Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • Shopping Cart
    There are no items in your cart
Please enter a keyword to search
Advanced search
Home
Publishers
CEN
EN 10219-1:2006

EN 10219-1:2006

Current

Current

The latest, up-to-date edition.

Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions

Published date

04-26-2006

Publisher

Comite Europeen de Normalisation

Sorry this product is not available in your region.

Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
   3.1 Terms and definitions
   3.2 Symbols
4 Classification and designation
   4.1 Classification
   4.2 Designation
5 Information to be obtained by the manufacturer
   5.1 Mandatory information
   5.2 Options
   5.3 Example of an order
6 Requirements
   6.1 General
   6.2 Steel manufacturing process
   6.3 Condition of feedstock material
   6.4 Structural hollow section manufacturing process
   6.5 Delivery condition
   6.6 Chemical compositions
   6.7 Mechanical properties
   6.8 Technological properties
   6.9 Surface condition
   6.10 Non-destructive testing of welds
   6.11 Tolerances and mass
7 Inspection
   7.1 Types of inspection
   7.2 Types of inspection document
   7.3 Summary of inspection
8 Sampling
   8.1 Frequency of tests
   8.2 Preparation of samples and test pieces
9 Test methods
   9.1 Chemical analysis
   9.2 Mechanical tests
   9.3 Visual inspection and dimensional check
   9.4 Non-destructive testing
   9.5 Retests, sorting and reprocessing
10 Marking
11 Evaluation of conformity
Annex A (normative) Structural hollow sections of non-alloy
                       quality steels - Chemical composition
                       and mechanical properties
Annex B (normative) Structural hollow sections of fine grain
                       steels - Chemical composition and mechanical
                       properties
Annex C (normative) Location of samples and test pieces
Annex D (normative) Evaluation of conformity
Annex ZA (informative) Clauses of this European Standard
                       addressing the provisions of the EU
                       Construction Products Directive
Bibliography

This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.Requirements for tolerances, dimensions and sectional properties are contained in EN 10219-2.NOTEA range of steel grades is specified in this European Standard and the user should select the grade appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are compatible with those in EN 10025-2 and EN 10025-3.

Committee
CEN/TC 459/SC 3
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

08/30192726 DC : 0 BS EN 1538 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
13/30284484 DC : 0 BS CISPR 14-1 ED 6 - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION
I.S. EN 12079-1:2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING
I.S. EN ISO 14713-2:2009 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING
I.S. EN 10219-2:2006 COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards
UNE-EN 1993-1-10:2013 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
PREN 1536 : DRAFT 2008 EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
PREN 10225-4 : DRAFT 2017 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS
UNE-EN 1993-1-8:2013 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
15/30320416 DC : 0 BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1993-1-2:2010-12 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2009)
BS EN 12811-2:2004 Temporary works equipment Information on materials
BS EN 1993-1-1 : 2005 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
BS EN 1993-5:2007 Eurocode 3. Design of steel structures Piling
DIN EN 1537:2001-01 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
EN 12811-2:2004 Temporary works equipment - Part 2: Information on materials
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
DIN EN 12811-2:2004-04 Temporary works equipment - Part 2: Information on materials; German version EN 12811-2:2004
EN 12811-1:2003 Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 1994-1-2:2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
I.S. EN 1993-5:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX)
08/30192723 DC : 0 BS EN 1536 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
03/103471 DC : DRAFT FEB 2003 BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
11/30239473 DC : 0 BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNE-EN 1993-1-1:2013 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
PREN 1090-2 : DRAFT 2015 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
S.R. CEN ISO TR 20172:2009 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN ISO 14713-2 : 2010 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING
ONORM EN 10219-2 : 2006 COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 1993-1-10:2005 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1993-1-1:2005 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
DIN EN 1537:2014-07 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
DIN EN 1993-1-8:2010-12 Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009)
BS EN 1993-1-10:2005 Eurocode 3. Design of steel structures Material toughness and through-thickness properties
I.S. EN ISO 19902:2007 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
I.S. EN 1537:2013 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
DIN EN 10025-1:2005-02 Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004
09/30211977 DC : 0 BS EN 16031 - ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
CEN ISO/TR 20172:2009 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
BS EN ISO 14713-2:2009 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures Hot dip galvanizing
05/30132920 DC : DRAFT APR 2005 EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES
07/30172380 DC : 0 BS EN 14490 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
UNI EN 10219-2 : 2006 COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
UNE-EN ISO 14713-2:2011 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009)
EN 1090-2:2008+A1:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN ISO 14713-2:2009 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009)
UNI EN 1537 : 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
UNI EN 1993-5 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
UNI EN 1993-1-10 : 2005 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES
UNI EN 1994-1-2 : 2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1993-1-2 : 2005 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1993-1-8 : 2005 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS
UNI EN 1993-1-1 : 2014 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
NF EN ISO 14713-2 : 2010 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING
98/705399 DC : DRAFT MAR 1998 PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS
I.S. EN 10025-1:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
NF ENV 1090-1 : 96 FD EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS
15/30331856 DC : 0 BS EN ISO 10855-1 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINER - DESIGN, MANUFACTURE AND MARKING
ISO 10855-1:2018 Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers
BS EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels Tolerances, dimensions and sectional properties
NF EN 1090-2 : 2009 + A1 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. ENV 1993-5:1998 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING
ISO 14713-2:2009 Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing
BS EN 10025-1:2004 Hot rolled products of structural steels General technical delivery conditions
BS EN 12063:1999 Execution of special geotechnical work. Sheet pile walls
BS EN 1065:1999 Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests
ISO 19902:2007 Petroleum and natural gas industries Fixed steel offshore structures
BS EN 12811-1:2003 Temporary works equipment Scaffolds. Performance requirements and general design
BS EN 1994-1-2 : 2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
BS EN 1993-1-8:2005 Eurocode 3. Design of steel structures Design of joints
ENV 1993-5 : 1998 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING
EN 1537:2013 Execution of special geotechnical works - Ground anchors
UNE-EN 1993-1-2:2016 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
17/30346735 DC : 0 BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS
PREN 1538 : DRAFT 2008 EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
S.R. CEN ISO/TR 20172:2021 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
PD CEN ISO/TR 20172:2009 Welding. Grouping systems for materials. European materials
NORSOK M-120:2008 MATERIAL DATA SHEETS FOR STRUCTURAL STEEL
EN 12079-1:2006 Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking
PREN 10025-1 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNE-EN 1994-1-2:2016 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design.
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. CEN ISO TR 20172:2006 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
17/30346732 DC : 0 BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS
DIN EN 1993-1-1:2010-12 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009)
S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
DIN EN 1994-1-2:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008)
DIN EN 1993-1-10:2010-12 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties (includes Corrigendum AC:2009)
DIN EN 10025-1:2011-04 (Draft) Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011
BS EN 1993-1-2:2005 Eurocode 3. Design of steel structures General rules - Structural fire design
BS EN 12079-1:2006 Offshore containers and associated lifting sets Offshore containers. Design, manufacture and marking
BS EN 1537:2013 Execution of special geotechnical works. Ground anchors
ISO/TR 20172:2009 Welding Grouping systems for materials European materials
UNI EN ISO 19902 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
DIN EN ISO 14713-2:2010-05 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING
DIN EN 12811-1:2004-03 Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design
CR 10313:2000 Classification of grades of steel - Examples of classification related to European Standards
EN 12063:1999 Execution of special geotechnical work - Sheet-pile walls
DIN EN 1993-5:2010-12 Eurocode 3: Design of steel structures - Part 5: Piling (includes Corrigendum AC:2009)
EN 1065:1998 Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests
I.S. EN 12063:1999 EXECUTION OF SPECIAL GEOTECHNICAL WORK - SHEET-PILE WALLS

93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
CR 10261 : 1995 ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS
EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
EN 10256:2000 Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel
EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 10021:2006 General technical delivery conditions for steel products
EN 10246-10:2000 Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN 10204:2004 Metallic products - Types of inspection documents
EN 10246-9:2000 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
ISO 9001:2015 Quality management systems — Requirements
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
ISO 643:2012 Steels Micrographic determination of the apparent grain size
EN 10246-3:1999 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10020:2000 Definition and classification of grades of steel
EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
EN 10266:2003 Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EN 10246-8:1999 Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
EN 10246-5 : 1999 NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us