• Shopping Cart
    There are no items in your cart

EN 14984:2016

Current

Current

The latest, up-to-date edition.

Liming materials - Determination of product effect on soil pH - Soil incubation method

Published date

07-13-2016

Sorry this product is not available in your region.

European Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Method A
6 Method B
7 Test report
Annex A (informative) - Variations to the test methods
Annex B (normative) - Determination of moisture at full
        soil water holding capacity
Bibliography

This document specifies two methods (method A and method B) of measuring the effect of the addition of any material claimed to have a liming effect on the soil, using the same basic principles.Method A measures the changes to the soil pH resulting from the addition of any material claimed to have a liming effect on a standard soil, measured over a period of one month.Method B assesses the efficiency of any material claimed to have a liming effect, using a range of defined soils and measured over a period of up to 2,5 years.The methods are not applicable to mineral products coarser than 6,3 mm for method A or 20 mm for method B, determined according to EN 12948.NOTEThese methods allow comparison of products under controlled climatic conditions but do not replace field experiments.

Committee
CEN/TC 260
DevelopmentNote
Supersedes PREN 14984. (07/2016)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
PN EN 14984 : 2016 Identical
UNE 56810 :2002 Identical
DIN EN 14984:2016-10 Identical
I.S. EN 14984:2016 Identical
SN EN 14984:2016 Identical
NEN EN 14984 : 2016 Identical
NF EN 14984 : 2016 Identical
NBN EN 14984 : 2006 Identical
BS EN 14984:2016 Identical
UNI EN 14984 : 2006 Identical
NS EN 14984 : 2006 Identical
UNE-EN 14984:2017 Identical

16/30330785 DC : 0 BS EN 14069 - LIMING MATERIALS - DENOMINATIONS, SPECIFICATIONS AND LABELLING
UNI EN 16357 : 2013 CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID
I.S. EN 12945:2014 LIMING MATERIALS - DETERMINATION OF NEUTRALISING VALUE - TITRIMETRIC METHODS
BS EN 16357:2013 Carbonate liming materials. Determination of reactivity. Automatic titration method with citric acid
17/30358420 DC : 0 BS ISO 22146 - CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID
12/30263890 DC : 0 BS EN 12945 - LIMING MATERIALS - DETERMINATION OF NEUTRALIZING VALUE - TITRIMETRIC METHODS
EN 14069:2017 Liming materials - Denominations, specifications and labelling
I.S. EN 14069:2017 LIMING MATERIALS - DENOMINATIONS, SPECIFICATIONS AND LABELLING
I.S. EN 16357:2013 CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID
PREN 14069 : DRAFT 2016 LIMING MATERIALS - DENOMINATIONS, SPECIFICATIONS AND LABELLING
UNE-EN 12945:2015 Liming materials - Determination of neutralizing value - Titrimetric methods
BS EN 12945 : 2014 LIMING MATERIALS - DETERMINATION OF NEUTRALIZING VALUE - TITRIMETRIC METHODS
EN 16357:2013 Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid
PREN 12945 : DRAFT 2012 LIMING MATERIALS - DETERMINATION OF NEUTRALIZING VALUE - TITRIMETRIC METHODS
DIN EN 16357:2013-11 Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid
BS EN 14069:2017 Liming materials. Denominations, specifications and labelling

ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
EN 12945:2014+A1:2016 Liming materials - Determination of neutralizing value - Titrimetric methods
ISO 3310-1:2016 Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth
EN 12948:2010 Liming materials - Determination of size distribution by dry and wet sieving
ISO 3310-2:2013 Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
ISO 11272:2017 Soil quality — Determination of dry bulk density
EN 1482-3:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps
EN 12049:1996 Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure (ISO 8189:1992 modified)
ISO 8190:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying at (105 plus or minus 2) degrees C
ISO 11277:2009 Soil quality Determination of particle size distribution in mineral soil material Method by sieving and sedimentation
EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
EN 13971:2012 Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 11274:1998 Soil quality Determination of the water-retention characteristic Laboratory methods
EN 12048:1996 Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying at (105 +/- 2)°C (ISO 8190:1992 modified)
ISO 10390:2005 Soil quality Determination of pH
ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
ISO 14235:1998 Soil quality Determination of organic carbon by sulfochromic oxidation
EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
NFX 31 130 : 1999 SOIL QUALITY - CHEMICAL METHODS - DETERMINATION OF CATIONIC EXCHANGE CAPACITY (CEC) AND EXTRACTIBLE CATIONS
ISO 8189:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying under reduced pressure
EN 1482-1:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.