EN 12109:1999
Current
The latest, up-to-date edition.
Vacuum drainage systems inside buildings
04-21-1999
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 System description
5 Principal design factors
5.1 General
5.2 Health and safety
5.3 Availability
5.4 Reliability
5.5 Maintainability
5.6 Noise and odour control
5.7 Energy economy
5.8 Fire resistance
6 Performance
6.1 Wastewater discharge
6.2 Vacuum at line extremities
6.3 Vacuum recovery time
6.4 Automatic restart
7 Design
7.1 General
7.2 Static losses
7.3 Wastewater flow rate
7.4 Dynamic losses
7.5 Vacuum recovery
7.6 System controls
7.7 System status monitoring
8 Installation
9 Commissioning
9.1 General
9.2 Commissioning tests
10 Maintenance
11 Verification
11.1 General
11.2 Performance requirements
11.3 Design requirements
11.4 Installation requirements
12 Assessment of general performance
13 Quality control
Annex A (Normative) Methods of verification of compliance
with the requirements of this standard
Annex B (Normative) Test procedures
B.1 Tightness tests
B.2 System performance tests
Annex C (Normative) Calculation of probable wastewater
flowrate
C.1 Probability Calculation
C.2 Discharge from domestic sanitary appliances
C.3 Selection of the reduction factor (K)
C.4 Vacuum toilets
Annex D (Informative) Vacuum drainage system products -
Requirements and verification
D.1 Performance requirements
D.2 Design requirements
D.3 Verification of compliance with requirements
D.4 Quality assurance
Annex E (Informative) Application of vacuum drainage systems
E.1 General
E.2 System layout
E.3 Support
Annex F (Informative) Bibliography
This European Standard specifies system requirements (performance) and the principal requirements for design and installation with related verification and test methods for vacuum drainage systems inside buildings transporting domestic wastewater from dwellings and commercial properties but excluding stormwater and rainwater.
| Committee |
CEN/TC 165
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 12109 : 1ED 1999 | Identical |
| NF EN 12109 : 1999 | Identical |
| UNI EN 12109 : 2002 | Identical |
| NEN EN 12109 : 1999 | Identical |
| NBN EN 12109 : 1999 | Identical |
| I.S. EN 12109:1999 | Identical |
| UNE-EN 12109:1999 | Identical |
| PN EN 12109 : 2003 | Identical |
| SN EN 12109 : 1999 | Identical |
| BS EN 12109:1999 | Identical |
| DIN EN 12109:1999-06 | Identical |
| PNE-prEN 12109 | Identical |
| BS EN 16323:2014 | Glossary of wastewater engineering terms |
| DIN EN 1124-4:2014-02 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTEWATER SYSTEMS - PART 4: COMPONENTS FOR VACUUM DRAINAGE SYSTEMS AND FOR DRAINAGE SYSTEMS ON SHIPS |
| EN 1123-3:2004 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
| EN 1124-4:2013 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships |
| I.S. EN 16323:2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| DIN EN 1123-3:2005-02 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in shipbuilding |
| UNE-EN 1124-4:2014 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships |
| I.S. EN 1124-4:2013 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTEWATER SYSTEMS - PART 4: COMPONENTS FOR VACUUM DRAINAGE SYSTEMS AND FOR DRAINAGE SYSTEMS ON SHIPS |
| VDI 3810 Blatt 2:2010-05 | Operation and maintenance of building installations - Sanitary systems |
| VDI 2050 Blatt 2:2011-11 | Requirements for mechanical equipment rooms - Sanitary engineering |
| 11/30250267 DC : 0 | BS EN 16323 - GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| UNI EN 16323 : 2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| PREN 1124-4 : DRAFT 2012 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTEWATER SYSTEMS - PART 4: COMPONENTS FOR VACUUM DRAINAGE SYSTEMS AND FOR DRAINAGE SYSTEMS ON SHIPS |
| BS EN 1123-3:2004 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
| UNI EN 1124-4 : 2013 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTEWATER SYSTEMS - PART 4: COMPONENTS FOR VACUUM DRAINAGE SYSTEMS AND FOR DRAINAGE SYSTEMS ON SHIPS |
| DIN EN 16323:2014-07 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| 12/30256801 DC : DRAFT FEB 2012 | BS EN 1124-4 - PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTEWATER SYSTEMS - PART 4: COMPONENTS FOR VACUUM DRAINAGE SYSTEMS AND FOR DRAINAGE SYSTEMS ON SHIPS |
| BS EN 1124-4:2013 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems Components for vacuum drainage systems and for drainage systems on ships |
| BS EN 12056-2:2000 | Gravity drainage systems inside buildings Sanitary pipework, layout and calculation |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| UNE-EN 16323:2014 | Glossary of wastewater engineering terms |
| IEC 60335-2-84:2002+AMD1:2008+AMD2:2013 CSV | Household and similar electrical appliances - Safety - Part 2-84:Particular requirements for toilet appliances |
| EN 12056-2:2000 | Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation |
| BS 5760-3:1982 | Reliability of systems, equipment and components Guide to reliability practices: examples |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| BS 5760-0:1986 | Reliability of systems, equipment and components Introductory guide to reliability |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN ISO 8402 : 1995 | QUALITY MANAGEMENT AND QUALITY ASSURANCE - VOCABULARY |
| EN 1085:2007 | Wastewater treatment - Vocabulary |
| BS 5760-4:1986 | Reliability of systems, equipment and components Guide to specification clauses relating to the achievement and development of reliability in new and existing items |
| BS 5760-5:1991 | Reliability of systems, equipment and components Guide to failure modes, effects and criticality analysis (FMEA and FMECA) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.