EN 12101-3:2015
Current
Current
The latest, up-to-date edition.
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
Published date
08-26-2015
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
4 Requirements
5 Testing, assessment and sampling methods
6 Assessment and verification of constancy of
performance - AVCP
7 Marking, labelling and packaging
Annex A (normative) - Criteria to determine family of fans
in order to select the sizes to be tested
Annex B (normative) - Criteria to determine a family of
motors in order to select the sizes to be tested
Annex C (normative) - Test method for the determination
of fire resistance of powered smoke and heat control
ventilators (fans)
Annex D (normative) - Test methods for electric motors to
determine the impact of the changes on the product
characteristics
Annex E (normative) - Test method for assessing the
response delay and ability to open under environmental
conditions
Annex F (informative) - Explanatory notes
Annex G (informative) - General guidance for installation
and maintenance
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation
Bibliography
This European Standard specifies the products characteristics of powered smoke and heat control ventilators (fans) intended to be used as part of a powered smoke and heat control ventilation system in construction works. It provides test and assessment methods of the characteristics and the compliance criteria of the test assessment results.This European Standard applies to the following:a)fans for smoke and heat control ventilation;b)impulse/jet fans for smoke and heat control ventilation;
| Committee |
CEN/TC 191
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| SN EN 12101-3:2015 | Identical |
| UNE-EN 12101-3:2016 | Identical |
| SS-EN 12101-3:2015 | Identical |
| NEN EN 12101-3 : 2015 | Identical |
| NBN EN 12101-3 : 2015 | Identical |
| NS EN 12101-3 : 2002 | Identical |
| I.S. EN 12101-3:2015 | Identical |
| NF EN 12101-3 : 2015 | Identical |
| PN EN 12101-3 : 2015 | Identical |
| UNI EN 12101-3 : 2004 | Identical |
| BS EN 12101-3:2015 | Identical |
| UNI EN 12101-3:2015 | Identical |
| DIN EN 12101-3:2015-12 | Identical |
| BS EN 1366-10 : 2011 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| I.S. EN 1366-10:2011 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| I.S. EN 60034-30:2009 | ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS |
| EN 60034-30-1:2014 | Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) |
| EN 12101-7:2011 | Smoke and heat control systems - Part 7: Smoke duct sections |
| UNI EN 15423 : 2008 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| BS EN 12101-7:2011 | Smoke and heat control systems Smoke duct sections |
| 15/30300929 DC : 0 | BS EN 13501-4 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS |
| BS EN 15650:2010 | Ventilation for buildings. Fire dampers |
| 11/30247355 DC : 0 | BS EN 60034-30 ED 2 - ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE-CODE) |
| 04/30026990 DC : 0 | BS EN 12101-8 - SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE DAMPERS |
| 05/19971310 DC : DRAFT JAN 2005 | EN 13501-4 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS |
| S.R. CEN/TR 12101-4:2009 | SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
| DIN EN 12101-6:2005-09 | Smoke and heat control systems - Part 6: Specification for pressure differential systems, Kits |
| DIN EN 12101-1:2006-06 | Smoke and heat control systems - Part 1: Specification for smoke barriers |
| I.S. EN 1886:2007 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - MECHANICAL PERFORMANCE |
| I.S. EN 13501-4:2016 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS |
| DIN EN 1886:2009-07 | Ventilation for buildings - Air handling units - Mechanical performance |
| VDI 3803-1 : 2010 COR 2010 | AIR-CONDITIONING - CENTRAL AIR-CONDITIONING SYSTEMS - STRUCTURAL AND TECHNICAL PRINCIPLES (VDI VENTILATION CODE OF PRACTICE) |
| VDI 6010 Blatt 2:2011-05 | Technical safety installations - Automation and control of fire protective services |
| VDI 3564 Blatt 1:2017-05 | Fire protection - Recommendations for high-bay warehouses |
| VDI 3819 Blatt 2:2013-07 | Fire protection building services - Functions and correlations |
| DIN EN 1366-10:2011-07 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| 04/30026984 DC : 0 | BS EN 12101-7 - SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCTS |
| I.S. EN 60034-30-1:2014 | ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) |
| UNE-EN 12101-7:2013 | Smoke and heat control systems - Part 7: Smoke duct sections |
| BS EN 60034-30-1:2014 | Rotating electrical machines Efficiency classes of line operated AC motors (IE code) |
| BS EN 12101-8:2011 | Smoke and heat control systems Smoke control dampers |
| PD IEC/TS 60034-30-2:2016 | Rotating electrical machines Efficiency classes of variable speed AC motors (IE-code) |
| I.S. EN 15423:2008 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| BS EN 13501-4 : 2007 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS |
| UNE-EN 13501-4:2007 | Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems |
| I.S. EN 12101-6:2005 | SMOKE AND HEAT CONTROL SYSTEMS - PART 6: SPECIFICATION FOR PRESSURE DIFFERENTIAL SYSTEMS - KITS |
| UNI EN 1886 : 2008 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - MECHANICAL PERFORMANCE |
| UNE-EN 1366-10:2016 | Fire resistance tests for service installations - Part 10: Smoke control dampers |
| BS EN 60034-30:2009 | Rotating electrical machines Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| CEI EN 60034-30-1 : 2015 | ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) |
| CEN/TR 12101-4:2009 | Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation |
| CEI EN 60034-30 : 2011 | ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE CODE) |
| BS EN 15423:2008 | Ventilation for buildings. Fire precaution for air distribution systems in buildings |
| 01/541305 DC : DRAFT OCT 2001 | BS EN 12101-6 - SMOKE AND HEAT CONTROL SYSTEMS - PART 6: PRESSURE DIFFERENTIAL SYSTEMS - KITS |
| DIN EN 12101-8:2011-08 | Smoke and heat control systems - Part 8: Smoke control dampers |
| UNI EN 12101-8 : 2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| UNI EN 15650 : 2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| I.S. EN 12101-7:2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS |
| PREN 13501-4 : DRAFT 2015 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS |
| I.S. CEN TR 12101-4:2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
| BS EN 12101-6:2005 | Smoke and heat control systems Specification for pressure differential systems. Kits |
| BS EN 1886:2007 | Ventilation for buildings. Air handling units. Mechanical performance |
| UNE-EN 15650:2010 | Ventilation for buildings - Fire dampers |
| BS EN 12101-1 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS |
| EN 15423:2008 | Ventilation for buildings - Fire precautions for air distribution systems in buildings |
| EN 1886:2007 | Ventilation for buildings - Air handling units - Mechanical performance |
| EN 1366-10:2011+A1:2017 | Fire resistance tests for service installations - Part 10: Smoke control dampers |
| EN 15650:2010 | Ventilation for buildings - Fire dampers |
| 14/30301589 DC : 0 | BS EN 1364-5 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 5: AIR TRANSFER GRILLES |
| I.S. EN 12101-8:2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| UNE-EN 12101-8:2015 | Smoke and heat control systems - Part 8: Smoke control dampers |
| DIN EN 12101-7:2011-08 | Smoke and heat control systems - Part 7: Smoke duct sections |
| DIN EN 15423:2008-09 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| DIN EN 15650:2010-09 | Ventilation for buildings - Fire dampers |
| UNI EN 1366-10 : 2011 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| UNI EN 12101-7 : 2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS |
| I.S. EN 15650:2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| IEC 60034-30:2008 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| EN 13501-4:2016 | Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems |
| EN 12101-8:2011 | Smoke and heat control systems - Part 8: Smoke control dampers |
| EN 60034-30:2009 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| ASTM E 228 : 2017 : REDLINE | Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 12101-2:2017 | Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators |
| EN 60085:2008 | Electrical insulation - Thermal evaluation and designation |
| EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 13501-4:2016 | Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| EN ISO 204:2009 | Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| EN 60034-18-41:2014 | Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests |
| ASTM E 1461 : 2013 : REDLINE | Standard Test Method for Thermal Diffusivity by the Flash Method |
| EN ISO 5801:2017 | Fans - Performance testing using standardized airways (ISO 5801:2017) |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 60034-2-1:2014 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC TS 60034-17:2006 | Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide |
| IEC 60034-18-41:2014 | Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests |
| EN 60034-2-1:2014 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 14520-1:2015 | Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| ISO 1099:2017 | Metallic materials — Fatigue testing — Axial force-controlled method |
| CLC/TS 60034-17:2004 | Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide |
| ISO 834-1:1999 | Fire-resistance tests Elements of building construction Part 1: General requirements |
| ISO 204:2009 | Metallic materials Uniaxial creep testing in tension Method of test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.