EN 12408:2004
Current
The latest, up-to-date edition.
Safety requirements for cableway installations designed to carry persons - Quality assurance
10-20-2004
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for quality assurance systems
4.1 Product identification and traceability
4.2 Control of the production, installation and customer
service processes
5 Additional requirements
5.1 General
5.2 Organizational information
5.3 Pre-operation inspection
5.4 Control of non-conforming products
Bibliography
This document specifies the safety requirements applicable to quality assurance for cableway installations designed to carry persons. It sets out provisions for the procedures for quality assurance which supplement the requirements of the other standards cited in the foreword. It is applicable to the different cableway systems.This document applies to suppliers of cableway installations designed to carry persons or of safety components for cableway installations designed to carry persons, regardless of whether or not they maintain a quality management system conforming to EN ISO 9001 certified by a certification body accredited in accordance with EN 45012.The provisions of clause 4 apply in all cases.In addition, if quality management systems are used, reference shall be made to EN ISO 9001.For the case of suppliers who do not maintain any quality management system in accordance with EN ISO 9001, the provisions of this document are to be regarded as minimum requirements.The requirements relating to the traceability of safety components, which are applicable to all suppliers, are intended to facilitate the recall or the investigation of components which threaten to endanger safety.The requirements in this document are intended to ensure quality and do not replace the technical requirements in standards EN 1709, EN 1908, EN 1909, EN 12927 1, EN 12927 2, EN 12927 3, EN 12927-4, EN 12927 5, EN 12927 6, EN 12927 7, EN 12927 8, EN 12929 1, EN 12929 2, EN 12930, EN 12397, EN 13107, EN 13223, EN 13243, prEN 13796 1, prEN 13796-2 and prEN 13796-3, but supplement them.This document is not applicable either to cableways for goods transport or to inclined lifts.
Committee |
CEN/TC 242
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
PN EN 12408 : 2007 | Identical |
DIN EN 12408:2005-06 | Identical |
NBN EN 12408 : 2004 | Identical |
UNE 135201:1997 EX | Identical |
SN EN 12408 : 2005 | Identical |
BS EN 12408:2004 | Identical |
I.S. EN 12408:2004 | Identical |
NF EN 12408 : 2004 | Identical |
NEN EN 12408 : 2004 | Identical |
NS EN 12408 : 1ED 2005 | Identical |
UNI EN 12408 : 2007 | Identical |
UNE-EN 12408:2004 | Identical |
UNE-EN 12408:2006 | Identical |
13/30277122 DC : 0 | BS EN 12929-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 1: REQUIREMENTS FOR ALL INSTALLATIONS |
CEN/TR 14819-2:2005 | Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations |
I.S. EN 1709:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS |
EN 1709:2004 | Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks |
13/30277116 DC : 0 | BS EN 12930 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS |
PREN 12929-1 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 1: REQUIREMENTS FOR ALL INSTALLATIONS |
12/30260958 DC : 0 | BS EN 12397 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - OPERATION |
PREN 12929-2 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 2: ADDITIONAL REQUIREMENTS FOR REVERSIBLE BICABLE AERIAL ROPEWAYS WITHOUT CARRIER TRUCK BRAKES |
13/30277463 DC : 0 | BS EN 12927 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES |
PREN 1909 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
I.S. EN 1907:2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TERMINOLOGY |
DIN EN 13223:2015-11 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
DIN EN 12927-6:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 6: DISCARD CRITERIA |
DIN EN 12927-4:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS |
BS EN 12927-3:2004 | Safety requirements for cableways installation designed to carry persons. Ropes. Long splicing of 6 strand hauling, carrying hauling and towing ropes |
BS EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons. General requirements Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
BS EN 13243:2015 | Safety requirements for cableway installations designed to carry persons. Electrical equipment other than for drive systems |
BS EN 12927-7:2004 | Safety requirments for cableways installations designed to carry persons. Ropes Inspection, repair and maintenance |
EN 12927-1:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings |
EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
DIN EN 12397:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - OPERATION |
EN 12927-3:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
EN 12927-4:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors |
EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
PREN 13243 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS |
13/30277125 DC : 0 | BS EN 1908 - SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
13/30277119 DC : 0 | BS EN 12929-2 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 2: ADDITIONAL REQUIREMENTS FOR REVERSIBLE BICABLE AERIAL ROPEWAYS WITHOUT CARRIER TRUCK BRAKES |
BS EN 1907:2017 | Safety requirements for cableway installations designed to carry persons. Terminology |
PREN 1908 : DRAFT 2013 | SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
PREN 13107 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
I.S. EN 12927-3:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 3: LONG SPLICING OF 6 STRAND HAULING, CARRYING HAULING AND TOWING ROPES |
DIN EN 13107:2015-09 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
DIN EN 12927-5:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 5: STORAGE, TRANSPORTATION, INSTALLATION AND TENSIONING |
DIN EN 12927-7:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 7: INSPECTION, REPAIR AND MAINTENANCE |
DIN EN 12927-1:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS |
UNE-EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
UNE-EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
UNE-EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
I.S. EN 13796-1:2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
I.S. EN 1909:2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
DIN EN 1908:2015-11 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
I.S. EN 12397:2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - OPERATION |
I.S. EN 1908:2015 | SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
DIN EN 13796-1:2006-01 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
I.S. EN 12929-2:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 2: ADDITIONAL REQUIREMENTS FOR REVERSIBLE BICABLE AERIAL ROPEWAYS WITHOUT CARRIER TRUCK BRAKES |
I.S. EN 13223:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT |
I.S. EN 13107:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
I.S. EN 12930:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS |
DIN EN 12929-2:2015-05 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
I.S. EN 13243:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS |
13/30277128 DC : 0 | BS EN 1709 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS |
PD CEN/TR 14819-2:2005 | Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Other funicular railways and other installations |
13/30277460 DC : 0 | BS EN 1909 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
12/30260955 DC : 0 | BS EN 13796-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
PREN 12930 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS |
17/30358090 DC : 0 | BS EN 1709 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION AND INSTRUCTIONS FOR MAINTENANCE AND OPERATIONAL INSPECTION |
I.S. CEN TR 14819-2:2006 | SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 2: OTHER FUNICULAR RAILWAYS AND OTHER INSTALLATIONS |
I.S. EN 12927-6:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 6: DISCARD CRITERIA |
I.S. EN 12927-4:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS |
I.S. EN 12927-1:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS |
DIN EN 1909:2013-04 (Draft) | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
UNE-EN 12927-7:2006 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
UNE-EN 12927-6:2006 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
PREN 13223 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT |
13/30277113 DC : 0 | BS EN 13223 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT |
13/30277110 DC : 0 | BS EN 13243 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS |
PREN 1709 : DRAFT 2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION AND INSTRUCTIONS FOR MAINTENANCE AND OPERATIONAL INSPECTION |
13/30275585 DC : 0 | BS EN 13107 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
EN 1907:2017 | Safety requirements for cableway installations designed to carry persons - Terminology |
I.S. EN 12927-7:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 7: INSPECTION, REPAIR AND MAINTENANCE |
I.S. EN 12927-5:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 5: STORAGE, TRANSPORTATION, INSTALLATION AND TENSIONING |
I.S. EN 12927-2:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 2: SAFETY FACTORS |
DIN EN 12397:2012-05 (Draft) | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - OPERATION |
UNE-EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
BS EN 12927-1:2004 | Safety requirements for cableways installation designed to carry persons. Ropes Selection criteria for ropes and their end fixing |
BS EN 13223:2015 | Safety requirements for cableway installations designed to carry persons. Drive systems and other mechanical equipment |
BS EN 13107:2015 | Safety requirements for cableway installations designed to carry persons. Civil engineering works |
BS EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons. Ropes Safety factors |
UNE-EN 13796-1:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
UNE-EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
BS EN 1909:2017 | Safety requirements for cableway installations designed to carry persons. Recovery and evacuation |
UNE-EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
BS EN 12927-5:2004 | Safety requirements for cableway installations designed to carry person. Ropes Storage, transportation, installation and tensioning |
BS EN 13796-1:2005 | Safety requirements for cableway installations designed to carry persons. Carriers Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
BS EN 12397:2017 | Safety requirements for cableway installations designed to carry persons. Operation |
BS EN 1908:2015 | Safety requirements of cableway installations designed to carry persons. Tensioning devices |
UNE-EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
DIN EN 13796-1:2012-06 (Draft) | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
EN 13796-1:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
PREN 13796-1 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS |
DIN EN 1709:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS |
BS EN 1709:2004 | Safety requirements for cableways for cableway installations designed to carry persons. Precommissioning inspection, maintenance and operational inspection and checks |
DIN EN 12927-2:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 2: SAFETY FACTORS |
DIN EN 12927-3:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 3: LONG SPLICING OF 6 STRAND HAULING, CARRYING HAULING AND TOWING ROPES |
BS EN 12927-4:2004 | Safety requirements for cableway installations designed to carry person. Ropes End fixings |
BS EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons. Ropes Discard criteria |
EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
EN 12927-5:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, installation and tensioning |
EN 12927-7:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
EN 12929-1:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
PREN 1907 : DRAFT 2014 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TERMINOLOGY |
EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
PREN 13796-1 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS |
EN 12927-1:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings |
EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
PREN 13796-2 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 2: SLIPPING RESISTANCE TESTS FOR GRIPS |
EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors |
EN 12927-7:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 12927-4:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
EN 12927-3:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
EN 1709:2004 | Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks |
EN 12927-5:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, installation and tensioning |
EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
EN 12927-8:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT) |
EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
PREN 13796-3 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 3: FATIGUE TESTING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.