EN 13230-1:2016
Current
The latest, up-to-date edition.
Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements
05-11-2016
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Common characteristics
5 Materials
6 General requirements
7 Product testing
8 Quality control
Annex A (informative) - Test method to determine
the Taber Wear index for a fine aggregate
Annex B (informative) - Test method for freeze-thaw
resistance
Annex C (informative) - Test method for measuring the
water absorption of concrete at atmospheric pressure
Annex D (informative) - Definition and recommendation
for measurement of rail seat inclination and twist
between rail seats
Annex E (informative) - Surface finish
Annex F (informative) - Quality control during
manufacturing - Routine tests and frequency
of testing
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2008/57/EC
Bibliography
This part of the EN 13230 series defines technical criteria and control procedures which need to be satisfied by the constituent materials and the finished concrete sleepers and bearers, i.e.: precast concrete sleepers, twin-block reinforced sleepers, bearers for switches and crossings, and special elements for railway tracks.The main requirement of concrete sleepers and bearers is the transmission of vertical, lateral and longitudinal loads from the rails to the ballast or other support. In use, they are also exposed to frost damage and to moisture, which can result in detrimental chemical reactions within the sleeper.In this standard mechanical tests are defined which provide assurance of the capability of sleepers or bearers to resist repetitive loading and provide sufficient durability. In addition, controls are placed on manufacturing processes and tests to ensure that the concrete will not suffer degradation in service through chemical reaction and frost damage.
Committee |
CEN/TC 256
|
DevelopmentNote |
Supersedes PREN 13230-1. (05/2016)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
PN EN 13230-1 : 2016 | Identical |
SN EN 13230-1:2016 | Identical |
NEN EN 13230-1 : 2016 | Identical |
NS EN 13230-1 : 2016 | Identical |
DIN EN 13230-1:2014-04 (Draft) | Identical |
NBN EN 13230-1 : 2016 | Identical |
UNE-EN 13230-1:2016 | Identical |
BS EN 13230-1:2016 | Identical |
I.S. EN 13230-1:2016 | Identical |
UNI EN 13230-1 : 2009 | Identical |
DIN EN 13230-1 E : 2016 | Identical |
NF EN 13230-1 : 2016 | Identical |
DIN EN 13230-1:2016-11 | Identical |
07/30166070 DC : 0 | BS EN 13230-4 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 4: PRESTRESSED BEARERS FOR SWITCHES AND CROSSINGS |
10/30205098 DC : DRAFT JUNE 2010 | BS EN 13481-2 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
DIN EN 16432-2:2015-04 (Draft) | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
I.S. EN 16432-2:2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
PREN 13146-3 : DRAFT 2009 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 3: DETERMINATION OF ATTENUATION OF IMPACT LOADS |
DIN EN 13481-2:2012-08 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
UNE-EN 13230-5:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements |
UNE-EN 13230-4:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings |
BS EN 13230-2:2016 | Railway applications. Track. Concrete sleepers and bearers Prestressed monoblock sleepers |
EN 13230-3:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
EN 13230-2:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers |
EN 13146-3:2012 | Railway applications - Track - Test methods for fastening systems - Part 3: Determination of attenuation of impact loads |
EN 13481-5:2012+A1:2017 | Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel |
EN 13230-5:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements |
BS EN 13230-5:2016 | Railway applications. Track. Concrete sleepers and bearers Special elements |
BS EN 13146-3:2012 | Railway applications. Track. Test methods for fastening systems Determination of attenuation of impact loads |
I.S. EN 13481-5:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
I.S. EN 13230-5:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 5: SPECIAL ELEMENTS |
I.S. EN 13230-3:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
I.S. EN 13146-3:2012 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 3: DETERMINATION OF ATTENUATION OF IMPACT LOADS |
I.S. EN 13481-2:2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
09/30205077 DC : 0 | BS EN 13146-3 - RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 3: DETERMINATION OF ATTENUATION OF IMPACT LOADS |
BS EN 16432-2:2017 | Railway applications. Ballastless track systems System design, subsystems and components |
I.S. EN 13230-4:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 4: PRESTRESSED BEARERS FOR SWITCHES AND CROSSINGS |
UNE-EN 13230-2:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers |
UNI EN 13146-3 : 2012 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 3: DETERMINATION OF ATTENUATION OF IMPACT LOADS |
BS EN 16730:2016 | Railway applications. Track. Concrete sleepers and bearers with under sleeper pads |
DIN EN 16730:2016-09 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
07/30166073 DC : 0 | BS EN 13230-5 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 5: SPECIAL ELEMENTS |
07/30166067 DC : 0 | BS EN 13230-3 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
DIN EN 13481-5:2012-08 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
BS EN 13481-5 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 5: FASTENING SYSTEMS FOR SLAB TRACK WITH RAIL ON THE SURFACE OR RAIL EMBEDDED IN A CHANNEL |
UNE-EN 13146-3:2012 | Railway applications - Track - Test methods for fastening systems - Part 3: Determination of attenuation of impact loads |
UNE-EN 13230-3:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
BS EN 13230-3:2016 | Railway applications. Track. Concrete sleepers and bearers Twin-block reinforced sleepers |
UNE-EN 13481-2:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
I.S. EN 13230-2:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 2: PRESTRESSED MONOBLOCK SLEEPERS |
BS EN 13481-2 : 2012 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS |
BS EN 13230-4:2016 | Railway applications. Track. Concrete sleepers and bearers Prestressed bearers for switches and crossings |
EN 16432-2:2017 | Railway applications - Ballastless track systems - Part 2: System design, subsystems and components |
EN 16730:2016 | Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
UNE-EN 16730:2017 | Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
03/314354 DC : DRAFT SEP 2003 | BS EN 13232-7 - RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - PART 7: CROSSINGS WITH MOVEABLE PARTS |
I.S. EN 16730:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
DIN EN 13146-3:2012-06 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 3: DETERMINATION OF ATTENUATION OF IMPACT LOADS |
EN 13230-4:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings |
EN 13481-2:2012+A1:2017 | Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
UNE-EN 13481-5:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel |
EN 13481-5:2012+A1:2017 | Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel |
EN 13481-2:2012+A1:2017 | Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
EN 13481-7:2012 | Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
EN 13230-4:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings |
2008/57/EC : 2008 AMD 5 2014 | DIRECTIVE 2008/1957/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 JUNE 2008 ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE COMMUNITY (RECAST) (TEXT WITH EEA RELEVANCE) |
EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
PREN 13230-6 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 6: DESIGN |
EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
EN 13230-2:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers |
EN 12620:2002+A1:2008 | Aggregates for concrete |
UIC 713 : 1ED 2004 | DESIGN OF MONOBLOCK CONCRETE SLEEPERS |
EN 13230-3:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.