EN 12889:2000
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Trenchless construction and testing of drains and sewers
07-31-2000
01-19-2000
Foreword
1 Scope
2 Normative references
3 Definitions
4 General
5 Construction components and materials
5.1 General
5.2 Pipes and joints
5.3 Manholes and inspection chambers
5.4 Delivery, handling and transportation
on site
5.5 Storage
6 Techniques
6.1 Unmanned techniques
6.2 Manned techniques
7 Requirements
7.1 Safeguarding design assumptions
7.2 Special requirements
7.3 Safeguarding design assumptions
7.4 Information about ground conditions
7.5 Data collection during installation
7.6 Stability during construction
7.7 Overcut
7.8 Overbreak
7.9 Settlement and heave
7.10 Deviation in line and level
8 Inspection and/or testing of pipelines after
installation
8.1 Visual inspection
8.2 Leaktightness
9 Procedures and requirements for testing gravity
pipelines
9.1 General
9.2 Testing with air (Method "L")
9.3 Testing with water (Method "W")
9.4 Testing of each individual joint
10 Testing of pressure pipelines
11 Qualification
Annex A (informative) Abstract from Council Directive
of 17 September 1990 on the procurement
procedures of entities operating in the water,
energy, transport and telecommunication sectors
This European Standard is applicable to the trenchless construction and testing of new drains and new sewers in the ground, which are normally operating as gravity pipelines, formed using prefabricated pipes and their joints. The trenchless construction and testing of drains and sewers operating under pressure is also covered by this European Standard together with prEN 805 as appropriate. This European Standard also applies to trenchless replacement techniques. Renovation techniques for existing sewers and drains are not covered by this European Standard.
| Committee |
CEN/TC 165
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| SN EN 12889 : 2000 | Identical |
| I.S. EN 12889:2000 | Identical |
| UNI EN 12889 : 2002 | Identical |
| NBN EN 12889 : 2000 | Identical |
| NEN EN 12889 : 2000 | Identical |
| BS EN 12889:2000 | Identical |
| NF EN 12889 : 2000 | Identical |
| DIN EN 12889:2000-03 | Identical |
| UNE-EN 12889:2000 | Identical |
| NS EN 12889 : 1ED 2000 | Identical |
| PN EN 12889 : 2003 | Identical |
| DS EN 12889 : 2000 | Identical |
| ONORM EN 12889 : 2000 | Identical |
| 02/103343 DC : DRAFT MAY 2002 | PREN 14457 - GENERAL REQUIREMENTS FOR COMPONENTS SPECIFICALLY DESIGNED FOR USE IN TRENCHLESS CONSTRUCTION OF DRAINS AND SEWERS |
| 17/30341312 DC : 0 | BS EN ISO 21225-1 - PLASTICS PIPING SYSTEMS FOR THE TRENCHLESS REPLACEMENT OF UNDERGROUND PIPELINE NETWORKS - PART 1: REPLACEMENT ON THE LINE BY PIPE BURSTING AND PIPE EXTRACTION |
| PREN 15885 : DRAFT 2015 | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION, REPAIR AND REPLACEMENT OF DRAINS AND SEWERS |
| EN ISO 11295:2017 | Classification and information on design and applications of plastics piping systems used for renovation and replacement (ISO 11295:2017) |
| BS EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking |
| BS EN 295-1:2013 | Vitrified clay pipe systems for drains and sewers Requirements for pipes, fittings and joints |
| 13/30295203 DC : 0 | BS EN 1610 - CONSTRUCTION AND TESTING OF DRAINS AND SEWERS |
| 17/30341315 DC : 0 | BS EN ISO 21225-2 - PLASTICS PIPING SYSTEMS FOR THE TRENCHLESS REPLACEMENT OF UNDERGROUND PIPELINE NETWORKS - PART 2: REPLACEMENT OFF THE LINE BY HORIZONTAL DIRECTIONAL DRILLING AND IMPACT MOLING |
| PREN 295-1 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS |
| PREN 752 : DRAFT 2015 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| BS EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| DIN EN 752:2015-10 (Draft) | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| I.S. EN 295-7:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
| I.S. EN 1610:2015 | CONSTRUCTION AND TESTING OF DRAINS AND SEWERS |
| I.S. EN 295-1:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS |
| I.S. EN ISO 11295:2017 | CLASSIFICATION AND INFORMATION ON DESIGN AND APPLICATIONS OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION AND REPLACEMENT (ISO 11295:2017) |
| I.S. EN 16932-1:2018 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| EN 16932-1:2018 | Drain and sewer systems outside buildings - Pumping systems - Part 1: General requirements |
| DIN EN 295-7:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
| UNE-EN 1610:2016 | Construction and testing of drains and sewers |
| I.S. EN 752:2017 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| ISO 21225-1:2018 | Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 1: Replacement on the line by pipe bursting and pipe extraction |
| 15/30325882 DC : 0 | BS EN 16932-1 - DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| PREN 1610 : DRAFT 2013 | CONSTRUCTION AND TESTING OF DRAINS AND SEWERS |
| DIN EN 295-1:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS |
| BS EN 1610:2015 | Construction and testing of drains and sewers |
| UNE-EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking |
| EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking |
| EN 1610:2015 | Construction and testing of drains and sewers |
| EN 752:2017 | Drain and sewer systems outside buildings - Sewer system management |
| EN 14457:2004 | General requirements for components specifically designed for use in trenchless construction of drains and sewers |
| EN 295-1:2013 | Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints |
| 16/30332542 DC : 0 | BS EN 15885 - CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION, REPAIR AND REPLACEMENT OF DRAINS AND SEWERS |
| 10/30216984 DC : 0 | BS EN 295-1 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS |
| BS EN ISO 11295:2017 | Classification and information on design and applications of plastics piping systems used for renovation and replacement |
| ISO 11295:2017 | Classification and information on design and applications of plastics piping systems used for renovation and replacement |
| UNE-EN 295-1:2013 | Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints |
| BS EN 14457:2004 | General requirements for components specifically designed for use in trenchless construction of drains and sewers |
| EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| DIN EN 14457:2004-09 | General requirements for components specifically designed for use in trenchless construction of drains and sewers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.