EN 12266-1:2012
Current
Current
The latest, up-to-date edition.
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
Published date
04-04-2012
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test requirements
5 Designation
Annex A (normative) - Test procedures and acceptance
criteria
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 97/23/EC (PED)
Bibliography
This European Standard specifies requirements for tests, test procedures and acceptance criteria for production testing of industrial valves made of metallic materials.The specified tests may also be used as type tests or acceptance tests.Safety devices are not covered by EN 12266-1.When specified as a normative reference in a valve product or performance standard, this European Standard is to be considered in conjunction with given specific requirements of the valve product or performance standard. Where requirements in a product or performance standard differ from those given in this European Standard, the requirements of the product or performance standard apply.NOTEFor testing of industrial valves of thermoplastic materials, ISO 9393-1 and ISO 9393-2 apply.
| Committee |
CEN/TC 69
|
| DevelopmentNote |
Supersedes PREN 12266-1. (04/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 12266-1 : 2012 | Identical |
| SS-EN 12266-1:2012 | Identical |
| NBN EN 12266-1 : 2012 | Identical |
| I.S. EN 12266-1:2012 | Identical |
| NF EN 12266-1 : 2012 | Identical |
| NEN EN 12266-1 : 2012 | Identical |
| UNE-EN 12266-1:2013 | Identical |
| NS EN 12266-1 : 2012 | Identical |
| PN EN 12266-1 : 2012 | Identical |
| BS EN 12266-1:2012 | Identical |
| SN EN 12266-1:2012 | Identical |
| DIN EN 12266-1:2012-06 | Identical |
| DIN 16272:2004-07 | PN 250 and PN 400 valves with shut-off test connection for pressure gauges |
| 06/30157850 DC : 0 | BS EN 13083 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| BS EN 16678:2015 | Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| UNE-EN 15208:2014 | Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications |
| I.S. EN 14341:2006 | INDUSTRIAL VALVES - STEEL CHECK VALVES |
| PREN 1171 : DRAFT 2014 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| UNI EN 1474-1 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| 13/30275593 DC : 0 | BS EN 14432 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES |
| UNE-EN 16257:2013 | Tanks for the transport of dangerous goods - Service equipment - Footvalve sizes other than 100 mm dia (nom) |
| 05/30134037 DC : 0 | EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 09/30197069 DC : 0 | BS EN 488 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN 593:2017 | Industrial valves. Metallic butterfly valves for general purposes |
| BS EN 16767:2016 | Industrial valves. Steel and cast iron check valves |
| I.S. EN 14512:2006 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS - HINGED MANHOLE COVERS AND NECKRINGS WITH PIVOTING BOLTS |
| DIN CEN/TS 13547:2007-02 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| DIN EN 16249:2013-11 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - CAP FOR THE ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| 11/30243007 DC : 0 | BS EN 14564 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| UNE-EN 16767:2017 | Industrial valves - Steel and cast iron check valves |
| 06/30125798 DC : 0 | EN 13082 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR TRANSFER VALVE |
| 14/30301577 DC : 0 | BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| UNE-EN 13547:2014 | Industrial valves - Copper alloy ball valves |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| 18/30368654 DC : 0 | BS EN 488 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE |
| I.S. EN 1474-1:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| I.S. EN 13547:2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| EN 12972:2015 | Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
| UNE-EN 16678:2016 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| 17/30363721 DC : 0 | BS EN 14564 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| I.S. EN ISO 16136:2006 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN 488:2015 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| I.S. EN ISO 21787:2006 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16138:2006 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16139:2006 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16135:2006 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| ONORM EN ISO 16139 : 2008 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16137:2006 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 13709:2010-10 | Industrial valves - Steel globe and globe stop and check valves |
| DIN EN 13081:2012-05 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler (includes Amendment A1:2012) |
| DIN EN 12972:2015-04 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| BS EN 14141:2013 | Valves for natural gas transportation in pipelines. Performance requirements and tests |
| UNE-EN 1983:2014 | Industrial valves - Steel ball valves |
| BS EN 12288:2010 | Industrial valves. Copper alloy gate valves |
| BS EN 15208:2014 | Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications |
| BS EN 14267:2004 | Irrigation techniques. Irrigation hydrants |
| BS EN ISO 16135:2006 | Industrial valves. Ball valves of thermoplastic materials |
| UNE-EN 14595:2016 | Tanks for transport of dangerous goods - Service equipment - Breather device |
| UNE-EN 14432:2015 | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves |
| BS EN 1984:2010 | Industrial valves. Steel gate valves |
| UNE-EN 14433:2015 | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves |
| BS EN ISO 16139:2006 | Industrial valves. Gate valves of thermoplastic materials |
| I.S. EN 14433:2014 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES |
| I.S. EN 12288:2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves |
| EN 12952-14:2004 | Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| UNI EN 12516-2 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS |
| DIN EN 12952-14:2004-09 | Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution |
| EN 13083:2008+A1:2013 | Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading |
| EN 13082:2008+A1:2012 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve |
| EN 13547:2013 | Industrial valves - Copper alloy ball valves |
| EN ISO 28921-1:2017 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| EN 1349:2009 | Industrial process control valves |
| EN 13081:2008+A1:2012 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler |
| CEN/TS 13547:2006 | Industrial valves - Copper alloy ball valves |
| BS EN 1349:2009 | Industrial process control valves |
| I.S. EN 14596:2005 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - EMERGENCY PRESSURE RELIEF VALVE |
| PREN 13774 : DRAFT 2011 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| DIN EN ISO 28921-1:2017-05 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| DIN EN 1474-1:2009-03 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| 11/30246933 DC : 0 | BS ISO 28921-1 - INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW TEMPERATURES APPLICATION - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING |
| 06/30150265 DC : 0 | EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| 14/30294473 DC : 0 | BS EN 488 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN ISO 28921-1:2017 | Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| I.S. EN 12972:2015 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| PREN 13789 : DRAFT 2009 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| PREN 13709 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| PREN 1984 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| 11/30214024 DC : 0 | BS EN 16257 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA. (NOM) |
| BS ISO 5208:2015 | Industrial valves. Pressure testing of metallic valves |
| BS EN 16257:2012 | Tanks for the transport of dangerous goods. Service equipment. Footvalve sizes other than 100 mm dia (nom) |
| 11/30249108 DC : 0 | BS EN 12516-2 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS |
| BS ISO 28921-1 : 2013 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING |
| DIN 16271:2004-07 | PN 250 and PN 400 valves with test connection for pressure gauges |
| 05/30132851 DC : DRAFT APR 2005 | EN 15208 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
| PREN 16257 : DRAFT 2011 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA. (NOM) |
| I.S. EN 593:2017 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| DD CEN/TS 13547:2006 | Industrial valves. Copper alloy ball valves |
| I.S. EN 16125:2015 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| UNE-EN 16668:2016 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
| 17/30341738 DC : 0 | BS EN 14596 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - EMERGENCY PRESSURE RELIEF VALVE |
| DIN EN 12516-4:2015-01 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| EN 12516-4:2014 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| ONORM EN ISO 16136 : 2008 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| ONORM EN ISO 16137 : 2008 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 12288:2010-10 | Industrial valves - Copper alloy gate valves |
| DIN EN 1626:2009-01 | CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
| DIN EN 1171:2015-11 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| DIN EN 1984:2010-10 | Industrial valves - Steel gate valves |
| DIN EN 14433:2014-12 | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves |
| DIN EN 15208:2014-07 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
| DIN EN 14267:2004-10 | IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS |
| DIN EN 14432:2014-12 | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves |
| BS EN 14564:2013 | Tanks for transport of dangerous goods. Terminology |
| ISO 16136:2006 | Industrial valves Butterfly valves of thermoplastics materials |
| UNE-EN 12516-2:2016 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
| BS EN 14595:2005 | Tanks for transport of dangerous goods. Service equipment for tanks. Pressure and vacuum breather vent |
| UNE-EN 14141:2014 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| UNE-EN 593:2009 | Industrial valves - Metallic butterfly valves |
| BS EN 13709:2002 | Industrial valves. Steel globe and globe stop and check valves |
| I.S. EN 1626:2008 | CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
| I.S. EN 1171:2015 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| I.S. EN 13774:2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| I.S. EN 12516-2:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS |
| I.S. EN 1074-6:2009 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| I.S. EN 12266-2:2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
| I.S. EN 14595:2016 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - PRESSURE AND VACUUM BREATHER VENT |
| I.S. EN 13083:2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| I.S. EN 1984:2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| DIN EN 1983:2013-12 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| I.S. EN 12561-3:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| DIN EN 13082:2012-05 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve (includes Amendment A1:2012) |
| I.S. EN 14141:2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| I.S. EN 1983:2013 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| I.S. EN 13081:2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| I.S. EN 1349:2009 | INDUSTRIAL PROCESS CONTROL VALVES |
| I.S. EN 13789:2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| I.S. EN 15208:2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
| I.S. EN 13082:2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR TRANSFER VALVE |
| I.S. EN 13709:2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| I.S. EN 14432:2014 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES |
| UNI EN 14432 : 2014 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES |
| UNI EN 1349 : 2010 | INDUSTRIAL PROCESS CONTROL VALVES |
| VDI/VDE 2178:2009-07 | Fluidic characteristic quantities of quarter turn valves and their determination |
| VDI/VDE 2176:2007-09 | Fluidic characteristic quantities of vanes and their determination |
| VDI 2200:2007-06 | Tight flange connections - Selection, calculation, design and assembly of bolted flange connections |
| 04/30118763 DC : DRAFT AUG 2004 | PREN 12335 - INDUSTRIAL VALVES - CAST IRON PLUG VALVES |
| 14/30297539 DC : 0 | BS EN 14595 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - PRESSURE AND VACUUM BREATHER DEVICE |
| 06/30125744 DC : 0 | EN 13081 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| 09/30205877 DC : 0 | BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES |
| 07/30144848 DC : 0 | ISO 5208 - INDUSTRIAL VALVES - PRESSURE TESTING OF METALLIC VALVES |
| PREN 12516-4 : DRAFT 2011 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| PREN 14596 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - EMERGENCY PRESSURE RELIEF VALVE |
| PREN 14564 : DRAFT 2017 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| I.S. EN 12516-4:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 13/30280746 DC : 0 | BS EN 14433 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES |
| 09/30205883 DC : 0 | BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| UNI EN 14564 : 2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| 09/30205880 DC : DRAFT OCT 2009 | BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| DIN 16262:2004-07 | PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges |
| ISO 5208:2015 | Industrial valves Pressure testing of metallic valves |
| BS EN 14596:2005 | Tanks for transport of dangerous goods. Service equipment for tanks. Emergency pressure relief valve |
| 11/30249111 DC : 0 | BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 16249 : 2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - CAP FOR THE ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| IEC 62828-2:2017 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters |
| DIN EN 13317:2007-02 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY |
| I.S. EN 14564:2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| I.S. EN 16767:2016 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| EN IEC 62828-2:2018 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters |
| BS EN 16668 : 2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
| UNI EN 13547 : 2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| EN 13317:2002+A1:2006 | Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly |
| I.S. CEN TS 13547:2006 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| EN 12516-2:2014 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
| EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| ONORM EN ISO 16138 : 2008 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 13083:2013-08 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| DIN EN 1074-6:2009-03 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| DIN EN 14141:2013-08 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| DIN EN ISO 16135:2006-06 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 488:2016-02 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN 12972:2015 | Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks |
| BS EN ISO 16138:2006 | Industrial valves. Diaphragm valves of thermoplastics materials |
| BS EN 1626:2008 | Cryogenic vessels. Valves for cryogenic service |
| ISO 16135:2006 | Industrial valves Ball valves of thermoplastics materials |
| UNE-EN 16125:2016 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| EN 1474-1:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms |
| EN 488:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| UNI EN 12288 : 2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| UNI EN 1983 : 2013 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| UNI EN 13083 : 2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| UNI EN 13774 : 2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| EN ISO 21787:2006 | Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) |
| UNI EN 13789 : 2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 14141 : 2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| UNI EN 15208 : 2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
| UNI EN 1626 : 2009 | CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
| UNI EN 13082 : 2012 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR TRANSFER VALVE |
| UNI EN 13081 : 2012 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| UNI EN 12561-3 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| UNI EN 1984 : 2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| UNI EN 14433 : 2014 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES |
| BS EN 1171:2015 | Industrial valves. Cast iron gate valves |
| UNI EN 13709 : 2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| UNI EN 12266-2 : 2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
| UNI EN 1074-6 : 2009 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| DIN EN 13547:2013-12 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| DIN 16263:2004-07 | PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges |
| I.S. EN 13317:2002 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY |
| 14/30282872 DC : 0 | BS EN 1171 - INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| DIN EN 14596:2005-06 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - EMERGENCY PRESSURE RELIEF VALVE |
| UNE-EN 16249:2014 | Tanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bottom loading and unloading |
| BS EN 13547:2013 | Industrial valves. Copper alloy ball valves |
| PREN 13317 : DRAFT 2017 | TANKS FOR TRANSPORTING DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY |
| BS EN 1474-1:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms |
| PREN 593 : DRAFT 2016 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| 12/30261228 DC : 0 | BS EN 15208 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
| PREN 12972 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| 13/30276940 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| EEMUA 205 : 2008 | GUIDE TO THE PRODUCTION TESTING OF VALVES FOR THE ENERGY, PROCESS AND RELATED INDUSTRIES |
| BS EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 08/30179182 DC : DRAFT MAY 2008 | BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
| DIN EN 16125:2016-03 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| UNI EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| DIN 16270:2004-07 | PN 250 and PN 400 valves without test connection for pressure gauges |
| DIN EN 16257:2012-12 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA (NOM) |
| I.S. EN ISO 28921-1:2017 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013) |
| UNE-EN 12516-4:2016 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| I.S. EN IEC 62828-2:2018 | REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 2: SPECIFIC PROCEDURES FOR PRESSURE TRANSMITTERS |
| I.S. EN 16668:2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
| PREN 12288 : DRAFT 2009 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| BS EN 16125:2015 | LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
| PREN 14433 : DRAFT 2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES |
| 17/30360691 DC : 0 | BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| 17/30341744 DC : 0 | BS EN 17110 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR MANIFOLD VENT VALVE |
| BS EN 13317:2002 | Tanks for transport of dangerous goods. Service equipment for Tanks. Manhole cover assembly |
| ONORM EN ISO 16135 : 2008 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16138:2006-06 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 13789:2010-09 | Industrial valves - Cast iron globe valves |
| DIN EN ISO 16136:2006-06 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16137:2006-06 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16139:2006-06 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 13774:2013-05 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| BS EN 14512:2006 | Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals. Hinged manhole cover and neckrings with pivoting bolts |
| BS EN 12561-3:2011 | Railway applications. Tank wagons Bottom filling and emptying devices for gases liquefied under pressure |
| BS EN 13789:2002 | Industrial valves. Cast iron globe valves |
| BS EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements |
| UNE-EN 13081:2009 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler |
| ISO 21787:2006 | Industrial valves Globe valves of thermoplastics materials |
| ISO 28921-1:2013 | Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing |
| BS EN 14341:2006 | Industrial valves. Steel check valves |
| EN 16767:2016 | Industrial valves - Steel and cast iron check valves |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS EN ISO 16137:2006 | Industrial valves. Check valves of thermoplastic materials |
| UNE-EN 13083:2009 | Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading |
| BS EN ISO 21787:2006 | Industrial valves. Globe valves of thermoplastics materials |
| UNE-EN 1074-6:2011 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants |
| BS EN 13081 : 2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| UNE-EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| BS EN 13083 : 2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| BS EN 12952-14:2004 | Water-tube boilers and auxiliary installations Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| BS EN 14432:2014 | Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Product discharge and air inlet valves |
| UNE-EN 13082:2009 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve |
| UNE-EN 14564:2013 | Tanks for transport of dangerous goods - Terminology |
| UNE-EN 12561-3:2012 | Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
| BS EN 12569:1999 | Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests |
| ISO 16137:2006 | Industrial valves Check valves of thermoplastics materials |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
| BS EN ISO 16136:2006 | Industrial valves. Butterfly valves of thermoplastic materials |
| UNE-EN 488:2012 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| UNE-EN 12266-2:2013 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| ISO 16139:2006 | Industrial valves Gate valves of thermoplastics materials |
| BS EN 488:2015 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 1983:2013 | Industrial valves. Steel ball valves |
| BS EN 13082 : 2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR TRANSFER VALVE |
| 09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
| BS EN 12516-2:2014 | Industrial valves. Shell design strength Calculation method for steel valve shells |
| BS EN 1074-6:2008 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Hydrants |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| BS EN 12266-2:2012 | Industrial valves. Testing of metallic valves Tests, test procedures and acceptance criteria. Supplementary requirements |
| DIN EN ISO 21787:2006-06 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| EN ISO 16139:2006 | Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) |
| EN 14512:2006 | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts |
| EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| EN ISO 16135:2006 | Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
| EN 16678:2015 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| EN 1626:2008 | Cryogenic vessels - Valves for cryogenic service |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN 15208:2014 | Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications |
| EN 13709:2010 | Industrial valves - Steel globe and globe stop and check valves |
| EN 16668:2016+A1:2018 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
| EN 14432:2014 | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves |
| EN ISO 16136:2006 | Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) |
| EN 1983:2013 | Industrial valves - Steel ball valves |
| EN 16125:2015 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| EN 14595:2016 | Tanks for transport of dangerous goods - Service equipment - Breather device |
| EN 14141:2013 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| EN 1984:2010 | Industrial valves - Steel gate valves |
| EN 13789:2010 | Industrial valves - Cast iron globe valves |
| EN ISO 16138:2006 | Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
| EN 14564:2013 | Tanks for transport of dangerous goods - Terminology |
| EN 14433:2014 | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves |
| EN 16249:2013 | Tanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bottom loading and unloading |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| EN ISO 16137:2006 | Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) |
| EN 14341:2006 | Industrial valves - Steel check valves |
| 13/30287824 DC : 0 | BS EN 16668 - INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
| 09/30205886 DC : 0 | BS EN 13789 - INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| BS EN 16249:2013 | Tanks for the transport of dangerous goods. Service equipment. Cap for the adaptor for bottom loading and unloading |
| 17/30341741 DC : 0 | BS EN 13317 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY |
| 08/30187521 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
| I.S. EN 16257:2012 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA (NOM) |
| 11/30243885 DC : 0 | BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| PREN 14595 : DRAFT 2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - PRESSURE AND VACUUM BREATHER DEVICE |
| 09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
| 16/30339483 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| 10/30227098 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| UNI EN 16257 : 2012 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA (NOM) |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| DIN EN 16767:2016-08 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| 12/30259217 DC : 0 | BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| 14/30302782 DC : 0 | BS ISO 5208 - INDUSTRIAL VALVES - PRESSURE TESTING OF METALLIC VALVES |
| UNE-EN ISO 28921-1:2018 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| 10/30234321 DC : DRAFT DEC 2010 | BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| EN 14596:2005 | Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve |
| 04/30118758 DC : DRAFT AUG 2004 | PREN 12304 - INDUSTRIAL VALVES - STEEL PLUG VALVES |
| DIN EN 14564:2013-04 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY |
| DIN EN 16678:2016-02 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| UNE-EN 12972:2015 | Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
| PREN 14432 : DRAFT 2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES |
| I.S. EN 16249:2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - CAP FOR THE ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| PREN 17110 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR MANIFOLD VENT VALVE |
| I.S. EN 16678:2015 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
| 16/30348709 DC : 0 | BS EN 17070 - INDUSTRIAL VALVES - MINIMUM PERFORMANCE REQUIREMENTS |
| UNI EN 13317 : 2007 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY |
| PREN 488 : DRAFT 2018 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| KTA 3201.3 : 2007(R2012) | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE |
| ONORM EN ISO 21787 : 2008 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 12561-3:2011-10 | Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| UNE-EN 1171:2016 | Industrial valves - Cast iron gate valves |
| BS EN 14433:2014 | Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Foot valves |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| ISO 16138:2006 | Industrial valves Diaphragm valves of thermoplastics materials |
| EN 1074-6:2008 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants |
| EN 1171:2015 | Industrial valves - Cast iron gate valves |
| DIN EN 12266-2:2012-04 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| DIN EN 14512:2006-10 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS - HINGED MANHOLE COVERS AND NECK RINGS WITH PIVOTING BOLTS |
| UNE-EN 16125:2020 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| EN 1349:2009 | Industrial process control valves |
| ISO 9393-2:2005 | Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 2: Test conditions and basic requirements |
| EN 764-1:2015+A1:2016 | Pressure equipment - Part 1: Vocabulary |
| ISO 9393-1:2004 | Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 1: General |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
| ISO 5208:2015 | Industrial valves Pressure testing of metallic valves |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.