EN 13566-3:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
05-01-2011
12-18-2002
Foreword
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
3.1 Terms and definitions
3.2 Symbols and abbreviations
4 Pipes at the "M" stage
4.1 Materials
4.2 General characteristics
4.3 Material characteristics
4.4 Geometric characteristics
4.5 Mechanical characteristics
4.6 Physical characteristics
4.7 Jointing
4.8 Marking
5 Fittings
6 Ancillary components
7 Fitness for purpose of the lining system at the "I"
stage
7.1 Materials
7.2 General characteristics
7.3 Material characteristics
7.4 Geometric characteristics
7.5 Mechanical characteristics
7.6 Physical characteristics
7.7 Additional characteristics
7.8 Sampling
8 Installation practice
8.1 Preparatory work
8.2 Storage, handling and transport of pipes and fittings
8.3 Equipment
8.4 Installation
8.5 Process-related inspection and testing
8.6 Lining termination
8.7 Reconnecting to existing manholes and laterals
8.8 Final inspection and testing
Annex A (informative) Recommended scheme for assessment of
conformity
A.1 Scope
A.2 General
A.3 Testing and Inspection
Annex B (normative) Folded polyethylene (PE) pipe -
Determination of resistance to circumferential tensile
stress at constant temperature
B.1 Scope
B.2 Principle
B.3 Apparatus
B.4 Preparation of test pieces
B.5 Conditioning of test pieces
B.6 Procedure
B.7 Test report
Bibliography
This Part 3 of prEN (155wi209), read in conjunction with Part 1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as close-fit pipes in the renovation of non-pressure drainage and sewerage networks. It covers components made of polyethylene (PE) or unplasticized polyvinyl chloride (PVC-U). It is applicable to the plastic lining system only. It does not cover the requirements for the existing pipeline.
| Committee |
CEN/TC 155
|
| DevelopmentNote |
To be read in conjunction with EN 13566-1 (02/2003)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNI EN 13566-3 : 2004 | Identical |
| PN EN 13566-3 : 2004 | Identical |
| DIN EN 13566-3:2003-04 | Identical |
| NBN EN 13566-3 : 2003 | Identical |
| NEN EN 13566-3 : 2003 | Identical |
| NS EN 13566-3 : 1ED 2003 | Identical |
| SN EN 13566-3 : 2003 | Identical |
| I.S. EN 13566-3:2003 | Identical |
| BS EN 13566-3:2002 | Identical |
| NF EN 13566-3 : 2003 | Identical |
| UNE-EN 13566-3:2003 | Identical |
| CEN/TR 14920:2005 | Jetting resistance of drain and sewer pipes - Moving jet test method |
| DIN EN 15885:2011-03 | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS |
| I.S. EN 13566-1:2003 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 1: GENERAL |
| PD CEN/TR 14920:2005 | Jetting resistance of drain and sewer pipes. Moving jet test method |
| DIN EN 15885:2016-01 (Draft) | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS |
| 08/30190305 DC : DRAFT DEC 2008 | BS EN 15885 - CLASSIFICATION AND PERFORMANCE CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS |
| BS EN 15885:2010 | Classification and characteristics of techniques for renovation and repair of drains and sewers |
| EN 15885:2010 | Classification and characteristics of techniques for renovation and repair of drains and sewers |
| I.S. CEN TR 14920:2005 | JETTING RESISTANCE OF DRAIN AND SEWER PIPES - MOVING JET TEST METHOD |
| UNE-EN 15885:2011 | Classification and performance characteristics of techniques for renovation and repair of drains and sewers |
| I.S. EN 15885:2010 | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS |
| UNI EN 15885 : 2011 | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS |
| BS EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks General |
| EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
| ISO 13953:2001 | Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| EN ISO 9967:2016 | Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016) |
| ENV 1401-2:2000 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
| EN ISO 6259-1:2015 | Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO/TR 11295:1992 | Techniques for rehabilitation of pipeline sytems by the use of plastics pipes and fittings |
| ISO 6259-1:2015 | Thermoplastics pipes Determination of tensile properties Part 1: General test method |
| EN 13689 : 2002 | GUIDANCE ON THE CLASSIFICATION AND DESIGN OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION |
| EN 727:1994 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| EN ISO 9969:2016 | Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016) |
| EN 1401-1:2009 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| PREN ISO 3126 : DRAFT 1999 | PLASTICS PIPING SYSTEMS - PLASTICS PIPING COMPONENTS - MEASUREMENT AND DETERMINATION OF DIMENSIONS |
| ISO 9967:2016 | Thermoplastics pipes Determination of creep ratio |
| ISO 899-1:2017 | Plastics — Determination of creep behaviour — Part 1: Tensile creep |
| ISO 9969:2016 | Thermoplastics pipes Determination of ring stiffness |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.