EN 12451:2012
Current
Current
The latest, up-to-date edition.
Copper and copper alloys - Seamless, round tubes for heat exchangers
Published date
05-16-2012
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection
documentation
10 Marking, packaging, labelling
Annex A (normative) - U-bend seamless copper
and copper alloy heat exchanger tubes
Annex ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Pressure Equipment Directive (PED) 97/23/EC
Bibliography
This European Standard specifies the composition, property requirements and tolerances on dimensions and form for seamless round drawn copper and copper alloy tubes for heat exchangers, condensers, evaporators and desalination equipment. It gives guidelines for copper and copper alloy tubes supplied in the size range from 6 mm up to and including 76 mm outside diameter and from 0,5 mm up to and including 3 mm wall thickness.The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.
| Committee |
CEN/TC 133
|
| DevelopmentNote |
Supersedes PREN 12451. (06/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 12451 : 2012 | Identical |
| UNI EN 12451 : 2012 | Identical |
| UNE-EN 12451:2013 | Identical |
| SN EN 12451 : 2012 | Identical |
| NF EN 12451 : 2012 | Identical |
| NBN EN 12451 : 2012 | Identical |
| BS EN 12451:2012 | Identical |
| NS EN 12451 : 2012 | Identical |
| PN EN 12451 : 2012 | Identical |
| I.S. EN 12451:2012 | Identical |
| DIN EN 12451:2012-08 | Identical |
| CEI EN 50216-9 : 2010 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS |
| 10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
| BS EN 50216-10:2009 | Power transformer and reactor fittings Oil-to-air heat exchangers |
| DD CEN/TS 13388:2008 | Copper and copper alloys. Compendium of compositions and products |
| BS EN ISO 15138:2007 | Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning |
| UNI EN ISO 15138 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| PD CEN/TS 13388:2015 | Copper and copper alloys. Compendium of compositions and products |
| DIN SPEC 9700 E : 2013 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| BS EN 12861:1999 | Copper and copper alloys. Scrap |
| I.S. EN 14276-1:2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| DIN CEN/TS 13388;DIN SPEC 9700:2013-05 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| 17/30351224 DC : 0 | BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| I.S. EN 50216-9:2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS |
| API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| S.R. CEN/TS 13388:2015 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| I.S. EN 50216-10:2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
| I.S. EN ISO 15138:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| DIN EN 14276-1:2011-05 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| EN 14276-1:2020 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| UNI EN 14276-1 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| BS EN 50216-9:2009 | Power transformer and reactor fittings Oil-to-water heat exchangers |
| 06/30127203 DC : DRAFT OCT 2006 | ISO 15138 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR CONDITIONING |
| 04/30123986 DC : DRAFT OCT 2004 | EN 50216-9 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL TO WATER HEAT EXCHANGER |
| API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| EN ISO 15138:2007 | Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007) |
| EN 12861:2018 | Copper and copper alloys - Scrap |
| I.S. CEN TS 13388:2004 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| I.S. EN 12861:1999 | COPPER AND COPPER ALLOYS - SCRAP |
| UNE-CEN/TS 13388:2010 EX | Copper and copper alloys - Compendium of compositions and products |
| ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
| BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
| EN 14276-1:2006+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| BS EN 14276-1 : 2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| CEN/TS 13388:2015 | Copper and copper alloys - Compendium of compositions and products |
| EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
| PREN 14276-1 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| UNE-EN 50216-10:2010 | Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers |
| CEI EN 50216-10 : 2010 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
| EN 50216-10:2009 | Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers |
| EN 50216-9:2009 | Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers |
| UNE-EN 14276-1:2007 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 1971-2:2011 | Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface |
| EN ISO 8493:2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 2624:1990 | Copper and copper alloys — Estimation of average grain size |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 16090:2011 | Copper and copper alloys - Estimation of average grain size by ultrasound |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
| EN 1971-1:2011 | Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 2624:1995 | Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 196:1978 | Wrought copper and copper alloys — Detection of residual stress — Mercury(I) nitrate test |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| EN ISO 196:1995 | Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test (ISO 196:1978) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.