EN 12168:2016
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Copper and copper alloys - Hollow rod for free machining purposes
Withdrawn date
01-31-2017
Published date
07-20-2016
Publisher
Sorry this product is not available in your region.
European Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection documentation
10 Marking, packaging, labeling
Bibliography
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy hollow rod, finally produced by drawing or extruding, specifically intended for free machining purposes.NOTEHollow products having an outside diameter greater than 80 mm and/or a wall thickness less than 2 mm are specified in EN 12449.The sampling procedures, the methods of test for verification of conformity to the requirements of this European Standard, are also specified.
| Committee |
CEN/TC 133
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| DIN EN 12168:2000-09 | Identical |
| I.S. EN 12168:2016 | Identical |
| NS EN 12168 : 2016 | Identical |
| UNI EN 12168:2016 | Identical |
| DIN EN 12168:2015-12 (Draft) | Identical |
| NEN EN 12168 : 2016 | Identical |
| UNE-EN 12168:2017 | Identical |
| BS EN 12168:1998 | Identical |
| NF EN 12168 : 2016 | Identical |
| SN EN 12168:2016 | Identical |
| UNI EN 12168 : 2011 | Identical |
| SS-EN 12168:2016 | Identical |
| PN EN 12168 : 2016 | Identical |
| NBN EN 12168 : 2011 | Identical |
| BS EN 12168:2016 | Identical |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| 17/30350901 DC : 0 | BS EN 215 - THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| EN 12516-4:2014 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| 05/30134037 DC : 0 | EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| DIN EN 12449:2015-11 (Draft) | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| BS EN 16617:2015 | Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking |
| DIN EN 16617:2015-07 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| DIN 3523:2001-04 | Fittings for drinking water installations - Extensions |
| DIN CEN/TS 13547:2007-02 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 07/30168082 DC : 0 | BS EN 1173 - COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION |
| UNE-EN 13547:2014 | Industrial valves - Copper alloy ball valves |
| DD CEN/TS 13388:2008 | Copper and copper alloys. Compendium of compositions and products |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| I.S. EN 13547:2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| PD CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications Design method |
| I.S. EN 215:2004 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| BS EN 12288:2010 | Industrial valves. Copper alloy gate valves |
| UNE-EN 331:2016 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| I.S. EN 12288:2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| I.S. EN 14424:2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN 13547:2013 | Industrial valves - Copper alloy ball valves |
| CEN/TS 13547:2006 | Industrial valves - Copper alloy ball valves |
| I.S. EN 12449:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| PREN 1503-4 : DRAFT 2015 | VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS |
| 11/30239433 DC : 0 | BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| ASTM F 2854 : 2010 | Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing |
| DD CEN/TS 13547:2006 | Industrial valves. Copper alloy ball valves |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| ISO 6509-2:2017 | Corrosion of metals and alloys Determination of dezincification resistance of copper alloys with zinc Part 2: Assessment criteria |
| S.R. CEN/TS 13388:2015 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| I.S. EN 16617:2015 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
| PD CEN/TS 13388:2015 | Copper and copper alloys. Compendium of compositions and products |
| DIN EN 12516-4:2015-01 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| DIN EN 12288:2010-10 | Industrial valves - Copper alloy gate valves |
| DIN EN 14422:2013-09 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| DIN EN 14424:2013-09 | HOSE FITTINGS WITH SCREWED FERRULES |
| DIN EN 1173:2008-08 | Copper and copper alloys - Material condition designation |
| I.S. EN 331:2015 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| I.S. EN 14422:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| I.S. EN 1173:2008 | COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION |
| I.S. EN 1503-4:2016 | VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS |
| DIN SPEC 9700 E : 2013 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| PREN 12516-4 : DRAFT 2011 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| I.S. EN 12516-4:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 09/30205880 DC : DRAFT OCT 2009 | BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| 10/30234607 DC : 0 | BS EN 14422 - CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
| 11/30249111 DC : 0 | BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 15/30322049 DC : DRAFT MAY 2015 | BS EN 1503-4 - VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS |
| UNI EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| PD 6641:1999 | Copper and copper alloys. Compendium of compositions and products |
| UNI EN 13547 : 2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. CEN TS 13547:2006 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| DIN EN 331:2016-04 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| UNE-EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| UNI EN 12288 : 2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| UNI EN 14424 : 2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| UNI EN 1173 : 2008 | COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION |
| UNI EN 14422 : 2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| DIN EN 13547:2013-12 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| PREN 14424 : DRAFT 2010 | HOSE FITTINGS WITH SCREWED FERRULES |
| BS EN 13547:2013 | Industrial valves. Copper alloy ball valves |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| BS EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| UNE-EN 16617:2015 | Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking |
| ONORM EN 215 : 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| PREN 12288 : DRAFT 2009 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| S.R. CEN/TR 14585-3:2017 | CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD |
| ASTM F 2854 : 2010 : R2016 | Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing |
| PREN 12449 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| EN 12861:2018 | Copper and copper alloys - Scrap |
| I.S. EN 12861:1999 | COPPER AND COPPER ALLOYS - SCRAP |
| I.S. CEN TS 13388:2004 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| DIN EN 215:2007-11 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| DIN EN 1503-4:2016-06 | VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS |
| UNE-CEN/TS 13388:2010 EX | Copper and copper alloys - Compendium of compositions and products |
| BS EN 215:2004 | Thermostatic radiator valves. Requirements and test methods |
| BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| CEN/TS 13388:2015 | Copper and copper alloys - Compendium of compositions and products |
| UNE-EN 14422:2014 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| BS EN 14424:2013 | Hose fittings with screwed ferrules |
| UNE-EN 14424:2014 | Hose fittings with screwed ferrules |
| EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| EN 14424:2013 | Hose fittings with screwed ferrules |
| EN 215 : 2004 AMD 1 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| EN 16617:2015 | Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications - Part 3: Design method |
| PREN 14422 : DRAFT 2010 | CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
| 10/30234604 DC : 0 | BS EN 14424 - HOSE FITTINGS WITH SCREWED FERRULES |
| UNE-EN 12516-4:2016 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| BS EN 1503-4:2016 | Valves. Materials for bodies, bonnets and covers Copper alloys specified in European Standards |
| BS EN 1173:2008 | Copper and copper alloys. Material condition designation |
| DIN CEN/TS 13388;DIN SPEC 9700:2013-05 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 14977:2006 | Copper and copper alloys - Detection of tensile stress - 5 % ammonia test |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 6509-1:2014 | Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN ISO 6509-1:2014 | Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.