EN 12697-33:2003+A1:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor
02-18-2022
07-04-2007
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
3.1 Terms and definitions
3.2 Symbols and abbreviations
4 Principle
5 Apparatus
5.1 Method using a wheel or two wheels fitted with pneumatic tyres
5.2 Methods using a smooth steel roller
5.2.1 Smooth steel roller
5.2.2 Steel roller used on wheel fitted with pneumatic tyres
5.3 Method using a roller running on vertical sliding steel plates
6 Preparation
6.1 Mass of bituminous mixture
6.2 Filling the mould
7 Compaction
7.1 Method using wheels fitted with pneumatic tyres
7.1.1 Test conditions
7.1.2 Compaction
7.2 Methods using a smooth steel roller
7.2.1 General
7.2.2 Compaction by a specified energy
7.2.3 Compaction with controlled compaction energy
7.2.4 Compaction to obtain a specified voids content or
compaction degree
7.3 Method using a roller running on vertical sliding steel plates
7.4 Removing the mould
8 Test report
This European Standard specifies the methods for compacting parallelepipedal specimens (slabs) of bituminous mixtures, to be used directly for subsequent testing, or from which test specimens are cut.For a given mass of bituminous mixture, the specimens are prepared either under controlled compaction energy, or until a specified volume and therefore void content is obtained.This European Standard describes the following methods of compaction:-pneumatic tyre method,-steel roller method,-sliding plates method.This European Standard is applicable to bituminous mixtures manufactured in the laboratory or in a mixing plant.
Committee |
CEN/TC 227
|
DevelopmentNote |
2003 Edition Re-Issued in July 2007 & incorporates AMD 1 2007. (07/2007)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
DS EN 12697-33 : 2004 + A1 2007 | Identical |
DS/EN 12697-33:2019 | Identical |
PN EN 12697-33 : 2008 + A1 2008 | Identical |
SN 670433A-NA : 2007 | Identical |
NBN EN 12697-33 : 2004 + A1 2007 | Identical |
BS EN 12697-33:2003 | Identical |
DIN EN 12697-33:2013-12 (Draft) | Identical |
DIN EN 12697-33:2007-11 | Identical |
UNI EN 12697-33 : 2007 | Identical |
UNE-EN 12697-33:2006 | Identical |
UNI EN 12697-33 : 2019 | Identical |
PN-EN 12697-33:2019-03 | Identical |
SN EN 12697-33 : 2004 + A1 2007 | Identical |
NS EN 12697-33 : 2003 + A1 2007 | Identical |
ONORM EN 12697-33 : 2007 | Identical |
I.S. EN 12697-33:2004 | Identical |
I.S. EN 12697-33:2019 | Identical |
NEN EN 12697-33 : 2019 | Identical |
NEN EN 12697-33 : 2004 + A1 2007 | Identical |
NF EN 12697-33 : 2004 + A1 2007 | Identical |
BS EN 12697-33:2019 | Identical |
UNE-EN 12697-33:2006+A1:2007 | Identical |
13/30279292 DC : 0 | BS EN 12697-41 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 41: RESISTANCE TO DE-ICING FLUIDS |
13/30278735 DC : 0 | BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
PD CEN/TS 12697-52:2017 | Bituminous mixtures. Test methods Conditioning to address oxidative ageing |
PREN 12697-43 : DRAFT 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 43: RESISTANCE TO FUEL |
UNE-EN 12697-49:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing |
15/30326843 DC : 0 | BS EN 12697-23 - BITUMINOUS MIXTURES - TEST METHODS - PART 23: DETERMINATION OF THE INDIRECT TENSILE STRENGTH OF BITUMINOUS SPECIMENS |
PREN 12697-23 : DRAFT 2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 23: DETERMINATION OF THE INDIRECT TENSILE STRENGTH OF BITUMINOUS SPECIMENS |
PREN 13108-20 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
I.S. EN 12697-49:2014 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
15/30330764 DC : 0 | BS EN 12697-26 - BITUMINOUS MIXTURES - TEST METHODS - PART 26: STIFFNESS |
I.S. EN 12697-23:2017 | BITUMINOUS MIXTURES - TEST METHODS - PART 23: DETERMINATION OF THE INDIRECT TENSILE STRENGTH OF BITUMINOUS SPECIMEN |
BS EN 12697-24:2012 | Bituminous mixtures. Test methods for hot mix asphalt Resistance to fatigue |
PREN 12697-22 : DRAFT 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
EN 12697-24:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue |
DIN EN 12697-24:2016-01 (Draft) | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 24: RESISTANCE TO FATIGUE |
EN 13375:2004 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation |
EN 12697-22:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking |
EN 12697-35:2016 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
EN 12697-41:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids |
EN 12697-49:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing |
EN 12697-43:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel |
CEN/TS 12697-52:2017 | Bituminous mixtures - Test methods - Part 52: Conditioning to address oxidative ageing |
EN 12697-25:2016 | Bituminous mixtures - Test methods - Part 25: Cyclic compression test |
EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
PREN 12697-16 : DRAFT 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 16: ABRASION BY STUDDED TYRES |
ONORM EN 12697-12 : 2008 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 12: DETERMINATION OF THE WATER SENSITIVITY OF BITUMINOUS SPECIMENS |
09/30201986 DC : 0 | BS EN 12697-45 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 45: SATURATION AGEING TENSILE STIFFNESS (SATS) CONDITIONING TEST |
08/30182305 DC : DRAFT JULY 2008 | BS EN 12697-44 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
13/30288543 DC : 0 | BS EN 12697-25 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 25: CYCLIC COMPRESSION TEST |
PREN 12697-35 : DRAFT 2014 | BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
UNE-EN 12697-45:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test |
18/30368690 DC : 0 | BS EN 13108-31 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
PREN 12697-44 : DRAFT 2017 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
I.S. EN 12697-12:2008 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 12: DETERMINATION OF THE WATER SENSITIVITY OF BITUMINOUS SPECIMENS |
BS EN 13375:2004 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Specimen preparation |
EN 12697-23:2017 | Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens |
DIN EN 12697-43:2014-10 | Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel |
DIN EN 12697-22:2013-12 (Draft) | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
DIN EN 12697-41:2014-03 | Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids |
BS EN 12697-41:2013 | Bituminous mixtures. Test methods for hot mix asphalt Resistance to de-icing fluids |
EN 12697-45:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test |
I.S. EN 12697-16:2016 | BITUMINOUS MIXTURES - TEST METHODS - PART 16: ABRASION BY STUDDED TYRES |
DIN EN 13375:2004-12 | FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION |
I.S. EN 12697-41:2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 41: RESISTANCE TO DE-ICING FLUIDS |
I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
DIN EN 12697-46:2012-07 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 46: LOW TEMPERATURE CRACKING AND PROPERTIES BY UNIAXIAL TENSION TESTS |
I.S. EN 12697-43:2014 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 43: RESISTANCE TO FUEL |
I.S. EN 12697-25:2016 | BITUMINOUS MIXTURES - TEST METHODS - PART 25: CYCLIC COMPRESSION TEST |
I.S. EN 12697-35:2016 | BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
UNI EN 12697-43 : 2014 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 43: RESISTANCE TO FUEL |
BS EN 12697-49:2014 | Bituminous mixtures. Test methods for hot mix asphalt Determination of friction after polishing |
ISO/TS 19708:2007 | Geosynthetics Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method |
I.S. EN 12697-46:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 46: LOW TEMPERATURE CRACKING AND PROPERTIES BY UNIAXIAL TENSION TESTS |
UNE-EN 12697-46:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests |
11/30251982 DC : 0 | BS EN 12697-49 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
BS EN 12697-44:2010 | Bituminous mixtures. Test methods for hot mix asphalt Crack propagation by semi-circular bending test |
UNI EN 12697-45 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 45: SATURATION AGEING TENSILE STIFFNESS (SATS) CONDITIONING TEST |
BS EN 12697-12:2008 | Bituminous mixtures. Test methods for hot mix asphalt Determination of the water sensitivity of bituminous specimens |
UNI EN 12697-49 : 2014 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
12/30268992 DC : 0 | BS EN 12697-43 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 43: RESISTANCE TO FUEL |
BS EN 12697-45:2012 | Bituminous mixtures. Test methods for hot mix asphalt Saturation Ageing Tensile Stiffness (SATS) conditioning test |
UNI EN 12697-44 : 2010 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
I.S. EN 13375:2004 | FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION |
PREN 13375 : DRAFT 2017 | FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION |
UNI EN 12697-24 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 24: RESISTANCE TO FATIGUE |
I.S. EN 12697-44:2010 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
UNI EN 12697-46 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 46: LOW TEMPERATURE CRACKING AND PROPERTIES BY UNIAXIAL TENSION |
EN 12697-12:2008 | Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens |
UNI EN 12697-12 : 2008 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 12: DETERMINATION OF THE WATER SENSITIVITY OF BITUMINOUS SPECIMENS |
UNE-EN 12697-24:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue |
UNE-EN 12697-35:2017 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
UNE-EN 12697-16:2017 | Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres |
UNI EN 12697-41 : 2014 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 41: RESISTANCE TO DE-ICING FLUIDS |
DIN EN 12697-44:2010-12 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
BS EN 12697-46:2012 | Bituminous mixtures. Test methods for hot mix asphalt Low temperature cracking and properties by uniaxial tension tests |
15/30330767 DC : 0 | BS EN 12697-24 - BITUMINOUS MIXTURES - TEST METHODS - PART 24: RESISTANCE TO FATIGUE |
DD ISO/TS 19708:2007 | Geosynthetics. Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method |
PD CEN/TS 12697-50:2016 | Bituminous mixtures. Test methods Resistance to scuffing |
PREN 12697-26 : DRAFT 2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 26: STIFFNESS |
PREN 13108-31 : DRAFT 2018 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
13/30289769 DC : 0 | BS EN 12697-48 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 48: INTERLAYER BONDING (TORQUE BOND TEST - TBT, SHEAR BOND TEST - SBT, TENSILE ADHESION TEST (TAT) |
CEN/TS 12697-50:2016 | Bituminous mixtures - Test methods - Part 50: Resistance to scuffing |
17/30360281 DC : 0 | BS EN 13375 - FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION |
ONORM EN 12697-22 : 2007 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
BS EN 12697-16:2004 | Bituminous mixtures. Test methods for hot mix asphalt Abrasion by studded tyres |
UNE-EN 12697-43:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel |
BS EN 12697-35:2004 | Bituminous mixtures. Test methods for hot mix asphalt Laboratory mixing |
EN 12697-46:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests |
UNE-EN 12697-41:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids |
I.S. EN 12697-22:2004 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
BS EN 12697-22:2003 | Bituminous mixtures. Test methods for hot mix asphalt Wheel tracking |
BS EN 12697-43:2014 | Bituminous mixtures. Test methods for hot mix asphalt Resistance to fuel |
BS EN 12697-25:2005 | Bituminous mixtures. Test methods for hot mix asphalt Cyclic compression test |
DIN EN 12697-22:2007-10 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
DIN EN 12697-12:2015-12 (Draft) | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 12: DETERMINATION OF THE WATER SENSITIVITY OF BITUMINOUS SPECIMENS |
PREN 12697-41 : DRAFT 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 41: RESISTANCE TO DE-ICING FLUIDS |
DIN EN 12697-45:2012-07 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 45: SATURATION AGEING TENSILE STIFFNESS (SATS) CONDITIONING TEST |
14/30310361 DC : 0 | BS EN 12697-35 - BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
NF EN 12697-44 : 2010 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
13/30291476 DC : 0 | BS EN 12697-16 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 16: ABRASION BY STUDDED TYRES |
S.R. CEN/TS 12697-50:2016 | BITUMINOUS MIXTURES - TEST METHODS - PART 50: RESISTANCE TO SCUFFING |
I.S. EN 12697-45:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 45: SATURATION AGEING TENSILE STIFFNESS (SATS) CONDITIONING TEST |
I.S. EN 12697-24:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 24: RESISTANCE TO FATIGUE |
I.S. CEN/TS 12697-52:2017 | BITUMINOUS MIXTURES - TEST METHODS - PART 52: CONDITIONING TO ADDRESS OXIDATIVE AGEING |
17/30360938 DC : 0 | BS EN 12697-44 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 44: CRACK PROPAGATION BY SEMI-CIRCULAR BENDING TEST |
13/30288859 DC : 0 | BS EN 12697-22 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING |
EN 12697-44:2010 | Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test |
EN 12697-16:2016 | Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres |
EN 12697-27:2017 | Bituminous mixtures - Test methods - Part 27: Sampling |
EN 12697-35:2016 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.