EN 13481-2:2012+A1:2017
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
07-31-2017
01-25-2017
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Requirements
6 Test specimens
7 Fitness for purpose
8 Marking, labelling and packaging
Annex A (informative) - Vibration and noise
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2008/57/EC
Bibliography
This European Standard is applicable to fastening systems in Categories A - E as specified in EN 13481 1:2012, 3.1, for use on concrete sleepers in ballasted track with maximum axle loads, and minimum curve radii as shown in Table 1.Table 1 - Fastening category criteriaCategoryMaximum design axle loadkNMinimum curve radiusmA13040B18080C260150D260400E350150NOTEThe maximum axle load for Categories A and B does not apply to maintenance vehicles.The requirements apply to:-fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems;-fastening systems with dynamic stiffness, kLFA, not less than 50 MN/m;-fastening systems for rail sections included in EN 13674-1 (excluding 49E4) or EN 13674-4.This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints.This standard should only be used for type approval of complete fastening systems.
Committee |
CEN/TC 256
|
DevelopmentNote |
2012 Edition Re-Issued in January 2017 & incorporates AMD 1 2017. (01/2017)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Withdrawn
|
Standards | Relationship |
UNE-EN 13481-2:2012 | Identical |
ONORM EN 13481-2 : 2017 | Identical |
UNI EN 13481-2:2017 | Identical |
I.S. EN 13481-2:2012 | Identical |
DIN EN 13481-2:2017-05 | Identical |
NF EN 13481-2 : 2012 + A1 2017 | Identical |
NEN EN 13481-2 : 2012 + A1 2017 | Identical |
NBN EN 13481-2 : 2012 COR 2014 | Identical |
UNI EN 13481-2 : 2012 | Identical |
DIN EN 13481-2:2012-08 | Identical |
SN EN 13481-2+A1:2017 | Identical |
BS EN 13481-2 : 2012 | Identical |
PN EN 13481-2 : 2012 + A1 2017 | Identical |
NS EN 13481-2 : 2012 + A1 2017 | Identical |
UNE-EN 13481-2:2012+A1:2017 | Identical |
BS EN 13481-2:2012+A1:2017 | Identical |
DIN EN 13146-10:2015-05 (Draft) | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 10: PROOF LOAD TEST FOR PULL-OUT RESISTANCE |
DIN EN 13481-7:2012-08 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
DIN EN 13146-4:2015-01 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 4: EFFECT OF REPEATED LOADING |
EN 13146-4:2012+A1:2014 | Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading |
BS EN 13146-8:2012 | Railway applications. Track. Test methods for fastening systems In service testing |
BS EN 13230-1:2016 | Railway applications. Track. Concrete sleepers and bearers General requirements |
EN 13481-7:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
EN 13146-8:2012 | Railway applications - Track - Test methods for fastening systems - Part 8: In service testing |
EN 13146-10:2017 | Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance |
EN 13230-1:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
UNE-EN 13146-10:2017 | Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance |
UNE-EN 13481-7:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
DIN EN 13481-8:2006-06 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 8: FASTENING SYSTEMS FOR TRACK WITH HEAVY AXLE LOADS |
I.S. EN 13481-8:2006 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 8: FASTENING SYSTEMS FOR TRACK WITH HEAVY AXLE LOADS |
I.S. EN 13481-7:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 7: SPECIAL FASTENING SYSTEMS FOR SWITCHES AND CROSSING AND CHECK RAILS |
I.S. EN 13146-8:2012 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 8: IN SERVICE TESTING |
I.S. EN 13230-1:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS |
I.S. EN 13146-10:2017 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 10: PROOF LOAD TEST FOR PULL-OUT RESISTANCE |
14/30292279 DC : 0 | BS EN 13230-1 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS |
UNI EN 13146-8 : 2012 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 8: IN SERVICE TESTING |
UNI EN 13481-7 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 7: SPECIAL FASTENING SYSTEMS FOR SWITCHES AND CROSSINGS AND CHECK RAILS |
BS EN 13146-10:2017 | Railway applications. Track. Test methods for fastening systems Proof load test for pull-out resistance |
PREN 13230-1 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS |
03/314354 DC : DRAFT SEP 2003 | BS EN 13232-7 - RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 7: CROSSINGS WITH MOVEABLE PARTS |
14/30209503 DC : 0 | BS EN 13230-6 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 6: DESIGN |
DIN EN 13146-8:2012-06 | Railway applications - Track - Test methods for fastening systems - Part 8: In service testing |
UNE-EN 13230-1:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
BS EN 13481-7:2012 | Railway applications. Track. Performance requirements for fastening systems Special fastening systems for switches and crossings and check rails |
BS EN 13481-8:2006 | Railway applications. Track. Performance requirements for fastening systems Fastening systems for track with heavy axle loads |
UNI EN 13146-4 : 2014 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 4: EFFECT OF REPEATED LOADING |
I.S. EN 13146-4:2012 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 4: EFFECT OF REPEATED LOADING |
UNE-EN 13146-8:2012 | Railway applications - Track - Test methods for fastening systems - Part 8: In service testing |
BS EN 13146-4 : 2012 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 4: EFFECT OF REPEATED LOADING |
DIN EN 13146-10:2017-05 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 10: PROOF LOAD TEST FOR PULL-OUT RESISTANCE |
EN 13481-8:2006 | Railway applications - Track - Performance requirements for fastening systems - Part 8: Fastening systems for track with heavy axle loads |
UNE-EN 13146-4:2012 | Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading |
EN 13146-6:2012 | Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions |
EN 13146-3:2012 | Railway applications - Track - Test methods for fastening systems - Part 3: Determination of attenuation of impact loads |
EN 13674-4:2006+A1:2009 | Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
EN 15461:2008+A1:2010 | Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements |
EN 50122-2:2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 2: PROVISIONS AGAINST THE EFFECTS OF STRAY CURRENTS CAUSED BY D.C. TRACTION SYSTEMS |
EN 13146-7:2012 | Railway applications - Track - Test methods for fastening systems - Part 7: Determination of clamping force |
2008/57/EC : 2008 AMD 5 2014 | DIRECTIVE 2008/1957/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 JUNE 2008 ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE COMMUNITY (RECAST) (TEXT WITH EEA RELEVANCE) |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 13146-9:2009+A1:2011 | Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness |
EN 13230-1:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
ISO 9001:2015 | Quality management systems — Requirements |
EN 13146-1:2012+A1:2014 | Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint |
EN 13674-1:2011+A1:2017 | Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
EN 13481-1:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions |
EN 13146-10:2017 | Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance |
EN 13146-2:2012 | Railway applications - Track - Test methods for fastening systems - Part 2: Determination of torsional resistance |
EN 13146-4:2012+A1:2014 | Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading |
EN 13146-8:2012 | Railway applications - Track - Test methods for fastening systems - Part 8: In service testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.