EN 14961-5:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use
05-01-2014
03-09-2011
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Specification of firewood for non-industrial use
Annex A (informative) - Comparison of moisture content as
received and dry basis
Annex B (informative) - Comparison of different cubic meters
Bibliography
This European standard determines the fuel quality classes and specifications for firewood for non-industrial use. This European standard covers only firewood produced from the following raw material (see EN 14961-1:2010, Table 1):-1.1.1 Whole trees without roots;-1.2.1 Chemically untreated wood residues;-1.1.3 Stem wood;-1.1.4 Logging residues (thick branches, tops, etc.).NOTEFor the avoidance of doubt, demolition wood is not included in the scope of this European Standard. Demolition wood is “used wood arising from demolition of buildings or civil engineering installations” (EN 14588:2010, 4.52).
| Committee |
CEN/TC 335
|
| DevelopmentNote |
Supersedes CEN/TS 14961. (03/2011) Supersedes PREN 14961-5. (08/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NS EN 14961-5 : 2011 | Identical |
| I.S. EN 14961-5:2011 | Identical |
| BS EN 14961-5:2011 | Identical |
| NF EN 14961-5 : 2011 | Identical |
| UNE-EN 14961-5:2011 | Identical |
| UNI EN 14961-5 : 2011 | Identical |
| NEN EN 14961-5 : 2011 | Identical |
| SN EN 14961-5 : 2011 | Identical |
| NBN EN 14961-5 : 2011 | Identical |
| PN EN 14961-5 : 2011 | Identical |
| DIN EN 14961-5:2011-09 | Identical |
| BS EN 15234-5:2012 | Solid biofuels. Fuel quality assurance Firewood for non-industrial use |
| UNI EN 15234-1 : 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| BS EN 303-5:2012 | Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
| EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| DIN EN 15234-1:2011-05 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| 11/30244612 DC : 0 | BS EN 15234-5 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| DIN EN 15234-5:2012-04 | Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use |
| I.S. EN 15234-5:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| DIN EN 303-5:2012-10 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| I.S. EN 303-5:2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| UNI EN 303-5 : 2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| BS EN 15234-1:2011 | Solid biofuels. Fuel quality assurance General requirements |
| UNI EN 15234-5 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| EN 15234-5:2012 | Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use |
| UNE-EN 15234-5:2012 | Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use |
| NF EN 15234-5 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| PREN 15234-5 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| UNE-EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| I.S. EN 15234-1:2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 303-5:2013 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| EN 14588:2010 | Solid biofuels - Terminology, definitions and descriptions |
| EN 14961-1:2010 | Solid biofuels - Fuel specifications and classes - Part 1: General requirements |
| EN 14774-2:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| EN 13556:2003 | Round and sawn timber - Nomenclature of timbers used in Europe |
| EN 15821:2010 | Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods |
| EN 15250:2007 | Slow heat release appliances fired by solid fuel - Requirements and test methods |
| PREN 15234-5 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| EN 14774-1:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.