EN 12350-1:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Testing fresh concrete - Part 1: Sampling
Superseded date
06-26-2019
Superseded by
Published date
03-18-2009
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Apparatus
5 Sampling
6 Report of sampling
This European Standard specifies two procedures for sampling fresh concrete, by composite sampling and byspot sampling.NOTE The requirement for remixing the sample before tests on the fresh concrete, or before making test specimens,is included in the relevant standards.When mixing and sampling of concrete is done in a laboratory, different procedures may be required.
| Committee |
CEN/TC 104
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| SN EN 12350-1 : 2009 | Identical |
| PN EN 12350-1 : 2011 | Identical |
| DIN EN 12350-1:2009-08 | Identical |
| NF EN 12350-1 : 2012 | Identical |
| NBN EN 12350-1 : 2009 | Identical |
| UNI EN 12350-1 : 2009 | Identical |
| NS EN 12350-1 : 2009 | Identical |
| ONORM EN 12350-1 : 2009 | Identical |
| I.S. EN 12350-1:2009 | Identical |
| NEN EN 12350-1 : 2009 | Identical |
| UNE-EN 12350-1:2009 | Identical |
| BS EN 12350-1:2009 | Identical |
| 17/30360063 DC : DRAFT SEP 2017 | BS EN 12350-4 - TESTING FRESH CONCRETE - PART 4: DEGREE OF COMPACTABILITY |
| 17/30360072 DC : 0 | BS EN 12390-5 - TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| S.R. CEN TR 15678:2008 | CONCRETE - RELEASE OF REGULATED DANGEROUS SUBSTANCES INTO SOIL, GROUNDWATER AND SURFACE WATER - TEST METHOD FOR NEW OR UNAPPROVED CONSTITUENTS OF CONCRETE AND FOR PRODUCTION CONCRETES |
| PD CEN/TR 15678:2008 | Concrete. Release of regulated dangerous substances into soil, groundwater and surface water. Test method for new or unapproved constituents of concrete and for production concretes |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| UNI EN 12350-10 : 2010 | TESTING FRESH CONCRETE - PART 10: SELF-COMPACTING CONCRETE - L BOX TEST |
| 17/30360069 DC : DRAFT SEP 2017 | BS EN 12350-3 - TESTING FRESH CONCRETE - PART 3: VEBE TEST |
| 03/314372 DC : DRAFT DEC 2003 | BS EN 14845-1 - TEST METHODS FOR FIBRES IN CONCRETE - PART 1 - REFERENCE CONCRETES |
| UNE-EN 12350-11:2010 | Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test |
| 03/302295 DC : DRAFT APR 2003 | EN 14651 - PRECAST CONCRETE PRODUCTS - TEST METHOD FOR METALLIC FIBER CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH |
| ONORM EN 12390-5 : 2009 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| EN 12390-13:2013 | Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression |
| UNI EN 12350-6 : 2009 | TESTING FRESH CONCRETE - PART 6: DENSITY |
| BS EN 206 : 2013 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| I.S. EN 12350-2:2009 | TESTING FRESH CONCRETE - PART 2: SLUMP-TEST |
| S.R. CEN/TR 16563:2013 | PRINCIPLES OF THE EQUIVALENT DURABILITY PROCEDURE |
| 15/30317321 DC : 0 | BS EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
| I.S. EN 12390-2:2009 | TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| BS EN 13791:2007 | Assessment of in-situ compressive strength in structures and pre-cast concrete components |
| BS EN 13877-1:2013 | Concrete pavements Materials |
| UNE-EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| PD CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete. Internal structural damage |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| EN 12350-7:2009 | Testing fresh concrete - Part 7: Air content - Pressure methods |
| EN 12350-6:2009 | Testing fresh concrete - Part 6: Density |
| EN 12350-2:2009 | Testing fresh concrete - Part 2: Slump-test |
| DIN EN 14651:2007-12 | TEST METHOD FOR METALLIC FIBERED CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL) |
| EN 12350-9:2010 | Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test |
| EN 12350-10:2010 | Testing fresh concrete - Part 10: Self-compacting concrete - L box test |
| EN 12390-5:2009 | Testing hardened concrete - Part 5: Flexural strength of test specimens |
| CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete - Internal structural damage |
| CEN/TR 16563:2013 | Principles of the equivalent durability procedure |
| EN 1354:2005 | Determination of compressive strength of lightweight aggregate concrete with open structure |
| I.S. EN 14944-1:2006 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| 17/30360066 DC : DRAFT SEP 2017 | BS EN 12350-5 - TESTING FRESH CONCRETE - PART 5: FLOW TABLE TEST |
| 12/30259409 DC : 0 | BS EN 12390-13 - TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| I.S. EN 12350-5:2009 | TESTING FRESH CONCRETE - PART 5: FLOW TABLE TEST |
| I.S. EN 13791:2007 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| NF EN 12350-10 : 2010 | TESTING FRESH CONCRETE - PART 10: SELF-COMPACTING CONCRETE - L BOX TEST |
| NF EN 12350-11 : 2010 | TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST |
| UNI EN 12350-5 : 2009 | TESTING FRESH CONCRETE - PART 5: FLOW TABLE TEST |
| UNI EN 12350-9 : 2010 | Testing fresh concrete - Part 9: Self- compacting concrete - V-funnel test |
| I.S. EN 12350-10:2010 | TESTING FRESH CONCRETE - PART 10: SELF-COMPACTING CONCRETE - L BOX TEST |
| PREN 12390-17 : DRAFT 2018 | TESTING HARDENED CONCRETE - PART 17: DETERMINATION OF CREEP OF CONCRETE IN COMPRESSION |
| I.S. EN 12350-4:2009 | TESTING FRESH CONCRETE - PART 4: DEGREE OF COMPACTABILITY |
| ISO 13270:2013 | Steel fibres for concrete — Definitions and specifications |
| DIN EN 12839:2012-03 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| DIN EN 12350-4:2009-08 | TESTING FRESH CONCRETE - PART 4: DEGREE OF COMPACTABILITY |
| DIN EN 12350-2:2009-08 | TESTING FRESH CONCRETE - PART 2: SLUMP-TEST |
| DIN EN 12350-3:2009-08 | TESTING FRESH CONCRETE - PART 3: VEBE TEST |
| DIN EN 12350-6:2011-03 | TESTING FRESH CONCRETE - PART 6: DENSITY |
| BS EN 12839:2012 | Precast concrete products. Elements for fences |
| BS EN 12350-6:2009 | Testing fresh concrete Density |
| BS EN 12350-7:2009 | Testing fresh concrete Air content. Pressure methods |
| I.S. EN 13877-1:2013 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| DIN EN 12390-3:2009-07 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| I.S. EN 13877-2:2013 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| I.S. EN 12390-6:2009 | TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| DIN EN 12390-6:2010-09 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2009 |
| I.S. EN 14651:2005 | TEST METHOD FOR METALLIC FIBERED CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL) |
| I.S. EN 1354:2005 | DETERMINATION OF COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE |
| DIN EN 206-1:2001-07 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| DIN EN 12350-12:2010-12 | Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test |
| PREN 12350-8 : DRAFT 2017 | TESTING FRESH CONCRETE - PART 8: SELF-COMPACTING CONCRETE - SLUMP-FLOW TEST |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| I.S. CEN TR 15177:2006 | TESTING THE FREEZE-THAW RESISTANCE OF CONCRETE - INTERNAL STRUCTURAL DAMAGE |
| I.S. EN 206-1:2002 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX) |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| BS EN 12350-10:2010 | Testing fresh concrete Self-compacting concrete. L box test |
| BS ISO 13270:2013 | Steel fibres for concrete. Definitions and specifications |
| I.S. EN 12350-12:2010 | TESTING FRESH CONCRETE - PART 12: SELF-COMPACTING CONCRETE - J-RING TEST |
| BS EN 12350-9:2010 | Testing fresh concrete Self-compacting concrete. V-funnel test |
| 07/30164932 DC : 0 | BS EN 12350-11 - TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST |
| 17/30360087 DC : DRAFT SEP 2017 | BS EN 12350-8 - TESTING FRESH CONCRETE - PART 8: SELF-COMPACTING CONCRETE - SLUMP-FLOW TEST |
| 17/30360057 DC : DRAFT SEP 2017 | BS EN 12350-2 - TESTING FRESH CONCRETE - PART 2: SLUMP-TEST |
| PREN 12350-2 : DRAFT 2017 | TESTING FRESH CONCRETE - PART 2: SLUMP-TEST |
| DIN EN 14944-3:2015-06 (Draft) | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| I.S. EN 12390-5:2009 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| I.S. EN 12350-7:2009 | TESTING FRESH CONCRETE - PART 7: AIR CONTENT - PRESSURE METHODS |
| UNI EN 12350-12 : 2010 | TESTING FRESH CONCRETE - PART 12: SELF-COMPACTING CONCRETE - J-RING TEST |
| DIN EN 12350-8:2010-12 | TESTING FRESH CONCRETE - PART 8: SELF-COMPACTING CONCRETE - SLUMP-FLOW TEST |
| PREN 14488-1 : DRAFT 2002 | TESTING SPRAYED CONCRETE - PART 1: SAMPLING FRESH AND HARDENED CONCRETE |
| UNI EN 12350-8 : 2010 | TESTING FRESH CONCRETE - PART 8: SELF-COMPACTING CONCRETE - SLUMP-FLOW TEST |
| PREN 12350-7 : DRAFT 2017 | TESTING FRESH CONCRETE - PART 7: AIR CONTENT - PRESSURE METHODS |
| PREN 12390-6 : DRAFT 2009 | TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| I.S. EN 12390-3:2009 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| DIN EN 1354:2005-09 | Determination of compressive strength of lightweight aggregate concrete with open structure; German version EN 1354:2005 |
| DIN EN 14488-1:2005-11 | TESTING SPRAYED CONCRETE - PART 1: SAMPLING FRESH AND HARDENED CONCRETE |
| DIN EN 13791:2008-05 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| BS EN 1354:2005 | Determination of compressive strength of lightweight aggregate concrete with open structure |
| DIN EN 14944-3:2009-01 | Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| UNI EN 12350-2 : 2009 | TESTING FRESH CONCRETE - PART 2: SLUMP- TEST |
| UNI EN 12839 : 2012 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| UNI EN 12390-2 : 2009 | TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| UNI EN 13791 : 2008 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNI EN 13877-1 : 2013 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| UNI EN 12350-4 : 2009 | TESTING FRESH CONCRETE - PART 4: DEGREE OF COMPACTABILITY |
| UNI EN 14845-1 : 2007 | TEST METHODS FOR FIBRES IN CONCRETE - PART 1: REFERENCE CONCRETES |
| UNI EN 12390-6 : 2010 | TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| UNI EN 12390-3 : 2009 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| UNI CEN/TR 16563 : 2013 | PRINCIPLES OF THE EQUIVALENT DURABILITY PROCEDURE |
| UNI EN 12350-3 : 2009 | TESTING FRESH CONCRETE - PART 3: VEBE TEST |
| UNI EN 13877-2 : 2013 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| DIN EN 12390-13:2014-06 | Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| PREN 12390-2 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| PREN 12350-3 : DRAFT 2017 | TESTING FRESH CONCRETE - PART 3: VEBE TEST |
| NF EN 12350-8 : 2010 | TESTING FRESH CONCRETE - PART 8: SELF-COMPACTING CONCRETE - SLUMP-FLOW TEST |
| 07/30164926 DC : 0 | BS EN 12350-9 - TESTING FRESH CONCRETE - PART 9: SELF-COMPACTING CONCRETE - V-FUNNEL TEST |
| 07/30164923 DC : 0 | BS EN 12350-8 - TESTING FRESH CONCRETE - PART 8: SELF-COMPACTING CONCRETE - SLUMP-FLOW TEST |
| BS EN 12390-13:2013 | Testing hardened concrete Determination of secant modulus of elasticity in compression |
| UNI EN 12350-11 : 2010 | TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST |
| BS EN 12350-11:2010 | Testing fresh concrete Self-compacting concrete. Sieve segregation test |
| PREN 12390-16 : DRAFT 2018 | TESTING HARDENED CONCRETE - PART 16: DETERMINATION OF THE SHRINKAGE OF CONCRETE |
| 12/30257889 DC : 0 | BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| PREN 12390-5 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| UNI EN 12390-13 : 2013 | TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| PD CEN/TR 16563:2013 | Principles of the equivalent durability procedure |
| DIN EN 206:2014-07 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| 07/30164935 DC : 0 | BS EN 12350-12 - TESTING FRESH CONCRETE - PART 12: SELF-COMPACTING CONCRETE - J-RING TEST |
| UNI CEN/TR 15678 : 2008 | CONCRETE - RELEASE OF REGULATED DANGEROUS SUBSTANCES INTO SOIL, GROUNDWATER AND SURFACE WATER - TEST METHOD FOR NEW OR UNAPPROVED CONSTITUENTS OF CONCRETE AND FOR PRODUCTION CONCRETES |
| 04/30083253 DC : DRAFT MAY 2004 | EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| NF EN 12350-12 : 2010 | TESTING FRESH CONCRETE - PART 12: SELF-COMPACTING CONCRETE - J-RING TEST |
| DIN EN 12350-11:2010-12 | Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test |
| 16/30334711 DC : DRAFT JAN 2016 | BS EN 12390-15 - TESTING HARDENED CONCRETE - PART 15: ADIABATIC METHOD FOR THE DETERMINATION OF HEAT RELEASED BY CONCRETE DURING ITS HARDENING PROCESS |
| 17/30360090 DC : DRAFT SEP 2017 | BS EN 12350-6 - TESTING FRESH CONCRETE - PART 6: DENSITY |
| PREN 12350-6 : DRAFT 2017 | TESTING FRESH CONCRETE - PART 6: DENSITY |
| DIN EN 12350-5:2009-08 | TESTING FRESH CONCRETE - PART 5: FLOW TABLE TEST |
| I.S. EN 12350-11:2010 | TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST |
| PREN 12390-3 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| 17/30360096 DC : 0 | BS EN 12390-3 - TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| I.S. EN 12839:2012 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| DIN EN 12350-7:2009-08 | TESTING FRESH CONCRETE - PART 7: AIR CONTENT - PRESSURE METHODS |
| DIN EN 12390-5:2009-07 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| DIN EN 12390-2:2009-08 | TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| BS EN 12390-6:2000 | Testing hardened concrete Tensile splitting strength of test specimens |
| BS EN 14845-1:2007 | Test methods for fibres in concrete Reference concretes |
| UNE-EN 13877-1:2013 | Concrete pavements - Part 1: Materials |
| BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
| BS EN 12350-2:2000 | Testing fresh concrete Slump test |
| BS EN 12390-5:2009 | Testing hardened concrete Flexural strength of test specimens |
| UNE-EN 12839:2012 | Precast concrete products - Elements for fences |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| BS EN 1008:2002 | Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| BS EN 12390-2:2009 | Testing hardened concrete Making and curing specimens for strength tests |
| DIN EN 14944-1:2006-07 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
| BS EN 12390-3:2009 | Testing hardened concrete Compressive strength of test specimens |
| BS EN 13877-2:2013 | Concrete pavements Functional requirements for concrete pavements |
| EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
| BS EN 12350-4:2000 | Testing fresh concrete Degree of compactability |
| CEN/TR 15678:2008 | Concrete - Release of regulated dangerous substances into soil, groundwater and surface water - Test method for new or unapproved constituents of concrete and for production concretes |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 14488-1:2005 | Testing sprayed concrete - Sampling fresh and hardened concrete |
| UNI EN 12390-5 : 2009 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| UNI EN 12350-7 : 2009 | TESTING FRESH CONCRETE - PART 7: AIR CONTENT - PRESSURE METHODS |
| EN 14845-1:2007 | Test methods for fibres in concrete - Part 1: Reference concretes |
| EN 13877-1:2013 | Concrete pavements - Part 1: Materials |
| EN 14944-3:2007 | Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products |
| EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| EN 14651:2005+A1:2007 | Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual) |
| EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
| EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
| I.S. EN 12350-8:2010 | TESTING FRESH CONCRETE - PART 8: SELF-COMPACTING CONCRETE - SLUMP-FLOW TEST |
| PREN 14944-3 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| NF EN 12350-9 : 2010 | TESTING FRESH CONCRETE - PART 9: SELF-COMPACTING CONCRETE - V-FUNNEL TEST |
| PREN 14944-1 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
| 17/30360081 DC : 0 | BS EN 12390-2 - TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| 11/30203534 DC : DRAFT AUG 2011 | BS ISO 13270 - STEEL FIBRES FOR CONCRETE - DEFINITIONS AND SPECIFICATIONS |
| 02/104237 DC : DRAFT JUNE 2002 | PREN 14488-1 - TESTING SPRAYED CONCRETE - PART 1: SAMPLING FRESH AND HARDENED CONCRETE |
| DIN EN 12350-9:2010-12 | Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test |
| BS EN 12350-12:2010 | Testing fresh concrete Self-compacting concrete. J-ring test |
| 17/30349922 DC : 0 | BS EN 13791 - ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| 07/30163668 DC : 0 | BS EN 12839 - PRECAST CONCRETE PRODUCTS - ELEMENTS OF FENCES |
| ONORM EN 12390-2 : 2009 | TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| BS EN 12350-8:2010 | Testing fresh concrete Self-compacting concrete. Slump-flow test |
| PREN 13791 : DRAFT 2017 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| 04/30123574 DC : DRAFT OCT 2004 | EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| PREN 12350-5 : DRAFT 2017 | TESTING FRESH CONCRETE - PART 5: FLOW TABLE TEST |
| 17/30360093 DC : DRAFT SEP 2017 | BS EN 12350-7 - TESTING FRESH CONCRETE - PART 7: AIR CONTENT - PRESSURE METHODS |
| BS EN 14944-3:2007 | Influence of cementitious products on water intended for human consumption. Test methods Migration of substances from factory-made cementitious products |
| EN 12350-8:2010 | Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test |
| 09/30200044 DC : 0 | BS EN 12390-6 - TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| 07/30164929 DC : 0 | BS EN 12350-10 - TESTING FRESH CONCRETE - PART 10: SELF- COMPACTING CONCRETE - L-BOX TEST |
| DIN EN 12350-10:2010-12 | Testing fresh concrete - Part 10: Self-compacting concrete - L box test |
| I.S. EN 12350-6:2009 | TESTING FRESH CONCRETE - PART 6: DENSITY |
| I.S. EN 12350-9:2010 | TESTING FRESH CONCRETE - PART 9: SELF-COMPACTING CONCRETE - V-FUNNEL TEST |
| I.S. EN 12390-13:2013 | TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| 18/30371537 DC : DRAFT APR 2018 | BS EN 12390-16 - TESTING HARDENED CONCRETE - PART 16: DETERMINATION OF THE SHRINKAGE OF CONCRETE |
| 15/30317324 DC : 0 | BS EN 14944-3 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| 18/30371540 DC : DRAFT APR 2018 | BS EN 12390-17 - TESTING HARDENED CONCRETE - PART 17: DETERMINATION OF CREEP OF CONCRETE IN COMPRESSION |
| I.S. EN 14944-3:2007 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS |
| I.S. EN 12350-3:2009 | TESTING FRESH CONCRETE - PART 3: VEBE TEST |
| PREN 12350-4 : DRAFT 2017 | TESTING FRESH CONCRETE - PART 4: DEGREE OF COMPACTABILITY |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| DIN EN 13877-2:2013-06 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| DIN EN 13877-1:2013-06 | Concrete pavements - Part 1: Materials |
| DIN EN 14944-1:2015-06 (Draft) | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| BS EN 12350-3:2000 | Testing fresh concrete Vebe test |
| BS EN 12350-5:2000 | Testing fresh concrete Flow table test |
| BS EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption. Test methods Influence of factory made cementitious products on organoleptic parameters |
| BS EN 1825-1:2004 | Grease separators Principles of design, performance and testing, marking and quality control |
| BS EN 14651 : 2005 | TEST METHOD FOR METALLIC FIBRE CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL) |
| BS EN 14488-1:2005 | Testing sprayed concrete Sampling fresh and hardened concrete |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EN 12350-4:2009 | Testing fresh concrete - Part 4: Degree of compactability |
| EN 12350-11:2010 | Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test |
| EN 12390-6:2009 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
| DIN EN 14845-1:2007-09 | Test methods for fibres in concrete - Part 1: Reference concretes |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 12350-12:2010 | Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test |
| EN 12350-3:2009 | Testing fresh concrete - Part 3: Vebe test |
| EN 12839:2012 | Precast concrete products - Elements for fences |
| DIN EN 1825-1:2004-12 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| ONORM EN 14944-1 : 2006 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| ONORM EN 14944-3 : 2008 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.