EN 14755:2005
Current
The latest, up-to-date edition.
Extruded particleboards - Specifications
10-19-2005
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Requirements
5.1 General
5.2 General requirements
5.3 Mechanical properties
6 Supplementary properties
7 Factory production control
8 Marking
Annex A (normative) Test methods of bending
strength, internal bond and
dimensional variations
Annex B (informative) Supplementary properties
Bibliography
This European Standard specifies the requirements for non load-bearing extruded particleboards for use in dry conditions.NOTEDry conditions are defined in terms of service class 1 of EN 1995-1-1 which is characterized by a moisture content in the material corresponding to a temperature of 20°C and a relative humidity of the surrounding air only exceeding 65% for a few weeks per year. Boards of this type are only suitable in biological hazard class 1 of EN 335-3.
| Committee |
CEN/TC 112
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 14755:2006-01 | Identical |
| NBN EN 14755 : 2006 | Identical |
| NF EN 14755 : 2006 | Identical |
| UNE-EN 14755:2006 | Identical |
| UNI EN 14755 : 2006 | Identical |
| PN EN 14755 : 2007 | Identical |
| SN EN 14755 : 2005 | Identical |
| BS EN 14755:2005 | Identical |
| NS EN 14755 : 1ED 2006 | Identical |
| I.S. EN 14755:2005 | Identical |
| NEN EN 14755 : 2005 | Identical |
| UNE-EN 14755:2005 | Identical |
| BS EN 326-2 : 2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| BS EN 312:2010 | Particleboards. Specifications |
| CEN/TS 16368:2014 | Lightweight Particleboards - Specifications |
| 12/30254092 DC : 0 | BS EN 16368 - LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| DIN EN 13986:2015-06 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| DIN EN 326-2:2014-10 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014 |
| DIN EN 14322:2004-06 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| I.S. EN 312:2010 | PARTICLEBOARDS - SPECIFICATIONS |
| I.S. EN 13986:2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 14322:2017 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| I.S. EN 326-2:2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| PD CEN/TS 16368:2014 | Lightweight Particleboards. Specifications |
| PREN 14322 : DRAFT 2014 | WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| S.R. CEN/TS 16368:2014 | LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| UNI CEN/TS 16368 : 2014 | LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 13986:2004+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| UNI EN 312 : 2010 | PARTICLEBOARDS - SPECIFICATIONS |
| UNI EN 326-2 : 2014 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| 14/30303732 DC : 0 | BS EN 14322 - WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| BS EN 14322:2017 | Wood-based panels. Melamine faced board for interior uses. Definition, requirements and classification |
| UNE-EN 312:2010 | Particleboards - Specifications |
| UNE-EN 13986:2006 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 312:2010 | Particleboards - Specifications |
| BS EN 13986 : 2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| UNE-EN 14322:2017 | Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification |
| DIN EN 326-2:2000-10 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| DIN EN 312:2010-12 | Particleboards - Specifications |
| EN 14322:2017 | Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification |
| UNE-EN 13986:2006+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 120:1992 | Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.