EN 1279-2:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
02-28-2019
11-13-2002
Foreword
1 Scope
2 Normative references
3 Terms and definitions, abbreviations and symbols
3.1 Terms and definitions
3.2 Abbreviations
3.3 Symbols
4 Requirements
4.1 Moisture penetration index
4.2 Edge seal strength
4.3 Gas leakage rate
5 Method of test
5.1 Principle
5.2 Climate conditions in cabinet
5.3 Number, description and selection of the test
specimens
5.4 Procedure
6 Methods of measurement
6.1 Measurement of dew point temperature
6.2 Measurement of moisture content
6.2.1 General
6.2.2 Moisture content of desiccant in bulk
6.2.3 Moisture content of desiccant incorporated
in organic spacer
6.2.4 Moisture content in insulating glass units
without desiccant
7 Test report
Annex A (normative) - Reference method for dew point
temperature measurement
A.1 General
A.2 Apparatus and materials
A.3 Procedure
Annex B (normative) - Moisture content measurement
according to the 950 degree C drying method
B.1 Applicability
B.2 Apparatus, materials and preparatory work
B.3 Initial and final moisture content
B.4 Standard moisture adsorption capacity
Annex C (normative) - Moisture content measurement
according to the Karl Fischer method
C.1 Applicability
C.2 Apparatus, materials and preparatory work
C.3 Initial and final moisture content
C.4 Standard moisture adsorption capacity
Annex D (normative) - Establishing the standard moisture
adsorption capacity of desiccants
D.1 General
D.2 Appropriate information
D.3 Generally accepted values for desiccant in bulk
D.4 Desiccant manufacturing
Bibliography
This draft European Standard is the product standard fo insulating glass units, which defines insulating glass units, and ensures by means of an adequate evaluation of conformity to this standard that: - energy savings are made because the U-value and solar factor do not change significantly; - health because sound reduction and vision do not change significantly; - safety is provided because mechanical resistance does not change significantly.
Committee |
CEN/TC 129
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
SN EN 1279-2 : 2002 | Identical |
NEN EN 1279-2 : 2002 | Identical |
I.S. EN 1279-2:2002 | Identical |
I.S. EN 1279-2:2018 | Identical |
NBN EN 1279-2 : 2003 | Identical |
DIN EN 1279-2:2018-10 | Identical |
BS EN 1279-2:2018 | Identical |
ÖNORM EN 1279-2:2019 | Identical |
UNI EN 1279-2:2018 | Identical |
DIN EN 1279-2:2015-08 (Draft) | Identical |
UNE-EN 1279-2:2003 | Identical |
PN EN 1279-2 : 2004 | Identical |
NF EN 1279-2 : 2003 | Identical |
NS EN 1279-2 : 1ED 2003 | Identical |
BS EN 1279-2:2002 | Identical |
UNI EN 1279-2 : 2004 | Identical |
ONORM EN 1279-2 : 2003 | Identical |
NEN EN 1279-2:2018 | Identical |
PREN 13830 : DRAFT 2013 | CURTAIN WALLING - PRODUCT STANDARD |
BS EN 1279-1:2004 | Glass in building. Insulating glass units Generalities, dimensional tolerances and rules for the system description |
UNI EN 1279-5 : 2010 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
BS EN 357:2004 | Glass in building. Fire resistant glazed elements with transparent or translucent glass products. Classification of fire resistance |
EN 1096-3:2012 | Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings |
DIN EN 13830:2015-07 | CURTAIN WALLING - PRODUCT STANDARD |
BS EN 50583-1:2016 | Photovoltaics in buildings BIPV modules |
13/30281348 DC : 0 | BS EN 13830 - CURTAIN WALLING - PRODUCT STANDARD |
I.S. EN 1279-1:2004 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION |
I.S. EN 1279-3:2002 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 3: LONG TERM TEST METHOD AND REQUIREMENTS FOR GAS LEAKAGE RATE AND FOR GAS CONCENTRATION TOLERANCES |
DIN EN 1279-5:2015-08 (Draft) | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
I.S. EN 13830:2015 | CURTAIN WALLING - PRODUCT STANDARD |
I.S. EN 1096-3:2012 | GLASS IN BUILDING - COATED GLASS - PART 3: REQUIREMENTS AND TEST METHODS FOR CLASS C AND D COATINGS |
I.S. EN 357:2004 | GLASS IN BUILDING - FIRE RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE |
EN 1279-5:2005+A2:2010 | Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
12/30266506 DC : 0 | BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS |
NF EN 1279-5 : 2005 + A2 2010 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
EN 1279-3:2002 | Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
I.S. EN 1279-5:2005 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
DIN EN 1096-3:2012-04 | Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings |
UNE-EN 13830:2016 | Curtain walling - Product standard |
UNE-EN 1096-3:2012 | Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings |
EN 13830:2015 | Curtain walling - Product standard |
UNI EN 1096-3 : 2012 | GLASS IN BUILDING - COATED GLASS - PART 3: REQUIREMENTS AND TEST METHODS FOR CLASS C AND D COATINGS |
03/100996 DC : DRAFT MAR 2003 | PREN 13022-1 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING SYSTEMS - SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING |
PREN 50583 : DRAFT 2012 | PHOTOVOLTAICS IN BUILDINGS |
I.S. EN 50583-1:2016 | PHOTOVOLTAICS IN BUILDINGS - PART 1: BIPV MODULES |
BS EN 13830:2015 | Curtain walling. Product standard |
EN 357:2004 | Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance |
UNE-EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
BS EN 1279-3:2002 | Glass in building. Insulating glass units Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
08/30172148 DC : DRAFT MAY 2008 | BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING |
BS EN 1279-5 : 2005 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
DIN EN 1279-1:2015-08 (Draft) | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION |
BS EN 1096-3:2012 | Glass in building. Coated glass Requirements and test methods for class C and D coatings |
EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
DIN EN 1279-3:2003-05 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 3: LONG TERM TEST METHOD AND REQUIREMENTS FOR GAS LEAKAGE RATE AND FOR GAS CONCENTRATION TOLERANCES |
DIN EN 357:2005-02 | GLASS IN BUILDING - FIRE-RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE |
UNE-EN 1279-5:2006 | Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
PREN 1279-1 : DRAFT 95 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES AND DIMENSIONAL TOLERANCES |
EN 1279-6:2002 | Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
EN 572-2:2012 | Glass in building - Basic soda lime silicate glass products - Part 2: Float glass |
EN 1279-3:2002 | Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
EN 1279-4:2002 | Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 9001:2015 | Quality management systems — Requirements |
EN 572-1:2012+A1:2016 | Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties |
ISO 760:1978 | Determination of water Karl Fischer method (General method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.