EN 12464-1:2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Light and lighting - Lighting of work places - Part 1: Indoor work places
Superseded date
09-03-2021
Superseded by
Published date
06-01-2011
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Lighting design criteria
5 Schedule of lighting requirements
6 Verification procedures
Annex A (informative) - Typical values of grid point
spacing
Annex B (informative) - A-deviation
Bibliography
Index of interior areas, tasks and activities
This European Standard specifies lighting requirements for humans in indoor work places, which meet the needs for visual comfort and performance of people having normal ophthalmic (visual) capacity. All usual visual tasks are considered, including Display Screen Equipment (DSE).This European Standard specifies requirements for lighting solutions for most indoor work places and their associated areas in terms of quantity and quality of illumination. In addition recommendations are given for good lighting practice.This European Standard does not specify lighting requirements with respect to the safety and health of people at work and has not been prepared in the field of application of Article 137 of the EC treaty, although the lighting requirements, as specified in this European Standard, usually fulfil safety needs. Lighting requirements with respect to the safety and health of workers at work can be contained in Directives based on Article 137 of the EC treaty, in national legislation of member states implementing these directives or in other national legislation of member states.This European Standard neither provides specific solutions, nor restricts the designers´ freedom from exploring new techniques nor restricts the use of innovative equipment. The illumination can be provided by daylight, artificial lighting or a combination of both.This European Standard is not applicable for the lighting of outdoor work places and underground mining or emergency lighting. For outdoor work places, see EN 12464-2 and for emergency lighting, see EN 1838 and EN 13032-3.
| Committee |
CEN/TC 169
|
| DevelopmentNote |
Supersedes PREN 12464-1. (08/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NS-EN 12464-1:2021 | Identical |
| PN EN 12464-1 : 2012 | Identical |
| NBN EN 12464-1 : 2011 | Identical |
| I.S. EN 12464-1:2011 | Identical |
| UNE-EN 12464-1:2012 | Identical |
| SN EN 12464-1 : 2011 | Identical |
| NF EN 12464-1 : 2011 | Identical |
| NEN EN 12464-1 : 2011 | Identical |
| BS EN 12464-1:2011 | Identical |
| NS EN 12464-1 : 2011 | Identical |
| UNI EN 12464-1 : 2011 | Identical |
| ONORM EN 12464-1 : 2011 | Identical |
| DIN EN 12464-1:2011-08 | Identical |
| BS ISO 35101:2017 | Petroleum and natural gas industries. Arctic operations. Working environment |
| IEC TS 61496-4-2:2014 | Safety of machinery - Electro-sensitive protective equipment - Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using reference pattern techniques (VBPDPP) |
| BS EN 15643-3:2012 | Sustainability of construction works. Assessment of buildings Framework for the assessment of social performance |
| 17/30331258 DC : 0 | BS EN 12193 - LIGHT AND LIGHTING - SPORTS LIGHTING |
| PD CEN/TR 15193-2:2017 | Energy performance of buildings. Energy requirements for lighting Explanation and justification of EN 15193-1, Module M9 |
| 13/30284424 DC : 0 | BS EN 4726 - AEROSPACE SERIES - ACCEPTANCE OF THE COSMETIC VARIATIONS IN APPEARANCE OF AIRCRAFT CABIN PARTS |
| PD ISO/TR 20278:2015 | Unwanted reflections from the active and inactive areas of display surfaces visible during use |
| I.S. EN 13779:2007 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| BS EN 15288-1 : 2008 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| DIN EN 15643-1:2010-12 | Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework |
| BS EN 15093:2008 | Safety of machinery. Safety requirements for hot flat rolling mills |
| 09/30180290 DC : 0 | BS EN 1247:2004/A1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| 09/30179779 DC : 0 | BS EN 13457 AMD1 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 15643-4:2012-04 | Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance |
| EN 15643-3:2012 | Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance |
| CEN ISO/TR 52000-2:2017 | Energy performance of buildings - Overarching EPB assessment - Part 2: Explanation and justification of ISO 52000-1 (ISO/TR 52000-2:2017) |
| I.S. EN 15193-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING - PART 1: SPECIFICATIONS, MODULE M9 |
| I.S. EN 16844:2017+A2:2019 | Aesthetic medicine services - Non-surgical medical treatments |
| I.S. EN 14753:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL |
| ISO/TR 52000-2:2017 | Energy performance of buildings Overarching EPB assessment Part 2: Explanation and justification of ISO 52000-1 |
| ISO 35101:2017 | Petroleum and natural gas industries — Arctic operations — Working environment |
| 17/30360253 DC : 0 | BS EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| I.S. EN 16282-2:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS |
| I.S. EN 4726:2015 | AEROSPACE SERIES - ACCEPTANCE OF THE COSMETIC VARIATIONS IN APPEARANCE OF AIRCRAFT CABIN PARTS |
| BS EN 4726:2015 | Aerospace series. Acceptance of the cosmetic variations in appearance of aircraft cabin parts |
| ISO 23045:2008 | Building environment design — Guidelines to assess energy efficiency of new buildings |
| I.S. EN 15061:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| DIN EN 12665:2016-09 (Draft) | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| DIN EN 13675:2010-10 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010) |
| BS EN 12203 : 2003 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| BS EN 13457 : 2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| ISO 6385:2016 | Ergonomics principles in the design of work systems |
| BS EN 1837 : 1999 | SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES |
| BS EN 15193:2007 | Energy performance of buildings. Energy requirements for lighting |
| BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| BS EN 12110:2014 | Tunnelling machines. Air locks. Safety requirements |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| BS EN 12387 : 2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
| EN 12203:2003+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
| EN 13032-3:2007 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places |
| EN ISO 9680:2014 | Dentistry - Operating lights (ISO 9680:2014) |
| EN 12215:2004+A1:2009 | Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
| EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
| CEN/TS 16920:2016 | Environmental influence testing methodology for operational deployments of European ABC systems |
| CEN/TS 16163:2014 | Conservation of Cultural Heritage - Guidelines and procedures for choosing appropriate lighting for indoor exhibitions |
| EN 13457:2004+A1:2010 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements |
| I.S. EN 13032-3:2007 | MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 3: PRESENTATION OF DATA FOR EMERGENCY LIGHTING OF WORK PLACES |
| VDI 6011 Blatt 2:2006-04 | Optimization of daylighting and artificial lighting - Rooflights |
| CEN/TR 16798-4:2017 | Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| UNI EN 16309 : 2014-10 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| DIN EN 16309:2014-12 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| 16/30339514 DC : 0 | BS EN 17003 - ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| 11/30244198 DC : 0 | BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS |
| UNI EN 15643-4 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
| DIN EN 15251:2012-12 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| I.S. EN 15193:2007 | ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING |
| 10/30219687 DC : 0 | BS EN 15643-4 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
| PD CEN/TS 16163:2014 | Conservation of Cultural Heritage. Guidelines and procedures for choosing appropriate lighting for indoor exhibitions |
| DIN EN 15643-3:2012-04 | Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance |
| BS EN ISO 9241-307:2008 | Ergonomics of human-system interaction Analysis and compliance test methods for electronic visual displays |
| PD CEN/TR 16798-4:2017 | Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-3. For non-residential buildings. Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| DIN EN 15288-1:2010-12 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| DIN EN 15093:2009-06 | Safety of machinery - Safety requirements for hot flat rolling mills |
| DIN EN 15949:2012-05 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| BS EN 16309 : 2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| UNI EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| 11/30244195 DC : 0 | BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS |
| 15/30263791 DC : 0 | BS ISO 17772-1 - ENERGY PERFORMANCE OF BUILDINGS - INDOOR ENVIRONMENTAL QUALITY - PART 1: INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR THE DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS |
| PREN 12464-2 : DRAFT 2013 | LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 2: OUTDOOR WORK PLACES |
| 04/102838 DC : DRAFT JAN 2004 | EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| 14/30292857 DC : 0 | BS EN 15193-1 - ENERGY PERFORMANCE OF BUILDINGS - MODULE M9 - ENERGY REQUIREMENTS FOR LIGHTING - PART 1: SPECIFICATIONS |
| I.S. EN 16844:2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| I.S. EN ISO 9241-307:2008 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 307: ANALYSIS AND COMPLIANCE TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS |
| 10/30216730 DC : 0 | BS EN 15643-3 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
| UNI CEN/TS 16163 : 2014 | CONSERVATION OF CULTURAL HERITAGE - GUIDELINES AND PROCEDURES FOR CHOOSING APPROPRIATE LIGHTING FOR INDOOR EXHIBITIONS |
| I.S. EN 15093:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| S.R. CEN/TR 15193-2:2017 | ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING PART 2: EXPLANATION AND JUSTIFICATION OF EN 15193-1, MODULE M9 |
| EN 15643-2:2011 | Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance |
| ISO/TR 20278:2015 | Unwanted reflections from the active and inactive areas of display surfaces visible during use |
| EN 15643-4:2012 | Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance |
| EN 15643-1:2010 | Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework |
| UNI EN 15643-2 : 2011 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
| BS EN 15061 : 2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| S.R. CEN/TS 16920:2016 | ENVIRONMENTAL INFLUENCE TESTING METHODOLOGY FOR OPERATIONAL DEPLOYMENTS OF EUROPEAN ABC SYSTEMS |
| I.S. EN 12665:2011 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| I.S. EN 16309:2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| UNI EN 15949 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| UNE-EN 15288-1:2009 | Swimming pools - Part 1: Safety requirements for design |
| I.S. EN 15251:2007 | INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS |
| PREN 17037 : DRAFT 2016 | DAYLIGHT OF BUILDINGS |
| EN 4726:2015 | Aerospace series - Acceptance of the cosmetic variations in appearance of aircraft cabin parts |
| DIN EN 1837:2009-12 | Safety of machinery - Integral lighting of machines (includes Amendment A1:2009) |
| DIN EN 12215:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 12387:2010-03 | Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009) |
| DIN EN 12203:2010-07 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009 |
| DIN EN 14681:2010-10 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010) |
| DIN EN 12464-2:2014-05 | LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 2: OUTDOOR WORK PLACES |
| DIN EN 12110:2014-10 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| BS EN ISO 11111-1:2016 | Textile machinery. Safety requirements Common requirements |
| BS EN 13032-3:2007 | Measurement and presentation of photometric data of lamps and luminaires Presentation of data for emergency lighting of work places |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| DIN EN ISO 9680:2015-02 | Dentistry - Operating lights (ISO 9680:2014) |
| I.S. EN 12215:2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN ISO 6385:2016 | ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS |
| I.S. EN 12203:2003 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| I.S. EN 13042-5:2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES |
| I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| I.S. EN ISO 11111-1:2016 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016) |
| I.S. EN 14681:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| I.S. EN 1837:1999 | SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES |
| I.S. EN ISO 9680:2014 | DENTISTRY - OPERATING LIGHTS (ISO 9680:2014) |
| I.S. EN 12464-2:2014 | LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 2: OUTDOOR WORK PLACES |
| I.S. EN 617:2001 | |
| I.S. EN 13675:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| I.S. EN 1247:2004 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| I.S. EN 12110:2014 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| DIN EN 13032-3:2007-12 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places |
| I.S. EN 12387:2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
| DIN EN 1845:2008-06 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
| I.S. EN 1845:2007 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 1837 : 2009 | SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES |
| DIN EN 12193:2008-04 | LIGHT AND LIGHTING - SPORTS LIGHTING |
| I.S. EN 13457:2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12387 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
| IES HB 10 : 2011 | THE LIGHTING HANDBOOK |
| VDI 3414 Blatt 2:2014-02 (Draft) | Quality evaluation of wooden surfaces - Testing and measuring methods |
| VDI 2166 Blatt 2:2015-10 | Planning of electrical installations in buildings - Advice for electric mobility |
| VDI 2050 Blatt 5:2010-10 | Requirements at technical equipment rooms - Electrical engineering |
| VDI 6011 Blatt 1:2016-07 | Lighting technology - Optimisation of daylight use and artificial lighting - Fundamentals and basic requirements |
| VDI 2199:2012-01 | Recommendations for structure planning in the field of operating with industrial trucks |
| VDI 2089 Blatt 3:2011-09 | Building installations in swimming baths - Open-air pools |
| ONORM EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| VDI 2089 Blatt 2:2009-08 | Building services in swimming baths - Efficient use of energy and water |
| VDI 3414 Blatt 1:2014-02 (Draft) | Quality evaluation of wooden surfaces - Surface characteristics |
| VDI 2089 Blatt 1:2010-01 | Building Services in swimming baths - Indoor pools |
| DIN EN 15193-1:2017-10 | Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9 |
| BS EN 12193:2007 | Light and lighting. Sports lighting |
| PD ISO/TR 22100-3:2016 | Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards |
| BS EN 15643-4:2012 | Sustainability of construction works. Assessment of buildings Framework for the assessment of economic performance |
| 09/30192729 DC : DRAFT FEB 2009 | BS EN 15643-2 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
| 15/30317874 DC : 0 | BS EN 16844 - AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| 09/30175678 DC : 0 | BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| DIN EN 14677:2008-11 | SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| DIN EN 15061:2009-05 | Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008) |
| 17/30334840 DC | BS ISO 20086. Light and lighting. Energy performance of lighting in buildings |
| 10/30234293 DC : 0 | BS EN 12110 - TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| 16/30333945 DC : 0 | BS EN 15643-5 - SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
| 13/30245306 DC : 0 | BS EN ISO 9680 - DENTISTRY - OPERATING LIGHTS |
| BS EN 14753:2007 | Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel |
| UNI EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| 10/30219681 DC : 0 | BS EN 15643-3 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
| I.S. EN 15949:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| DIN EN 15094:2009-04 | Safety of machinery - Safety requirements for cold flat rolling mills |
| S.R. CEN/TS 16163:2014 | CONSERVATION OF CULTURAL HERITAGE - GUIDELINES AND PROCEDURES FOR CHOOSING APPROPRIATE LIGHTING FOR INDOOR EXHIBITIONS |
| PD IEC/TS 61496-4-2:2014 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using reference pattern techniques (VBPDPP) |
| BS EN 15094:2008 | Safety of machinery. Safety requirements for cold flat rolling mills |
| BS ISO 17772-1:2017 | Energy performance of buildings. Indoor environmental quality Indoor environmental input parameters for the design and assessment of energy performance of buildings |
| UNI EN 14753 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
| 11/30247574 DC : 0 | BS EN 16309 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - METHODS |
| 15/30297473 DC : 0 | BS EN 16798-1 - ENERGY PERFORMANCE OF BUILDINGS - PART 1: INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS - MODULE M1-6 |
| 09/30192733 DC : DRAFT FEB 2009 | BS EN 15643-1 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
| PD CEN/TS 16920:2016 | Environmental influence testing methodology for operational deployments of European ABC systems |
| UNE-EN 12464-2:2016 | Light and lighting - Lighting of work places - Part 2: Outdoor work places |
| EN 15193-1:2017 | Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9 |
| DIN EN 14753:2008-03 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
| I.S. EN 15288-1:2008 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| I.S. EN 13032-2:2017 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES |
| ISO/TR 22100-3:2016 | Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards |
| EN 12193:2007 | Light and lighting - Sports lighting |
| CEN/TR 15193-2:2017 | Energy performance of buildings - Energy requirements for lighting - Part 2: Explanation and justification of EN 15193-1, Module M9 |
| UNI EN 15643-3 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
| I.S. EN 16282-3:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS |
| EN 16844:2017 | Aesthetic medicine services - Non-surgical medical treatments |
| UNI EN 12665 : 2011 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| DIN EN 1247:2010-12 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines (includes Amendment A1:2010) |
| DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
| NF EN 1837 : 1999 + A1 2009 | SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES |
| DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| DIN EN 692:2009-10 | Machine tools - Mechanical presses - Safety (includes Amendment A1:2009) |
| BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| EN 15288-1:2008+A1:2010 | Swimming pools - Part 1: Safety requirements for design |
| UNI EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| UNI EN 12203 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| UNI EN ISO 9241-307 : 2009 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 307: ANALYSIS AND COMPLIANCE TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS |
| UNI EN 692 : 2009 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| EN 617:2001+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
| UNI EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| UNI EN 617 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
| UNI EN 1845 : 2008 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 13457 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 13861 : 2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| UNI EN 1247 : 2010 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| UNI EN 12464-2 : 2014 | LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 2: OUTDOOR WORK PLACES |
| UNI EN 13042-5 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES |
| UNI EN 13779 : 2008 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| UNI EN 12110 : 2014 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| BS EN 1247 : 2004 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| UNI EN 12215 : 2010 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| UNI EN 13675 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| UNI EN 14681 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| S.R. CEN ISO/TR 52000-2:2017 | ENERGY PERFORMANCE OF BUILDINGS - OVERARCHING EPB ASSESSMENT - PART 2: EXPLANATION AND JUSTIFICATION OF ISO 52000-1 (ISO/TR 52000-2:2017) |
| BS EN 15643-2:2011 | Sustainability of construction works. Assessment of buildings Framework for the assessment of environmental performance |
| 14/30303747 DC : 0 | BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS |
| BS EN 15949:2012 | Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
| 13/30281363 DC : 0 | BS EN 12464-2 - LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 2: OUTDOOR WORK PLACES |
| UNI EN 15288-1 : 2010 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| 14/30302903 DC : 0 | BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
| I.S. EN 692:2005 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| BS EN 14677:2008 | Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel |
| PREN 16282-3 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS |
| BS EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| I.S. EN 16774:2016 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
| BS EN 16282-3:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements |
| 16/30345783 DC : 0 | BS EN 13032-2 - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES |
| ISO 17772-1:2017 | Energy performance of buildings — Indoor environmental quality — Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings |
| 09/30201995 DC : 0 | BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| 06/30124376 DC : DRAFT SEP 2006 | EN 15193 - ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING |
| 14/30304361 DC : 0 | BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS |
| PD IEC/TS 61496-4-3:2015 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using stereo vision techniques (VBPDST) |
| PD CEN ISO/TR 52000-2:2017 | Energy performance of buildings. Overarching EPB assessment Explanation and justification of ISO 52000-1 |
| DIN EN ISO 9241-307:2009-06 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 307: ANALYSIS AND COMPLIANCE TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS |
| DIN EN 15643-2:2011-05 | Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance |
| BS EN 16774:2016 | Safety of machinery. Safety requirements for steel converter and associated equipment |
| PREN 13032-2 : DRAFT 2016 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES |
| I.S. EN 15094:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| 16/30342285 DC : 0 | BS EN 17037 - DAYLIGHT OF BUILDINGS |
| PREN 17003 : DRAFT 2016 | ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| 17/30364338 DC : 0 | BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
| PREN 12193 : DRAFT 2017 | LIGHT AND LIGHTING - SPORTS LIGHTING |
| EN 13032-2:2017 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places |
| I.S. EN 12193:2007 | LIGHT AND LIGHTING - SPORTS LIGHTING |
| DIN EN 617:2011-06 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (includes Amendment A1:2010) |
| BS EN 13675 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| BS EN ISO 9680:2014 | Dentistry. Operating lights |
| ISO 9241-307:2008 | Ergonomics of human-system interaction — Part 307: Analysis and compliance test methods for electronic visual displays |
| UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
| UNE-EN 12665:2012 | Light and lighting - Basic terms and criteria for specifying lighting requirements |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| BS EN 12665:2011 | Light and lighting. Basic terms and criteria for specifying lighting requirements |
| ISO 11111-1:2016 | Textile machinery Safety requirements Part 1: Common requirements |
| 05/30128995 DC : 0 | PREN 15251 - CRITERIA FOR THE INDOOR ENVIRONMENT INCULDING THERMAL, INDOOR AIR QUALITY, LIGHT AND NOISE |
| UNE-EN 617:2002 | Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers. |
| UNE EN 16309 : 0 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| BS EN 12464-2:2014 | Light and lighting. Lighting of work places Outdoor work places |
| BS EN 13042-5 : 2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES |
| UNE-EN 1247:2005 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines |
| BS EN 13779:2007 | Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems |
| UNE-EN ISO 11111-1:2016 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
| ISO 9680:2014 | Dentistry Operating lights |
| 16/30282349 DC : 0 | BS ISO 35101 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OPERATIONS - WORKING ENVIRONMENT |
| DIN EN 13042-5:2009-12 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses (includes Amendment A1:2009) |
| EN 16774:2016 | Safety of machinery - Safety requirements for steel converter and associated equipment |
| EN 692:2005+A1:2009 | Machine tools - Mechanical presses - Safety |
| EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
| EN ISO 11111-1:2016 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills |
| EN ISO 9241-307:2008 | Ergonomics of human-system interaction - Part 307: Analysis and compliance test methods for electronic visual displays (ISO 9241-307:2008) |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment |
| UNI EN ISO 9680 : 2015 | DENTISTRY - OPERATING LIGHTS |
| EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| EN 16309:2014+A1:2014 | Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology |
| EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills |
| EN 14681:2006+A1:2010 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
| EN 1845:2007 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
| EN 14753:2007 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
| EN 13042-5:2003+A1:2009 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses |
| EN 14677:2008 | Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
| EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| EN ISO 6385:2016 | Ergonomics principles in the design of work systems (ISO 6385:2016) |
| I.S. EN 15643-4:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE |
| 05/30128661 DC : 0 | EN 13779 - VENTILATION FOR NON RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| BS EN 15643-1:2010 | Sustainability of construction works. Sustainability assessment of buildings General framework |
| 17/30355716 DC : 0 | BS EN 63008 ED.1.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - ACCESSIBILITY OF CONTROL ELEMENTS, DOORS, LIDS, DRAWERS AND HANDLES |
| PD IEC/TS 62835:2015 | Electric toasters for household and similar use. Methods and measurements for improving accessibility |
| DIN CEN/TS 16920;DIN SPEC 16594:2016-08 | ENVIRONMENTAL INFLUENCE TESTING METHODOLOGY FOR OPERATIONAL DEPLOYMENTS OF EUROPEAN ABC SYSTEMS |
| I.S. EN 15643-3:2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE |
| 09/30180832 DC : DRAFT AUG 2009 | BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT |
| 14/30297790 DC : 0 | BS EN ISO 6385 - ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS |
| PD CEN/TS 17108:2017 | Non-destructive testing. Lighting in penetrant and magnetic particle testing, good practice |
| 14/30303744 DC : 0 | BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS |
| 13/30287708 DC : 0 | PD IEC/TS 62853 ED.1.0 - ELECTRIC TOASTERS FOR HOUSEHOLD AND SIMILAR USE - METHODS AND MEASUREMENTS FOR IMPROVING ACCESSIBILITY |
| BS EN 15193-1:2017 | Energy performance of buildings. Energy requirements for lighting Specifications, Module M9 |
| 12/30237838 DC : 0 | BS ISO 16343 - ENERGY PERFORMANCE OF BUILDINGS - METHODS FOR EXPRESSING ENERGY PERFORMANCE AND FOR ENERGY CERTIFICATION OF BUILDINGS |
| BS EN 16282-2:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements |
| I.S. EN 15643-1:2010 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
| 09/30181772 DC : 0 | BS EN 1837:1999/A1 - SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES |
| PREN 16282-2 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS |
| UNI EN 15643-1 : 2010 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK |
| PREN 4726 : DRAFT 2017 | AEROSPACE SERIES - ACCEPTANCE PARAMETERS OF AESTHETICAL VARIATIONS FOR ALL VISIBLE EQUIPMENT INSTALLED IN AIRCRAFT CABINS UNDER ALL CONTRACTUAL VARIATIONS |
| PREN 15643-5 : DRAFT 2016 | SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS |
| S.R. CEN/TR 16798-4:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 4: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-3 - FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| I.S. EN 15643-2:2011 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE |
| I.S. EN 14677:2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| S.R. CEN/TR 17108:2017 | NON-DESTRUCTIVE TESTING - LIGHTING IN PENETRANT AND MAGNETIC PARTICLE TESTING, GOOD PRACTICE |
| BS EN 16844 : 2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL TREATMENTS |
| IEC TS 61496-4-3:2015 | Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using stereo vision techniques (VBPDST) |
| DIN EN 13457:2010-10 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements; German version EN 13457:2004+A1:2010 |
| BS EN 1845:2007 | Footwear manufacturing machines. Footwear moulding machines. Safety requirements |
| BS EN 692 : 2005 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
| BS EN 617 : 2001 | |
| BS EN ISO 6385:2016 | Ergonomics principles in the design of work systems |
| BS EN 14681 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| EN 12387:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements |
| EN 1247:2004+A1:2010 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
| CEN/TR 17108:2017 | Non-destructive testing - Lighting in penetrant and magnetic particle testing, good practice |
| DIN EN 13779:2007-09 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| EN 12464-2:2014 | Light and lighting - Lighting of work places - Part 2: Outdoor work places |
| DIN EN 12110:2003-05 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| EN 12110:2014 | Tunnelling machines - Air locks - Safety requirements |
| DIN EN 15193:2008-01 | ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING |
| UNE-EN 12203:2004 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
| ISO 9680:2014 | Dentistry Operating lights |
| ISO 9241-307:2008 | Ergonomics of human-system interaction — Part 307: Analysis and compliance test methods for electronic visual displays |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| EN ISO 9241-302:2008 | Ergonomics of human-system interaction - Part 302: Terminology for electronic visual displays (ISO 9241-302:2008) |
| AS 4285:2019 | Rooflights |
| EN 12193:2007 | Light and lighting - Sports lighting |
| EN ISO 6385:2016 | Ergonomics principles in the design of work systems (ISO 6385:2016) |
| EN 12464-2:2014 | Light and lighting - Lighting of work places - Part 2: Outdoor work places |
| EN ISO 9241-307:2008 | Ergonomics of human-system interaction - Part 307: Analysis and compliance test methods for electronic visual displays (ISO 9241-307:2008) |
| EN 13032-1:2004+A1:2012 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| ISO 15469:2004 | Spatial distribution of daylight — CIE standard general sky |
| ISO 6385:2016 | Ergonomics principles in the design of work systems |
| ISO 8995-1:2002 | Lighting of work places Part 1: Indoor |
| EN 1838:2013 | Lighting applications - Emergency lighting |
| EN ISO 9680:2014 | Dentistry - Operating lights (ISO 9680:2014) |
| ISO 9241-302:2008 | Ergonomics of human-system interaction — Part 302: Terminology for electronic visual displays |
| EN 13032-3:2007 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.