDINGS |
| BS EN 15643-5:2017 | Sustainability of construction works. Sustainability assessment of buildings and civil engineering works Framework on specific principles and requirement for civil engineering works |
| UNE-EN 15978:2012 | Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method |
| DIN EN 14081-1:2016-06 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 14081-1:2016 | Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
| UNE EN 16309 : 0 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| EN 16908:2017 | Cement and building lime - Environmental product declarations - Product category rules complementary to EN 15804 |
| EN 16783:2017 | Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations |
| EN 16935:2017 | Bio-based products - Requirements for Business-to-Consumer communication and claims |
| EN 14081-1:2016 | Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
| EN 16309:2014+A1:2014 | Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology |
| EN 16485:2014 | Round and sawn timber - Environmental Product Declarations - Product category rules for wood and wood-based products for use in construction |
| EN 16757:2017 | Sustainability of construction works - Environmental product declarations - Product Category Rules for concrete and concrete elements |
| EN 16578:2016 | Ceramics sanitary appliances - Sustainability assessment |
| EN 16627:2015 | Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods |
| I.S. EN 15643-4:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
| UNE-EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
| BS EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| DIN EN 16810:2017-08 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES |
| BS EN 16485:2014 | Round and sawn timber. Environmental Product Declarations. Product category rules for wood and wood-based products for use in construction |
| PD CEN/TR 16470:2013 | Environmental aspects of ductile iron pipe systems for water and sewerage applications |
| I.S. EN 15643-3:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
| 16/30333945 DC : 0 | BS EN 15643-5 - SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
| I.S. EN 16908:2017 | CEMENT AND BUILDING LIME - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES COMPLEMENTARY TO EN 15804 |
| PREN 17213 : DRAFT 2018 | WINDOWS AND DOORS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WINDOWS AND PEDESTRIAN DOORSETS |
| BS PD ISO/TS 14027 : 2017 | ENVIRONMENTAL LABELS AND DECLARATIONS - DEVELOPMENT OF PRODUCT CATEGORY RULES |
| BS EN 16908:2017 | Cement and building lime. Environmental product declarations. Product category rules complementary to EN 15804 |
| 16/30312210 DC : 0 | BS ISO 6707-3 - BUILDINGS AND CIVIL ENGINEERING WORKS - VOCABULARY - PART 3: SUSTAINABILITY TERMS |
| S.R. CWA 17089:2016 | INDICATORS FOR THE SUSTAINABILITY ASSESSMENT OF ROADS |
| BS ISO 15686-4:2014 | Building Construction. Service Life Planning Service Life Planning using Building Information Modelling |
| NF EN 15942 : 2011 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - COMMUNICATION FORMAT BUSINESS-TO-BUSINESS |
| UNI EN 16485 : 2014 | ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION |
| EN 15643-5:2017 | Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5: Framework on specific principles and requirement for civil engineering works |
| PREN 15643-5 : DRAFT 2016 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
| I.S. EN 50583-1:2016 | PHOTOVOLTAICS IN BUILDINGS - PART 1: BIPV MODULES |
| 17/30361321 DC : 0 | BS EN 17160 - PRODUCT CATEGORY RULES FOR CERAMIC TILES |
| UNE-CEN ISO/TS 14027:2018 | Environmental labels and declarations - Development of product category rules (ISO/TS 14027:2017) |
| PREN 17160 : DRAFT 2017 | PRODUCT CATEGORY RULES FOR CERAMIC TILES |
| 17/30362692 DC : 0 | BS EN 598 - COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS |
| DIN EN 16848:2015-04 (Draft) | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| ISO/TR 21932:2013 | Sustainability in buildings and civil engineering works A review of terminology |
| BS EN 14081-1:2016 | Timber structures. Strength graded structural timber with rectangular cross section General requirements |
| EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
| EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| ISO 15686-8:2008 | Buildings and constructed assets — Service-life planning — Part 8: Reference service life and service-life estimation |
| EN 15603:2008 | Energy performance of buildings - Overall energy use and definition of energy ratings |
| ISO 6707-1:2017 | Buildings and civil engineering works Vocabulary Part 1: General terms |
| ISO/TS 15686-9:2008 | Buildings and constructed assets — Service-life planning — Part 9: Guidance on assessment of service-life data |
| ISO 14024:1999 | Environmental labels and declarations Type I environmental labelling Principles and procedures |
| EN 15978:2011 | Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method |
| PREN 15643-3 : DRAFT 2010 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
| EN 15643-1:2010 | Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework |
| CEN/TR 15941:2010 | Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data |
| ISO 15686-2:2012 | Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures |
| ISO 15686-7:2017 | Buildings and constructed assets — Service life planning — Part 7: Performance evaluation for feedback of service life data from practice |
| ISO 21930:2017 | Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services |
| EN ISO 14040:2006 | Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006) |
| ISO 14044:2006 | Environmental management Life cycle assessment Requirements and guidelines |
| EN ISO 14025:2010 | Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
| EN 15942:2011 | Sustainability of construction works - Environmental product declarations - Communication format business-to-business |
| ISO 15686-1:2011 | Buildings and constructed assets — Service life planning — Part 1: General principles and framework |
| CEN/TR 15615:2008 | Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| EN 15643-2:2011 | Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance |
| EN 15243:2007 | Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems |
| ISO 21931-1:2010 | Sustainability in building construction Framework for methods of assessment of the environmental performance of construction works Part 1: Buildings |
| EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
| ISO 15392:2008 | Sustainability in building construction General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.