EN 13674-4:2006+A1:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m
04-11-2019
11-11-2009
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Steel grades
6 Dimensions, static properties, linear mass
and tolerances
7 Manufacture
8 Qualification of the manufacturer
9 Acceptance tests
Annex A (normative) - Rail profiles
Annex B (informative) - Comparison of steel designations
referred to in this European Standard
compared to those in EN 10027-1 and
EN 10027-2
Bibliography
This document specifies flat bottom Vignole railway rails from 27 kg/m to, but excluding 46 kg/m.Eight pearlitic steel grades are specified covering a rail hardness range of 200 HBW to 440 HBW and include non-heat-treated non-alloy steels, non-heat-treated alloy steels, heat-treated non-alloy steels and heat-treated alloy steels.There are 15 rail profiles specified in this document, but these may not be available in all steel grades.
Committee |
CEN/TC 256
|
DevelopmentNote |
2006 Edition Re-Issued in November 2009 and incorporates AMD 1 2009. (12/2009)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NS EN 13674-4 : 2006 + A1 2009 | Identical |
ONORM EN 13674-4 : 2011 | Identical |
NEN EN 13674-4 : 2006 + A1 2009 | Identical |
BS EN 13674-4 : 2006 | Identical |
NF EN 13674-4 : 2006 + A1 2010 | Identical |
UNI EN 13674-4 : 2010 | Identical |
UNE-EN 13674-4:2007 | Identical |
DIN EN 13674-4:2016-05 (Draft) | Identical |
NBN EN 13674-4 : 2006 + A1 2010 | Identical |
UNI EN 13674-4:2019 | Identical |
I.S. EN 13674-4:2006 | Identical |
SN EN 13674-4 : 2006 + A1 2010 | Identical |
PN EN 13674-4 : 2006 + A1 2010 | Identical |
NEN-EN 13674-4:2019 | Identical |
UNE-EN 13674-4:2007+A1:2010 | Identical |
UNI EN 14587-3 : 2012 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
10/30205098 DC : DRAFT JUNE 2010 | BS EN 13481-2 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
17/30326176 DC : 0 | BS EN 16729-3 - RAILWAY APPLICATIONS - INFRASTRUCTURE - NON-DESTRUCTIVE TESTING ON RAILS IN TRACK - PART 3: REQUIREMENTS FOR IDENTIFYING INTERNAL AND SURFACE RAIL DEFECTS |
UNE-EN 14587-3:2013 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
DIN EN 13481-7:2012-08 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
DIN EN 13481-1:2012-08 | Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions |
DIN EN 13481-2:2012-08 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
BS EN 13481-3:2012 | Railway applications. Track. Performance requirements for fastening systems Fastening systems for wood sleepers |
EN 13481-7:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
EN 13232-7:2006+A1:2011 | Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts |
EN 13481-5:2012+A1:2017 | Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel |
10/30205101 DC : DRAFT JUNE 2010 | BS EN 13481-3 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 3: FASTENING SYSTEMS FOR WOOD SLEEPERS |
10/30205107 DC : DRAFT JUNE 2010 | BS EN 13481-5 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
14/30285784 DC : 0 | BS EN 16730 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
10/30205104 DC : DRAFT JUNE 2010 | BS EN 13481-4 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 4: FASTENING SYSTEMS FOR STEEL SLEEPERS |
I.S. EN 16729-3:2018 | RAILWAY APPLICATIONS - INFRASTRUCTURE - NON-DESTRUCTIVE TESTING ON RAILS IN TRACK - PART 3: REQUIREMENTS FOR IDENTIFYING INTERNAL AND SURFACE RAIL DEFECTS |
DIN EN 13232-9:2012-01 | Railway applications - Track - Switches and crossings - Part 9: Layouts (includes Amendment A1:2011) |
UNE-EN 13481-7:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
UNE-EN 13481-1:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions |
I.S. EN 13481-5:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
I.S. EN 13481-3:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 3: FASTENING SYSTEMS FOR WOOD SLEEPERS |
I.S. EN 13232-7:2006 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 7: CROSSINGS WITH MOVEABLE PARTS |
I.S. EN 13481-4:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 4: FASTENING SYSTEMS FOR STEEL SLEEPERS |
DIN EN 13232-7:2012-01 | Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts (includes Amendment A1:2011) |
DIN EN 13481-8:2006-06 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 8: FASTENING SYSTEMS FOR TRACK WITH HEAVY AXLE LOADS |
I.S. EN 13481-8:2006 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 8: FASTENING SYSTEMS FOR TRACK WITH HEAVY AXLE LOADS |
I.S. EN 13481-7:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 7: SPECIAL FASTENING SYSTEMS FOR SWITCHES AND CROSSING AND CHECK RAILS |
I.S. EN 13232-9:2006 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 9: LAYOUTS |
I.S. EN 13481-1:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 1: DEFINITIONS |
I.S. EN 13481-2:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
VDI 3576:2011-03 | Rails for crane systems - Rail connections, rail beddings, rail fastenings, tolerances for crane tracks |
10/30205095 DC : DRAFT JUNE 2010 | BS EN 13481-1 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 1: DEFINITIONS |
DIN EN 14587-3:2013-01 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
UNE-EN 13232-9:2007 | Railway applications - Track - Switches and crossings - Part 9: Layouts |
UNI EN 13481-4 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 4: FASTENING SYSTEMS FOR STEEL SLEEPERS |
UNI EN 13481-3 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 3: FASTENING SYSTEMS FOR WOOD SLEEPERS |
UNI EN 13481-7 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 7: SPECIAL FASTENING SYSTEMS FOR SWITCHES AND CROSSINGS AND CHECK RAILS |
UNI EN 13232-7 : 2012 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 7: CROSSINGS WITH MOVEABLE PARTS |
UNI EN 13232-9 : 2012 | Railway applications - Track - Switches and crossings - Part 9: Layouts |
UNI EN 13481-1 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 1: DEFINITIONS |
BS EN 14587-3:2012 | Railway applications. Track. Flash butt welding of rails Welding in association with crossing construction |
DIN EN 13481-5:2012-08 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
UNE-EN 13481-3:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers |
BS EN 13481-5 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
BS EN 13481-7:2012 | Railway applications. Track. Performance requirements for fastening systems Special fastening systems for switches and crossings and check rails |
BS EN 13481-1:2012 | Railway applications. Track. Performance requirements for fastening systems Definitions |
BS EN 13481-8:2006 | Railway applications. Track. Performance requirements for fastening systems Fastening systems for track with heavy axle loads |
UNE-EN 13481-4:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
DIN EN 13232-9:2014-07 (Draft) | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 9: LAYOUTS |
DIN EN 13232-7:2014-07 (Draft) | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 7: CROSSINGS WITH MOVEABLE PARTS |
BS EN 13232-7 : 2006 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 7: CROSSINGS WITH MOVEABLE PARTS |
UNE-EN 13481-2:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
BS EN 13481-2 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
EN 16729-3:2018 | Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 3: Requirements for identifying internal and surface rail defects |
EN 14587-3:2012 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
I.S. EN 14587-3:2012 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
DIN EN 13481-3:2012-11 | Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers |
DIN EN 13481-4:2012-11 | Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
BS EN 13481-4:2012 | Railway applications. Track. Performance requirements for fastening systems Fastening systems for steel sleepers |
BS EN 13232-9 : 2006 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 9: LAYOUTS |
EN 13232-9:2006+A1:2011 | Railway applications - Track - Switches and crossings - Part 9: Layouts |
EN 13481-2:2012+A1:2017 | Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
EN 13481-4:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
EN 13481-1:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions |
EN 13481-3:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers |
EN 13481-8:2006 | Railway applications - Track - Performance requirements for fastening systems - Part 8: Fastening systems for track with heavy axle loads |
UNE-EN 13232-7:2007 | Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts |
UNE-EN 13481-5:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel |
EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 9001:2015 | Quality management systems — Requirements |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
EN 13674-1:2011+A1:2017 | Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.