EN 13621:2004+A1:2010
Current
The latest, up-to-date edition.
Food processing machinery - Salad dryers - Safety and hygiene requirements
04-21-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions - Description
4 List of significant hazards
5 Safety and hygiene requirements and/or measures
6 Verification of the safety and hygiene requirements and/or
measures
7 Information for use
Annex A (normative) Noise test code for salad dryers (Grade 2)
Annex B (normative) Additional principles of design to ensure
the cleanability of salad dryers
Annex ZA (informative) Relationship between this European Standard
and the Essential Requirements of EU Directive 98/37/EC
Annex ZB (informative) Relationship between this European Standard
and the Essential Requirements of EU Directive 2006/42/EC
Bibliography
This document specifies the safety and hygiene requirements for the design and manufacture of salad dryers taking account of installation, cleaning, removal of jammed food, feeding, maintenance and decommissioning. The spinning function is obtained by the rotation of a perforated basket in which the product being processed is placed.It applies to machines:-which are intended for use in the commercial and institutional catering industry;-having a rotation speed between 300 rpm and 900 rpm;-having a nominal output below 2 kW;-having a nominal volume of the basket less than 100 l.These machines can be stationary or movable.The machines concerned by this document are those appliances which are intended for eliminating by spinning the water present on salad after washing. These machines can also be used for spinning other vegetables such as spinach, watercress, radish, French beans, etc.The machines covered by this document are not intended to be cleaned with water jet.This European Standard deals with all significant hazards, hazardous situations and events relevant to salad dryers, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).NOTEIf the machine is not used under above conditions, the manufacturer should verify, when he is informed of such situation, if the preventive measures remain valid (see 3.22 of EN ISO 12100-1:2003).The feeding principle of the machine can be notably:-manual loading into the basket left in position in the machine;-placing in and withdrawal from the machine of the loaded basket.1.2Noise is not considered to be a significant hazard with salad dryers. This does not mean that the manufacturer of these machines is absolved from reducing noise and making a noise declaration. Therefore a noise test code is proposed in Annex A.1.3Vibrations are not considered as a hazard with these machines.
Committee |
CEN/TC 153
|
DevelopmentNote |
2004 Edition Re-issued in April 2010 & incorporates AMD 1 2010. Supersedes UNE EN 13621. (05/2010)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NS EN 13621 : 2004 + A1 2010 | Identical |
NEN EN 13621 : 2004 + A1 2010 | Identical |
UNI EN 13621 : 2010 | Identical |
SN EN 13621+A1:2010 | Identical |
I.S. EN 13621:2004 | Identical |
NBN EN 13621 : 2004 + A1 2010 | Identical |
UNE-EN 13621:2004+A1:2010 | Identical |
PN EN 13621 : 2006 + A1 2010 | Identical |
NF EN 13621 : 2004 + A1 2010 | Identical |
DIN EN 13621:2011-02 | Identical |
UNE-EN 13621:2005 | Identical |
BS EN 13621 : 2004 | Identical |
PNE-EN 13621:2004/FprA1 | Identical |
BS EN 13621:2004+A1:2010 | Identical |
BS EN 1672-1:2014 | Food processing machinery. Basic concepts Safety requirements |
I.S. EN 1672-1:2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
DIN EN 1672-1:2014-12 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
UNE-EN 1672-1:2015 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
EN 1672-1:2014 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
UNI EN 1672-1 : 2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
CEN/TR 15623:2008 | Food processing machinery - Route map - Materials for food area |
ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
EN 1672-2:2005+A1:2009 | Food processing machinery - Basic concepts - Part 2: Hygiene requirements |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.