EN 13286-4:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
11-22-2021
03-05-2003
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Preparation of test portions
7 Procedure
8 Calculation and expression of results
9 Test report
Annex A (normative) Performance check of vibrating hammer
Annex B (normative) Compatibility test for graded
aggregates
This European Standard specifies a method for the determination of the relationship between the dry density and moisture content of a mixture when compacted using a vibrating hammer. It applies to mixtures used in road construction which contain not more than 30% by mass retained on the 20 mm test sieve.
Committee |
CEN/TC 227
|
DevelopmentNote |
Supersedes PREN 13286-4 (10/2005)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
I.S. EN 13286-4:2003 | Identical |
PN EN 13286-4 : 2006 | Identical |
NF EN 13286-4 : 2003 | Identical |
SN EN 13286-4 : 2003 | Identical |
UNE-EN 13286-4:2003 | Identical |
NEN EN 13286-4 : 2003 | Identical |
NBN EN 13286-4 : 2003 | Identical |
BS EN 13286-4:2003 | Identical |
DIN EN 13286-4:2003-07 | Identical |
NS EN 13286-4 : 1ED 2003 | Identical |
UNI EN 13286-4 : 2003 | Identical |
ONORM EN 13286-4 : 2003 | Identical |
BS EN 14227-15:2015 | Hydraulically bound mixtures. Specifications Hydraulically stabilized soils |
11/30240495 DC : 0 | BS EN 14227-5 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 5: HYDRAULIC ROAD BINDER BOUND MIXTURES |
DIN EN 15732:2013-01 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
BS EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA) |
DIN EN 14227-15:2016-02 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS |
UNI EN 15732 : 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
DIN EN 14227-5:2013-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 5: HYDRAULIC ROAD BINDER BOUND GRANULAR MIXTURES |
DIN EN 14227-3:2013-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 3: FLY ASH BOUND GRANULAR MIXTURES |
UNE-EN 14227-5:2014 | Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound granular mixtures |
BS EN 14227-13:2006 | Hydraulically bound mixtures. Specifications Soil treated by hydraulic road binder |
I.S. EN 14227-1:2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 1: CEMENT BOUND GRANULAR MIXTURES |
DIN EN 14227-10:2006-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 10: SOIL TREATED BY CEMENT |
I.S. EN 13286-1:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING |
DIN EN 14227-14:2006-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 14: SOIL TREATED BY FLY ASH |
CEN/TR 15463:2007 | Characterization of sludges - Physical consistency - Thixotropic behaviour and piling behaviour |
UNE-EN 13285:2010 | Unbound mixtures - Specifications |
I.S. EN 14227-12:2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 12: SOIL TREATED BY SLAG |
I.S. EN 14227-13:2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 13: SOIL TREATED BY HYDRAULIC ROAD BINDER |
12/30256420 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
11/30240498 DC : 0 | BS EN 14227-2 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND MIXTURES |
15/30328074 DC : 2015-12 | BS EN 16907-4 - EARTHWORKS - PART 4: SOIL TREATMENT WITH LIME AND/OR HYDRAULIC BINDERS |
BS EN 13285:2010 | Unbound mixtures. Specifications |
14/30303776 DC : 0 | BS EN 13285 - UNBOUND MIXTURES - SPECIFICATIONS |
PREN 15732 : DRAFT 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
I.S. EN 14227-15:2015 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS |
DIN EN 14227-2:2013-08 | Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures; German version EN 14227-2:2013 |
BS EN 13286-1:2003 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Introduction, general requirements and sampling |
I.S. EN 14227-2:2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND MIXTURES |
I.S. EN 14227-5:2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 5: HYDRAULIC ROAD BINDER BOUND GRANULAR MIXTURES |
DIN EN 13286-51:2005-03 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 51: METHOD FOR THE MANUFACTURE OF TEST SPECIMENS OF HYDRAULICALLY BOUND MIXTURES USING VIBRATING HAMMER COMPACTION |
I.S. EN 14227-3:2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 3: FLY ASH BOUND GRANULAR MIXTURES |
04/30111539 DC : DRAFT JULY 2004 | EN 14227-10 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 10: SOIL CEMENT AND CEMENT STABILISED SOILS |
11/30240501 DC : 0 | BS EN 14227-3 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 3: FLY ASH BOUND MIXTURES |
UNI EN 13285 : 2010 | UNBOUND MIXTURES - SPECIFICATION |
I.S. EN 15732:2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
UNE-EN 14227-15:2017 | Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils |
NF EN 13285 : 2010 | UNBOUND MIXTURES - SPECIFICATION |
EN 13285:2010 | Unbound mixtures - Specifications |
PREN 14227-3 : DRAFT 2011 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 3: FLY ASH BOUND MIXTURES |
BS EN 14227-14:2006 | Hydraulically bound mixtures. Specifications Soil treated by fly ash |
BS EN 14227-5:2013 | Hydraulically bound mixtures. Specifications Hydraulic road binder bound granular mixtures |
EN 14227-2:2013 | Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures |
UNI CEN/TR 15463 : 2012 | CHARACTERIZATION OF SLUDGES - PHYSICAL CONSISTENCY - THIXOTROPIC BEHAVIOUR AND PILING BEHAVIOUR |
UNI EN 14227-3 : 2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 3: FLY ASH BOUND GRANULAR MIXTURES |
UNI EN 14227-2 : 2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND GRANULAR MIXTURES |
UNI EN 14227-1 : 2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 1: CEMENT BOUND GRANULAR MIXTURES |
UNI EN 14227-5 : 2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 5: HYDRAULIC ROAD BINDER BOUND GRANULAR MIXTURES |
PD CEN/TR 15463:2007 | Characterization of sludges. Physical consistency. Thixotropic behaviour and piling behaviour |
I.S. EN 14227-14:2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 14: SOIL TREATED BY FLY ASH |
07/30170936 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
11/30240489 DC : 0 | BS EN 14227-1 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 1: CEMENT BOUND GRANULAR MIXTURES |
14/30294810 DC : 0 | BS EN 14227-15 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS |
I.S. EN 13285:2010 | UNBOUND MIXTURES - SPECIFICATIONS |
S.R. CEN TR 15463:2007 | CHARACTERIZATION OF SLUDGES - PHYSICAL CONSISTENCY - THIXOTROPIC BEHAVIOUR AND PILING BEHAVIOUR |
15/30326284 DC : 0 | BS EN 16907-2 - EARTHWORKS - PART 2: CLASSIFICATION OF MATERIALS |
PREN 14227-1 : DRAFT 2011 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 1: CEMENT BOUND GRANULAR MIXTURES |
BS EN 14227-12:2006 | Hydraulically bound mixtures. Specifications. Soil treated by slag |
BS EN 14227-2:2013 | Hydraulically bound mixtures. Specifications Slag bound granular mixtures |
BS EN 13286-7:2004 | Unbound and hydraulically bound mixtures Cyclic load triaxial test for unbound mixtures |
BS EN 14227-3:2013 | Hydraulically bound mixtures. Specifications Fly ash bound granular mixtures |
UNE-EN 14227-2:2014 | Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures |
UNE-EN 14227-1:2014 | Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures |
UNE-EN 14227-3:2014 | Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound granular mixtures |
BS EN 14227-10:2006 | Hydraulically bound mixtures. Specifications Soil treated by cement |
BS EN 14227-1:2013 | Hydraulically bound mixtures. Specifications Cement bound granular mixtures |
EN 14227-10:2006 | Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement |
EN 14227-3:2013 | Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound granular mixtures |
EN 14227-14:2006 | Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash |
EN 14227-12:2006 | Hydraulically bound mixtures - Specifications - Part 12: Soil treated by slag |
EN 14227-15:2015 | Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils |
EN 14227-13:2006 | Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder |
EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
EN 14227-5:2013 | Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound granular mixtures |
EN 14227-1:2013 | Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures |
UNE-EN 15732:2014 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
I.S. EN 14227-10:2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 10: SOIL TREATED BY CEMENT |
PREN 14227-5 : DRAFT 2011 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 5: HYDRAULIC ROAD BINDER BOUND MIXTURES |
DIN EN 13285:2010-12 | UNBOUND MIXTURES - SPECIFICATIONS |
DIN EN 14227-1:2013-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 1: CEMENT BOUND GRANULAR MIXTURES |
DIN EN 13286-7:2004-04 | Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures; German version EN 13286-7:2004 |
BS EN 13286-51:2004 | Unbound and hydraulically bound mixtures Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction |
DIN EN 14227-13:2006-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 13: SOIL TREATED BY HYDRAULIC ROAD BINDER |
EN 13286-7:2004 | Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures |
DIN EN 14227-12:2006-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 12: SOIL TREATED BY SLAG |
EN 13286-1:2003 | Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling |
EN 13286-51:2004 | Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction |
EN 13286-1:2003 | Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling |
EN 932-2:1999 | Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.