EN 14221:2006
Current
The latest, up-to-date edition.
Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications
11-08-2006
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Appearance
5.1 Characteristics
5.2 Appearance classes
5.2.1 General
5.2.2 Finger jointing, end jointing, edge jointing and
laminating
5.3 Adhesives and repair compounds
5.4 Slope of grain
5.5 Repairs
5.5.1 Features
5.5.2 Plugs
5.5.3 Filler
5.6 Wood-based products
6 Biological durability
7 Moisture content
8 Surface finish
9 Density
Annex A (normative) Quality recommendations for elements in
internal windows, door leaves and internal doorframes
Bibliography
This European Standard specifes principle material requirements for timber and wood-based products in internal windows, doors and doorframes (with or without fixed parts), including appearance, biological durability and other physical characteristics. This European Standard applies to factory assembled internal windows, door leaves and doorframes uncoated or intended to be coated.If doors are covered by other decorative veneers or films the respective veneer or film Product Standard shall apply.EXAMPLETimber veneers may be graded to EN 635: Parts 1, 2, 3 and 5, and ENV 635 4.
| Committee |
CEN/TC 175
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 14221:2007-01 | Identical |
| UNE-EN 14221:2007 | Identical |
| I.S. EN 14221:2006 | Identical |
| UNI EN 14221 : 2007 | Identical |
| SN EN 14221 : 2006 | Identical |
| BS EN 14221:2006 | Identical |
| NS EN 14221 : 1ED 2007 | Identical |
| NF EN 14221 : 2007 | Identical |
| NBN EN 14221 : 2007 | Identical |
| NEN EN 14221 : 2006 | Identical |
| PN EN 14221 : OCT 2007 | Identical |
| UNE-CEN/TS 13307-2:2010 EX | Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control |
| XP CEN/TS 13307-2 : 2010 XP | LAMINATED AND FINGER JOINTED TIMBER BLANKS AND SEMI-FINISHED PROFILES FOR NON-STRUCTURAL USES - PART 2: PRODUCTION CONTROL |
| BS EN 13307-1:2006 | Timber blanks and semi-finished profiles for non-structural uses Requirements |
| EN 13307-1:2006 | Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements |
| DD CEN/TS 13307-2:2009 | Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses Production control |
| UNI CEN/TS 13307-2 : 2010 | LAMINATED AND FINGER JOINTED TIMBER BLANKS AND SEMI-FINISHED PROFILES FOR NON-STRUCTURAL USES - PART 2: PRODUCTION CONTROL |
| I.S. EN 942:2007 | TIMBER IN JOINERY - GENERAL REQUIREMENTS |
| S.R. CEN TS 13307-2:2009 | LAMINATED AND FINGER JOINTED TIMBER BLANKS AND SEMI-FINISHED PROFILES FOR NON-STRUCTURAL USES - PART 2: PRODUCTION CONTROL |
| DIN EN 942:2007-06 | Timber in joinery - General requirements |
| BS EN 14220:2006 | Timber and wood-based materials in external windows, external door leaves and external doorframes. Requirements and specifications |
| BS EN 942:2007 | Timber in joinery. General requirements |
| EN 942:2007 | Timber in joinery - General requirements |
| EN 14220:2006 | Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
| DIN EN 13307-1:2007-01 | Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements |
| CEN/TS 13307-2:2009 | Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control |
| DIN EN 14220:2007-01 | Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
| EN 13183-3:2005 | Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method |
| EN 635-2:1995 | Plywood - Classification by surface appearance - Part 2: Hardwood |
| EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
| EN 14220:2006 | Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
| EN 12765:2016 | Classification of thermosetting wood adhesives for non-structural applications |
| ENV 635-4 : 1996 | PLYWOOD - CLASSIFICATION BY SURFACE APPEARANCE - PARAMETERS OF ABILITY FOR FINISHING, GUIDELINE |
| EN 13307-1:2006 | Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements |
| EN 351-1:2007 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
| EN 14298:2017 | Sawn timber - Assessment of drying quality |
| EN 204:2016 | Classification of thermoplastic wood adhesives for non-structural applications |
| EN 14951:2006 | Solid hardwood panelling and cladding - Machined profiles elements |
| EN 14519:2005 | Solid softwood panelling and cladding - Machined profiles with tongue and groove |
| EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| EN 635-1:1994 | Plywood - Classification by surface appearance - Part 1: General |
| EN 844-3:1995 | Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber |
| EN 635-3:1995 | Plywood - Classification by surface appearance - Part 3: Softwood |
| EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
| EN 635-5:1999 | Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.