EN 1263-1:2014
Current
The latest, up-to-date edition.
Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods
12-17-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Symbols and terms and definitions
4 Classification
5 Designation
6 Requirements
7 Test methods
8 Marking and labelling
9 Handling instructions
10 Conformity
Annex A (informative) - Prototype assessment
Annex B (informative) - On-going production inspection
Bibliography
This European Standard applies to safety nets and their accessories for use in construction and assembly work to protect from deeper fall. It specifies safety requirements and test methods and is based on the performance characteristics of polypropene and polyamide fibres. Materials used in nets should have no significant reduction in mechanical properties between –10 °C and +40 °C.This European Standard is not applicable to the installation of safety nets. For a European Standard covering the installation of safety nets, see EN 1263 2.
| Committee |
CEN/TC 53
|
| DevelopmentNote |
Supersedes PREN 1263-1. (12/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN 1263-1 : 2014 | Identical |
| NF EN 1263-1 : 2015 | Identical |
| DIN EN 1263-1:2015-03 | Identical |
| NS EN 1263-1 : 2014 | Identical |
| PN EN 1263-1 : 2015 | Identical |
| NBN EN 1263-1 : 2015 | Identical |
| BS EN 1263-1:2014 | Identical |
| SN EN 1263-1 : 2014 | Identical |
| UNI EN 1263-1 : 2003 | Identical |
| UNE-EN 1263-1:2004 | Identical |
| I.S. EN 1263-1:2014 | Identical |
| UNE-EN 1263-1:2014 | Identical |
| UNE-EN 1263-1:2018 | Identical |
| DIN EN 16704-2-2:2014-07 (Draft) | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS |
| PREN 1263-2 : DRAFT 2012 | SAFETY NETS - PART 2: SAFETY REQUIREMENTS FOR THE POSITIONING LIMITS |
| 04/30126149 DC : 0 | EN 528 - RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY |
| I.S. EN 16704-2-2:2016 | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS |
| BS EN 528:2008 | Rail dependent storage and retrieval equipment. Safety requirements |
| EN 528:2008 | Rail dependent storage and retrieval equipment - Safety requirements |
| 14/30285802 DC : 0 | BS EN 16704-2-2 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS |
| DIN 4420-1:2004-03 | Service and working scaffolds - Part 1: Service scaffolds - Performance requirements, general design, structural design |
| EN 1263-2:2014 | Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits |
| I.S. EN 1263-2:2014 | TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 2: SAFETY REQUIREMENTS FOR THE POSITIONING LIMITS |
| DIN EN 13374:2013-07 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| I.S. EN 528:2008 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 16704-2-2:2016 | Railway applications. Track. Safety protection on the track during work Common solutions and technology. Requirements for barriers |
| UNE-EN 16704-2-2:2017 | Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers |
| UNE-EN 13374:2013 | Temporary edge protection systems - Product specification - Test methods |
| DIN EN 1263-2:2015-03 | TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 2: SAFETY REQUIREMENTS FOR THE POSITIONING LIMITS |
| UNE-EN 1263-2:2016 | Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits |
| EN 16704-2-2:2016 | Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers |
| UNI EN 13374 : 2013 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| I.S. EN 13374:2013 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| 11/30250535 DC : DRAFT DEC 2011 | BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| 12/30272388 DC : 0 | BS EN 1263-2 - SAFETY NETS - PART 2: SAFETY REQUIREMENTS FOR THE POSITIONING LIMITS |
| EN 13374:2013 | Temporary edge protection systems - Product specification - Test methods |
| DIN EN 528:2009-02 | Rail dependent storage and retrieval equipment - Safety requirements |
| BS EN 1263-2:2014 | Temporary works equipment. Safety nets Safety requirements for the positioning limits |
| BS EN 13374 : 2013 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| UNI EN 528 : 2009 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| DIN EN 16704-2-2:2017-03 | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN ISO 1806:2002 | Fishing nets - Determination of mesh breaking force of netting (ISO 1806:2002) |
| EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| EN ISO 2307:2010 | Fibre ropes - Determination of certain physical and mechanical properties (ISO 2307:2010) |
| ISO 1806:2002 | Fishing nets — Determination of mesh breaking force of netting |
| EN 1263-2:2014 | Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 2307:2010 | Fibre ropes Determination of certain physical and mechanical properties |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.