EN 1301-1:2008
Current
Current
The latest, up-to-date edition.
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery
Published date
09-17-2008
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Requirements
5.1 Production and manufacturing processes
5.2 Quality control
5.3 Chemical composition
5.4 Mechanical properties
5.5 Freedom from defects
5.6 Tolerances on dimensions
5.7 Other properties
5.8 Temper of delivery
6 Test procedure
6.1 Sampling
6.2 Methods of tests
6.3 Retests
7 Delivery documents and inspection documents
7.1 Certificate of mass and analysis
7.2 Inspection certificate
8 Marking
9 Packaging
10 Complaints of non-conformity
Bibliography
This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy drawn wire for general engineering applications.It does not apply for aeronautical application.It applies to drawn wires, except for electrical or welding purposes.It does not apply to drawing stock.
| Committee |
CEN/TC 132
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 1301-1:2009 | Identical |
| UNI EN 1301-1 : 2008 | Identical |
| NF EN 1301-1 : 2008 | Identical |
| BS EN 1301-1:2008 | Identical |
| NBN EN 1301-1 : 2009 | Identical |
| NEN EN 1301-1 : 2008 | Identical |
| I.S. EN 1301-1:2008 | Identical |
| PN EN 1301-1 : 2010 | Identical |
| DIN EN 13011:2001-01 | Identical |
| NS EN 1301-1 : 2ED 2008 | Identical |
| SN EN 1301-1 : 2008 | Identical |
| DIN EN 1301-1:2008-12 | Identical |
| UNE-EN 13195:2014 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 13195:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| ONORM EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| EN 1301-3:2008 | Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions |
| EN 13195:2013 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| EN 13195-1 : 2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
| DIN EN 13195-1:2002-11 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| UNI EN 13195 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| I.S. EN 1301-2:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 2: MECHANICAL PROPERTIES |
| I.S. EN 1301-3:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 3: TOLERANCES ON DIMENSIONS |
| I.S. EN 13195-1:2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODU- PART 1: SPECIFICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| 05/30133060 DC : 0 | EN 1090-3 - EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| DIN EN 1301-2:2008-12 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 2: MECHANICAL PROPERTIES |
| BS EN 1301-3:2008 | Aluminium and aluminium alloys. Drawn wire Tolerances on dimensions |
| BS EN 13195-1:2002 | Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore) Specifications |
| UNI EN 1301-3 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 3: TOLERANCES ON DIMENSIONS |
| UNI EN 1301-2 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 2: MECHANICAL PROPERTIES |
| BS EN 13195:2013 | Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN 13195:2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| DIN EN 1301-3:2008-12 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 3: TOLERANCES ON DIMENSIONS |
| DIN EN 15088:2016-09 (Draft) | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016 |
| BS EN 15088:2005 | Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery |
| EN 15088:2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
| 04/30125694 DC : DRAFT NOV 2004 | EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| BS EN 1301-2:2008 | Aluminium and aluminium alloys. Drawn wire Mechanical properties |
| EN 1301-2:2008 | Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties |
| DIN EN 15088:2006-03 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005 |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 1301-2:2008 | Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| EN 1301-3:2008 | Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions |
| ISO 7438:2016 | Metallic materials Bend test |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 7802:2013 | Metallic materials — Wire — Wrapping test |
| EN 14361:2004 | Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
| ISO 7801:1984 | Metallic materials — Wire — Reverse bend test |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| ISO 7800:2012 | Metallic materials — Wire — Simple torsion test |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN ISO 7438:2016 | Metallic materials - Bend test (ISO 7438:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.