EN 12324-2:1999
Current
The latest, up-to-date edition.
Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines
08-18-1999
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Specifications for the material of the
polyethylene tubes
4.1 General
4.2 Characteristics
4.3 Classification and designation
4.4 Overall service (design) coefficient and
design stress
4.5 Reprocessable material
5 General characteristics for pipes
5.1 Visual inspection
5.2 Colour
5.3 Geometrical characteristics
5.4 Length
5.5 Mechanical characteristics
6 Selection of the series number according to the
length
7 Calculation of the reference mass per unit length
8 Internal diameter of coils for transportation
9 Marking
9.1 Contents of the marking
9.2 Spacing between the markings
9.3 Example of marking for 1 m spacing between
the markings
This European standard specifies the characteristics that are required for the polyethylene (PE) tubes for irrigation reel machines. Those tubes are destined to be coiled onto structures of reel machines that conform to the size series specified in EN 12324-1, and to achieve the functions of carrying water and dragging the water emitting system, while it travels along the irrigated lane.
| Committee |
CEN/TC 334
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 12324-2 : 1999 | Identical |
| SN EN 12324-2 : 1999 | Identical |
| NS EN 12324-2 : 1ED 2000 | Identical |
| BS EN 12324-2:1999 | Identical |
| UNE-EN 12324-2:2000 | Identical |
| NBN EN 12324-2 : 1999 | Identical |
| NEN EN 12324-2 : 1999 | Identical |
| DIN EN 12324-2:1999-10 | Identical |
| PN EN 12324-2 : 2002 | Identical |
| I.S. EN 12324-2:2000 | Identical |
| UNI EN 12324-2 : 2002 | Identical |
| BS EN 12324-4:1999 | Irrigation techniques. Reel machine systems Check list of users requirements |
| BS EN 14049:2003 | Water application intensity. Calculation principles and measurement methods |
| EN 12324-3:1999 | Irrigation techniques - Reel machine systems - Part 3: Presentation of technical characteristics |
| EN 12324-4:1999 | Irrigation techniques - Reel machine systems - Part 4: Check list of users requirements |
| BS EN 12325-2:1999 | Irrigation techniques. Centre pivot and moving lateral systems Minimum performances and technical characteristics |
| DIN EN 14049:2006-01 | IRRIGATION TECHNIQUES - WATER APPLICATION INTENSITY - CALCULATION PRINCIPLES AND MEASUREMENT METHODS |
| BS EN 12324-3:1999 | Irrigation techniques. Reel machine systems Presentation of technical characteristics |
| EN ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| EN 12324-1:1998 | Irrigation techniques - Reel machine systems - Part 1: Size series |
| EN 12118:1997 | Plastics piping systems - Determination of moisture content in thermoplastics by coulometry |
| EN 728:1997 | Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time |
| ISO 6964:1986 | Polyolefin pipes and fittings Determination of carbon black content by calcination and pyrolysis Test method and basic specification |
| EN ISO 13479:2009 | Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009) |
| ISO 11420:1996 | Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| EN 921:1994/AC:1995 | PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE AT CONSTANT TEMPERATURE |
| EN 1401-1:2009 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| ISO 1872-1:1993 | Plastics Polyethylene (PE) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| EN 638 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES |
| PREN 1555-1 : DRAFT 2008 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| EN 12099:1997 | Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.