EN 14035-7:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fireworks - Part 7: Bengal matches - Specification and test methods
09-01-2010
08-18-2004
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
4.1 Means of ignition
4.2 Attachment of friction head
4.3 Resistance to ignition by an abrasive surface
4.4 Protection of Bengal match
4.5 Material of stick
4.6 Integrity of stick
4.7 Net explosive content
4.8 Length of uncoated end of wooden stick (handle)
4.9 Striking surface
5 Performance
5.1 Friction head
5.2 Principal effects
5.3 Burning matter
5.4 Burning of pyrotechnic composition
5.5 Burning rate of pyrotechnic composition
6 Primary pack
7 Minimum labelling requirements
7.1 General
7.2 Type name and category
7.3 Safety information
7.3.1 General
7.3.2 Bengal matches
7.4 Name, address and telephone number of manufacturer
or distributor or importer
7.5 Reference to this standard
7.6 Printing
7.6.1 Labelling
7.6.2 Type size
7.7 Additional information on the primary pack
8 Test methods
8.1 Attachment of friction head (type test)
8.1.1 Apparatus
8.1.2 Procedure
8.2 Resistance to ignition by an abrasive surface (type
test and batch test)
8.2.1 Apparatus
8.2.2 Procedure
8.3 Length of uncoated end of wooden stick (type test
and batch test)
8.3.1 Apparatus
8.3.2 Procedure
8.4 Performance (type test and batch test)
8.4.1 Test environment
8.4.2 Material
8.4.3 Apparatus
8.4.4 Procedure
8.5 Determination of net explosive content (type test)
8.5.1 Material
8.5.2 Apparatus
8.5.3 Procedure
8.6 Labelling (type test and batch test)
Annex A (normative) Type testing
A.1 General
A.2 Number of Bengal matches to be tested
A.3 Loose pyrotechnic composition
A.4 Thermal conditioning
A.5 Mechanical conditioning
A.5.1 Apparatus
A.5.2 Procedure
A.6 Number of primary packs to be examined
A.7 Test report
Annex B (normative) Batch testing
B.1 General
B.2 Sampling plans
B.3 Unit of product
B.4 Nonconformities
B.5 Test report
B.6 Acceptance or rejection of a batch
B.6.1 General
B.6.2 Nonconforming units
B.6.3 Critical nonconforming units
B.6.4 Major nonconforming units
B.6.5 Minor nonconforming units
Annex C (normative) Specification for test paper
C.1 Requirements
C.2 Scorch test
C.2.1 Material
C.2.2 Apparatus
C.2.3 Test specimen
C.2.4 Procedure
Annex D (normative) Method for determination of smouldering
rate of cigarette
Annex E (informative) A-Deviations
This document specifies requirements for the construction, performance, primary packaging and labelling of Bengal matches and the corresponding test methods. It is applicable to fireworks which are classified as Bengal match in category 1 in EN 14035-2 and which are contained in a primary pack.It is not applicable to Bengal matches containing pyrotechnic composition that includes any of the following substances:-arsenic or arsenic compounds;-mixtures containing a mass fraction of chlorates greater than 80 %;-mixtures of chlorates with metals;-mixtures of chlorates with red phosphorus;-mixtures of chlorates with potassium hexacyanoferrate(II);-mixtures of chlorates with sulfur;-mixtures of chlorates with sulfides;-lead or lead compounds;-mercury compounds;-white phosphorus;-picrates or picric acid;-potassium chlorate with a mass fraction of bromates greater than 0,15 %;-sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %;-zirconium with a particle size of less than 40 mm.NOTEIn EN 14035-2, Bengal matches are classified as follows:- brief description: short wooden stick partially coated (along one end) with slow-burning pyrotechnic composition, with a dot of friction-sensitive pyrotechnic composition at the tip, and designed to be hold in the hand;- principal effects: emission of coloured flame and/or sparks.Schemes for type testing of Bengal matches and batch testing of Bengal matches are specified in annex A and annex B respectively.Requirements for construction, performance, labelling, sampling and testing of Bengal matches
Committee |
CEN/TC 212
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
UNI EN 14035-7 : 2004 | Identical |
SN EN 14035-7 : 2004 | Identical |
PN EN 14035-7 : 2005 | Identical |
I.S. EN 14035-7:2004 | Identical |
UNE-EN 14035-7:2005 | Identical |
NF EN 14035-7 : 2005 | Identical |
BS EN 14035-7:2004 | Identical |
NEN EN 14035-7 : 2004 | Identical |
NBN EN 14035-7 : 2004 | Identical |
NS EN 14035-7 : 1ED 2004 | Identical |
DIN EN 14035-7:2004-11 | Identical |
ISO 845:2006 | Cellular plastics and rubbers — Determination of apparent density |
ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
EN ISO 845:2009 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
EN ISO 536:2012 | Paper and board - Determination of grammage (ISO 536:2012) |
ISO 3599:1976 | Vernier callipers reading to 0,1 and 0,05 mm |
EN 20187:1993 | Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990) |
ISO 536:2012 | Paper and board Determination of grammage |
ISO 2439:2008 | Flexible cellular polymeric materials Determination of hardness (indentation technique) |
ISO 6344-3:2013 | Coated abrasives Grain size analysis Part 3: Determination of grain size distribution of microgrits P240 to P2500 |
ISO 21948:2001 | Coated abrasives Plain sheets |
EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
EN ISO 2439:2008 | Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.