EN 12697-1 : 2012 COR 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT
03-20-2020
01-12-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Preparatory treatment of laboratory samples of
bituminous mixtures
5 Determination of binder content
6 Drying to constant mass
7 Reporting of results
8 Precision data
Annex A (informative) - Guidance on the determination
of binder content
Annex B (normative) - Use of equipment for the determination
of binder content
Annex C (normative) - Determination of residual mineral matter
in the binder extract by incineration
Annex D (informative) - Guidance on determination of soluble
binder content of mixtures with polymer-modified binders
Bibliography
Specifies test methods for the determination of the soluble binder content of samples of bituminous mixtures.
Committee |
TC 227
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
UNI EN 12697-1 : 2012 | Identical |
PN EN 12697-1 : 2012 | Identical |
NBN EN 12697-1 : 2012 | Identical |
UNE-EN 12697-1:2013 | Identical |
SN EN 12697-1 : 2013 | Identical |
NF EN 12697-1 : 2012 | Identical |
NS EN 12697-1 : 2012 | Identical |
NEN EN 12697-1 : 2012 | Identical |
SN 670401 : 2013 | Identical |
I.S. EN 12697-1:2012 | Identical |
BS EN 12697-1:2012 | Identical |
ONORM EN 12697-1 : 2012 | Identical |
I.S. EN 12967-1:2007 | Identical |
DIN EN 12697-1:2012-09 | Identical |
13/30273898 DC : 0 | BS EN 12594 - BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
I.S. EN 12697-3:2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
BS EN 12697-3 : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
EN 12697-15:2003 | Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity |
EN 12697-2:2015 | Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution |
EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
14/30311115 DC : 0 | BS EN 12697-8 - BITUMINOUS MIXTURES - TEST METHODS - PART 8: DETERMINATION OF VOID CHARACTERISTICS OF BITUMINOUS SPECIMENS |
BS EN 13924-1:2015 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Hard paving grade bitumens |
PREN 13108-8 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
PREN 13108-20 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
UNI EN 13924-2 : 2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
18/30368690 DC : 0 | BS EN 13108-31 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
UNI EN 12697-5 : 2010 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 5: DETERMINATION OF THE MAXIMUM DENSITY |
EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
DIN EN 12697-3:2013-08 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
BS EN 12594:2014 | Bitumen and bituminous binders. Preparation of test samples |
I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
I.S. EN 12591:2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
I.S. EN 13108-6:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
I.S. EN 12594:2014 | BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
DIN EN 12697-39:2012-08 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 39: BINDER CONTENT BY IGNITION |
DIN EN 12591:2009-08 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
I.S. EN 12697-4:2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 4: BITUMEN RECOVERY: FRACTIONATING COLUMN |
02/108026 DC : DRAFT DEC 2002 | EN 12697-39 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 39: BINDER CONTENT BY IGNITION |
DIN EN 13924-2:2014-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
02/103564 DC : DRAFT AUG 2002 | PREN 13108-8 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
13/30278714 DC : 0 | BS EN 13108-8 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
I.S. EN 12274-2:2018 | SLURRY SURFACING - TEST METHODS - PART 2: DETERMINATION OF RESIDUAL BINDER CONTENT INCLUDING PREPARATION OF SAMPLES |
PREN 12697-54 : DRAFT 2018 | BITUMINOUS MIXTURES - TEST METHODS - PART 54: CURING OF SPECIMEN FOR TEST OF MIXTURES WITH BITUMEN EMULSION |
UNE-EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
EN 12594:2014 | Bitumen and bituminous binders - Preparation of test samples |
DIN EN 12594:2015-01 | BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
DIN EN 12697-4:2015-09 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
I.S. EN 12697-15:2003 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 15: DETERMINATION OF THE SEGREGATION SENSITIVITY |
UNI EN 12594 : 2015 | BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
UNI EN 12697-3 : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
UNI EN 12591 : 2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
16/30332905 DC : 0 | BS EN 12274-2 - SLURRY SURFACING - TEST METHODS - PART 2: DETERMINATION OF RESIDUAL BINDER CONTENT INCLUDING PREPARATION OF SAMPLES |
BS EN 13924-2:2014 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Multigrade paving grade bitumens |
DIN EN 12697-5:2010-04 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 5: DETERMINATION OF THE MAXIMUM DENSITY |
PD CEN/TS 12697-50:2016 | Bituminous mixtures. Test methods Resistance to scuffing |
BS EN 12697-2:2015 | Bituminous mixtures. Test methods Determination of particle size distribution |
NF EN 12697-5 : 2010 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 5: DETERMINATION OF THE MAXIMUM DENSITY |
02/102503 DC : 0 | PREN 12697-45 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 45: BINDER DRAINAGE - SCHELLENBERG METHOD |
BS EN 12697-5:2009 | Bituminous mixtures. Test methods for hot mix asphalt Determination of the maximum density |
BS EN 12697-8:2003 | Bituminous mixtures. Test methods for hot mix asphalt Determination of void characteristics of bituminous specimens |
I.S. EN 12697-2:2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
17/30360929 DC : 0 | BS EN 12697-8 - BITUMINOUS MIXTURES - TEST METHODS - PART 8: DETERMINATION OF VOID CHARACTERISTICS OF BITUMINOUS SPECIMENS |
CEN/TS 12697-50:2016 | Bituminous mixtures - Test methods - Part 50: Resistance to scuffing |
EN 12274-2:2018 | Slurry surfacing - Test methods - Part 2: Determination of residual binder content including preparation of samples |
EN 12697-8:2003 | Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens |
BS EN 12697-15:2003 | Bituminous mixtures. Test methods for hot mix asphalt Determination of the segregation sensitivity |
UNE-EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
I.S. EN 12697-14:2001 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 14: WATER CONTENT |
I.S. EN 12697-39:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 39: BINDER CONTENT BY IGNITION |
UNE-EN 12594:2015 | Bitumen and bituminous binders - Preparation of test samples |
UNE-EN 12697-2:2015 | Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution |
BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
BS EN 12697-4:2005 | Bituminous mixtures. Test methods for hot mix asphalt Bitumen recovery. Fractionating column |
BS EN 13108-8:2016 | Bituminous mixtures. Material specifications Reclaimed asphalt |
UNE-EN 12697-39:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition |
UNI EN 12697-39 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 39: BINDER CONTENT BY IGNITION |
BS EN 12697-39:2012 | Bituminous mixtures. Test methods for hot mix asphalt Binder content by ignition |
IP 461 : 2007 | BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
13/30278735 DC : 0 | BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
I.S. EN 13108-8:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
I.S. EN 13924:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
I.S. EN 13924-2:2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
11/30247867 DC : 0 | BS EN 13924-2 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL BITUMEN - PART 2: MULTIGRADE BITUMENOUS BINDERS |
DIN EN 13924-1:2016-02 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
DIN EN 12697-2:2015-07 | BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
13/30255316 DC : 0 | BS EN 13924-1 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
S.R. CEN/TS 12697-50:2016 | BITUMINOUS MIXTURES - TEST METHODS - PART 50: RESISTANCE TO SCUFFING |
PREN 12697-8 : DRAFT 2017 | BITUMINOUS MIXTURES - TEST METHODS - PART 8: DETERMINATION OF VOID CHARACTERISTICS OF BITUMINOUS SPECIMENS |
PREN 12274-2 : DRAFT 2016 | SLURRY SURFACING - TEST METHODS - PART 2: DETERMINATION OF RESIDUAL BINDER CONTENT INCLUDING PREPARATION OF SAMPLES |
PREN 12591 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
I.S. EN 12697-5:2009 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 5: DETERMINATION OF THE MAXIMUM DENSITY |
18/30368681 DC : 0 | BS EN 12697-54 - BITUMINOUS MIXTURES - TEST METHODS - PART 54 - CURING OF SPECIMEN FOR TEST OF MIXTURES WITH BITUMEN EMULSION |
I.S. EN 13924-1:2015 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
PREN 13108-31 : DRAFT 2018 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
PREN 12594 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - PREPARATION OF TEST SAMPLES |
I.S. EN 12697-8:2003 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 8: DETERMINATION OF VOID CHARACTERISTICS OF BITUMINOUS SPECIMENS |
BS EN 13108-6:2016 | Bituminous mixtures. Material specifications Mastic Asphalt |
EN 12697-39:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition |
BS EN 13924:2006 | Bitumen and bituminous binders. Specifications for hard paving grade bitumens |
EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
DIN EN 13924:2006-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
EN 12592:2014 | Bitumen and bituminous binders - Determination of solubility |
ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
ISO 3310-2:2013 | Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate |
EN 12697-28:2000 | Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading |
EN 12697-39:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition |
EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.