EN 13274-7:2008
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
Superseded date
06-26-2019
Superseded by
Published date
01-23-2008
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Pre-requisites
5 Test requirements
5.1 General
5.2 Penetration test
5.3 Exposure test
5.4 Storage test
6 Sodium chloride test method
6.1 Principle
6.2 Test equipment
6.3 Test conditions
6.4 Procedure
6.5 Calculation of the penetration
7 Paraffin oil test method
7.1 Principle
7.2 Test equipment
7.3 Test conditions at filter
7.4 Procedure
7.5 Calculation of the penetration
Annex A (normative) Test results - Uncertainty of measurements
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements
of EU Directives
This European Standard specifies the procedure for testing particle filter penetration for respiratory protective devices.
| Committee |
CEN/TC 79
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| I.S. EN 13274-7:2008 | Identical |
| NF EN 13274-7 : 2008 | Identical |
| GOST EN 13274-7 : 2012 | Identical |
| NBN EN 13274-7 : 2008 | Identical |
| UNI EN 13274-7 : 2008 | Identical |
| SN EN 13274-7 : 2008 | Identical |
| NS EN 13274-7 : 2ED 2008 | Identical |
| BS EN 13274-7:2008 | Identical |
| DIN EN 13274-7:2008-04 | Identical |
| NEN EN 13274-7 : 2008 | Identical |
| PN EN 13274-7 : 2008 | Identical |
| UNE-EN 13274-7:2008 | Identical |
| ONORM EN 13274-7 : 2008 | Identical |
| GOST R EN 13274-7 : 2009 | Identical |
| 12/30268424 DC : 0 | BS EN 12341 - AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM10 OR PM2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER |
| 07/30163576 DC : 0 | BS EN 14387 AMD 1 - RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| PD CEN/TR 16269:2011 | Ambient air. Guide for the measurement of anions and cations in PM2,5 |
| UNE-EN 1827:1999 | RESPIRATORY PROTECTIVE DEVICES. HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY. REQUIREMENTS, TESTING, MARKING |
| BS EN 12341:2014 | Ambient air. Standard gravimetric measurement method for the determination of the PM<sub>10</sub> or PM<sub>2,5</sub> mass concentration of suspended particulate matter |
| DIN EN 15549:2008-06 | Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air |
| DIN EN 14907:2005-11 | AMBIENT AIR QUALITY - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[2,5] MASS FRACTION OF SUSPENDED PARTICULATE MATTER |
| EN 12341:2014 | Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter |
| I.S. EN 14907:2005 | AMBIENT AIR QUALITY - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[2,5] MASS FRACTION OF SUSPENDED PARTICULATE MATTER |
| BS EN 15549:2008 | Air quality. Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air |
| 17/30359208 DC : 0 | BS EN 14387 - RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| PREN 14387 : DRAFT 2017 | RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| 12/30260963 DC : 0 | BS EN 12341 - AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM 10 OR PM 2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER |
| 08/30178266 DC : DRAFT SEP 2008 | BS EN 405 AMD1 - RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
| S.R. CEN/TS 16645:2014 | AMBIENT AIR - METHOD FOR THE MEASUREMENT OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, DIBENZ[A,H]ANTHRACENE, INDENO[1,2,3-CD]PYRENE AND BENZO[GHI]PERYLENE |
| DIN EN 12941:2009-02 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| DIN EN 12942:2009-02 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| DIN EN 14387:2008-05 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking (includes Amendment A1:2008) |
| UNE-EN 12341:2015 | Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter |
| I.S. EN 1827:1999 | RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
| EN 14387:2004+A1:2008 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
| DIN EN 12341:1999-03 | AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[10] OR PM[2],[5] MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER |
| I.S. EN 405:2002 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 12341:2014 | AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[10] OR PM[2,5] MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER |
| I.S. EN 14387:2004 | RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| DIN EN 1827:2009-11 | Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking (includes Amendment A1:2009) |
| PREN 12941 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A LOOSE FITTING RESPIRATORY INTERFACE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 12942:1999 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| BS EN 16913:2017 | Ambient air. Standard method for measurement of NO<sub>3</sub><sup>-</sup>, SO<sub>4</sub><sup>2-</sup>, Cl<sup>-</sup>, NH<sub>4</sub><sup>+</sup>, Na<sup>+</sup>, K<sup>+</sup>, Mg<sup>2+</sup>, Ca<sup>2+</sup> in PM2,5 as deposited on filters |
| 08/30178269 DC : 0 | BS EN 1827:1999/A1 - RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
| PREN 12341 : DRAFT 2012 | AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM 10 OR PM 2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER |
| PREN 12942 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - POWER FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| S.R. CEN/TR 16269:2011 | AMBIENT AIR - GUIDE FOR THE MEASUREMENT OF ANIONS AND CATIONS IN PM2,5 |
| I.S. EN 15549:2008 | AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF BENZO[A]PYRENE IN AMBIENT AIR |
| DIN EN 12341:2014-08 | Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter |
| DIN EN 149:2009-08 | RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING |
| DIN EN 405 : 2009-08 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
| BS EN 14907:2005 | Ambient air quality. Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter |
| BS EN 14902:2005 | Ambient air quality. Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter |
| UNI EN 1827 : 2009 | RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
| UNI EN 12942 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| UNI EN 405 : 2009 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
| UNI EN 12941 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| UNI EN 14902 : 2005 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER |
| UNI EN 149 : 2009 | RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING |
| UNI EN 12341 : 2014 | AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM10 OR PM2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER |
| I.S. EN 12941:1998 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| 08/30178263 DC : DRAFT SEP 2008 | BS EN 149 AMD1 - RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING |
| UNI EN 15549 : 2008 | AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF BENZO[A]PYRENE IN AMBIENT AIR |
| UNI EN 14387 : 2008 | RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 149:2001 | RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING |
| BS EN 405 : 2002 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
| BS EN 12941 : 1999 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| DIN EN 14902:2005-10 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER |
| EN 1827:1999+A1:2009 | Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
| EN 405:2001+A1:2009 | Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking |
| EN 14907:2005 | Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter |
| EN 15549:2008 | Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air |
| EN 149:2001+A1:2009 | Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking |
| I.S. EN 16913:2017 | AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS |
| PD CEN/TS 16645:2014 | Ambient air. Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene |
| UNI CEN/TS 16645 : 2014 | AMBIENT AIR - METHOD FOR THE MEASUREMENT OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, DIBENZ[A,H]ANTHRACENE, INDENO[1,2,3-CD]PYRENE AND BENZO[GHI]PERYLENE |
| EN 16913:2017 | Ambient air - Standard method for measurement of NO3¯, SO4²¯, Cl¯, NH4+, Na+, K+, Mg²+, Ca²+ in PM2,5 as deposited on filters |
| DIN EN 16913:2015-10 (Draft) | AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS |
| BS EN 14387 : 2004 | RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| BS EN 149 : 2001 | RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING |
| BS EN 12942 : 1999 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| BS EN 1827 : 1999 | RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
| CEN/TR 16269:2011 | Ambient air - Guide for the measurement of anions and cations in PM2,5 |
| CEN/TS 16645:2014 | Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene |
| ONORM EN 12942 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
| EN 13274-5:2001 | Respiratory protective devices - Methods of test - Part 5: Climatic conditions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.