EN 14783:2013
Current
The latest, up-to-date edition.
Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
05-01-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Testing, assessment and sampling methods
6 Evaluation of conformity
7 Designation
8 Product marking
Annex A (normative) - Multilayer coated steel sheet
Annex B (normative) - Test conditions for the reaction to
fire tests
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of EU Construction Products
Directive
Bibliography
This European Standard specifies the terminology, requirements and test methods for metal coil, strip, and flat sheets and factory made pieces intended for fully supported applications in roofing and wall cladding or lining. It does not apply to products manufactured on site.This European Standard covers fully-supported aluminium, copper, lead, steel, stainless steel and zinc products with or without coatings, e.g. metallic, organic, inorganic or multi-layer (see Annex A).This European Standard also includes rules for marking, labelling and evaluation of conformity.Requirements concerning acoustical and insulation properties are not considered in this European Standard.This European Standard does not include calculation or design requirements with regards to the works, installation techniques or the performance of the installed products.
| Committee |
CEN/TC 128
|
| DevelopmentNote |
Supersedes PREN 14783. (05/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 14783:2008 | Identical |
| BS EN 14783:2013 | Identical |
| UNI EN 14783 : 2013 | Identical |
| PN EN 14783 : 2013 | Identical |
| DIN EN 14783:2013-07 | Identical |
| NF EN 14783 : 2013 | Identical |
| I.S. EN 14783:2013 | Identical |
| NBN EN 14783 : 2013 | Identical |
| NEN EN 14783 : 2013 | Identical |
| NS EN 14783 : 2013 | Identical |
| SN EN 14783 : 2013 | Identical |
| UNE-EN 14783:2015 | Identical |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| PD CEN/TS 16459:2013 | External fire exposure of roofs and roof coverings. Extended application of test results from CEN/TS 1187 |
| I.S. EN 50583-2:2016 | PHOTOVOLTAICS IN BUILDINGS - PART 2: BIPV SYSTEMS |
| 14/30297831 DC : 0 | BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| UNI EN 1090-1 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| S.R. CEN/TS 16459:2013 | EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187 |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| EN 1090-1:2009+A1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| EN 50583-2:2016 | Photovoltaics in buildings - Part 2: BIPV systems |
| BS EN 1090-1 : 2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| BS EN 50583-1:2016 | Photovoltaics in buildings BIPV modules |
| BS EN 50583-2:2016 | Photovoltaics in buildings BIPV systems |
| UNE-EN 1090-1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| UNE-EN 50583-2:2016 | Photovoltaics in buildings - Part 2: BIPV systems |
| 12/30266506 DC : 0 | BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS |
| PREN 1090-4 : DRAFT 2014 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| UNI CEN/TS 16459 : 2014 | EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187 |
| PREN 50583 : DRAFT 2012 | PHOTOVOLTAICS IN BUILDINGS |
| CEN/TS 16459:2013 | External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 |
| UNE-EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
| I.S. EN 1090-1:2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| I.S. EN 50583-1:2016 | PHOTOVOLTAICS IN BUILDINGS - PART 1: BIPV MODULES |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
| DIN EN 1090-1:2012-02 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components (includes Amendment A1:2011) |
| ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| EN 501:1994 | Roofing products from metal sheet - Specification for fully supported roofing products of zinc sheet |
| EN 504:1999 | Roofing products from metal sheet - Specification for fully supported roofing products of copper sheet |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN ISO 6988:1994 | Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985) |
| EN 13162:2012+A1:2015 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| EN 507:1999 | Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 502:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 12588:2006 | Lead and lead alloys - Rolled lead sheet for building purposes |
| ISO 9001:2015 | Quality management systems — Requirements |
| CEN/TS 1187:2012 | Test methods for external fire exposure to roofs |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 505:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
| ISO 6988:1985 | Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.