EN 1010-1:2004+A1:2010
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
Withdrawn date
06-30-2010
Published date
12-08-2010
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification of the safety requirements and/or protective
measures
7 Information for use
Annex A (informative) Classification of zones for printing
presses and finishing machines
Annex B (normative) Audible prestart warning devices
Annex C (informative) Risk analysis relating to the pitch
angle of access stairs
Annex D (informative) Example of layout of an instruction
handbook
Annex E (informative) Noise
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements
of EU Directive 2006/42/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements
of EU Directive 94/9/EC
Bibliography
1.1This document applies to:-printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. This standard also covers machinery used for the handling of paper, products, printing formes and inks (before and after the printing process) as well as machinery for cleaning printing formes and checking the print quality (auxiliary printing machinery).-paper converting machines, i. e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner.NOTESimilar substrates are, for example, board, corrugated board, plastic film, aluminium foil, sheet metal and photographic paper.1.2This document deals with all common significant hazards relevant to printing and paper converting machinery when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).1.3This document is not applicable to printing and paper converting machines which are manufactured before the date of publication of this document by CEN.1.4This document does not apply to:-winder-slitters and sheeters in paper finishing (sheeters with unwinders) (see EN 1034-1:2000, EN 1034-3:2000, EN 1034-5:2005);-office-type collating machines equipped with friction feeders;-mail processing machines;-machines used for filling packages (such as machines for shaping, filling, and closing the package);-textile printing presses.
| Committee |
CEN/TC 198
|
| DevelopmentNote |
Supersedes PREN 1010-1. (10/2005) 2004 Edition Re-issued in December 2010 & incorporates AMD 1 2010. (12/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| GOST EN 1010-1 : 2011 | Identical |
| SN EN 1010-1 : 2005 + A1 2011 | Identical |
| I.S. EN 1010-1:2005 | Identical |
| DIN EN 1010-1:2011-06 | Identical |
| PN EN 1010-1 : 2006 + A1 2011 | Identical |
| UNE-EN 1010-1:2005+A1:2011 | Identical |
| NS EN 1010-1 : 2004 + A1 2010 | Identical |
| UNE-EN 1010-1:2005 | Identical |
| NBN EN 1010-1 : 2005 + A1 2011 | Identical |
| UNI EN 1010-1 : 2011 | Identical |
| NF EN 1010-1 : 2005 + A1 2011 | Identical |
| BS EN 1010-1 : 2004 | Identical |
| NEN EN 1010-1 : 2005 + A1 2010 | Identical |
| ONORM EN 1010-1 : 2011 | Identical |
| DS EN 1010-1 : 2005 + A1 2011 | Identical |
| BS EN 1010-1:2004+A1:2010 | Identical |
| GOST R EN 1010-1 : 2009 | Identical |
| DIN EN 15162:2008-10 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
| BS ISO 12643-3:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Binding and finishing equipment and systems |
| DIN EN 1010-3:2010-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines (includes Amendment A1:2009) |
| BS EN 1034-1 : 2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS |
| EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
| EN 1010-2:2006+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
| EN 13023:2003+A1:2010 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
| EN 1034-5:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
| EN 1010-5:2005 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board |
| EN 1010-4:2004+A1:2009 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
| UNI EN 1034-1 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| EN 1010-3:2002+A1:2009 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines |
| 09/30201361 DC : 0 | BS ISO 12643-2 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 2: PRESS EQUIPMENT AND SYSTEMS |
| 09/30201364 DC : 0 | BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| I.S. EN 1010-5:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD |
| BS EN 15162:2008 | Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws |
| BS ISO 12643-2:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Prepress and press equipment and systems |
| DIN EN 1010-4:2010-12 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines (includes Amendment A1:2009) |
| I.S. EN 1010-4:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| I.S. EN 1010-3:2002 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES |
| DIN EN 1034-1:2010-12 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010) |
| I.S. EN 1034-5:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
| I.S. EN 1034-1:2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| DIN EN 1034-5:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters (includes Amendment A1:2009) |
| I.S. EN 12753:2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 13023:2003 | NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3 |
| 09/30179833 DC : DRAFT MAY 2009 | BS EN 1010-3 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES |
| BS EN 1010-2 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| 01/120061 DC : DRAFT JAN 2001 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
| BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
| 09/30179836 DC : DRAFT MAY 2009 | BS EN 1010-4 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| UNI EN 1010-4 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
| I.S. EN 15162:2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
| DIN EN 13023:2010-08 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 (includes Amendment A1:2010) |
| BS EN 1034-5 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
| BS EN 12753 : 2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 1010-2 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| UNI EN 13023 : 2010 | NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3 |
| UNI EN 12753 : 2010 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 1010-3 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES |
| UNI EN 1034-5 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
| UNI EN 15162 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
| 08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
| EN 1034-1:2000+A1:2010 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
| 09/30186472 DC : 0 | BS EN 13023:2003/A1 - NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3 |
| ISO 12643-2:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems |
| ISO 12648:2006 | Graphic technology Safety requirements for printing press systems |
| DIN EN 12753:2011-02 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010) |
| ISO 12643-3:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems |
| BS EN 1010-3 : 2002 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES |
| BS EN 1010-4 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| BS EN 13023 : 2003 | NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3 |
| EN 15162:2008 | Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws |
| DIN EN 1010-2:2011-05 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery (includes Amendment A1:2010) |
| I.S. EN 1010-2:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| 09/30182299 DC : 0 | BS EN 1010-2:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| DIN EN 1010-5:2005-10 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board |
| UNE-EN 1034-5:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
| ONORM EN 1010-5 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD |
| UNE-EN 1010-4:2004 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
| NS-EN ISO 12643-2:2023 | Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems (ISO 12643-2:2023) |
| UNE-EN 1010-3:2003 | Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Part 3: Cutting machines. |
| UNE-EN 13023:2004 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| ISO 10075-2:1996 | Ergonomic principles related to mental workload — Part 2: Design principles |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN 1539:2015 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 60079-26:2015 | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN ISO 11553-1:2008 | Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| CLC/TS 61496-2:2006 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| EN 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| EN 1034-3:2011 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
| ISO 11689:1996 | Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment |
| EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
| IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
| EN 60079-10-2:2015 | Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
| IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
| EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
| EN 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation |
| EN 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN 1012-1:2010 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
| EN 60079-28:2015 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
| EN 1034-1:2000+A1:2010 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| IEC 61241-17:2005 | Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines) |
| EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| EN 626-2:1996+A1:2008 | Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| EN 60079-25:2010/AC:2013 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
| EN 1034-5:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
| IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
| EN 547-3:1996+A1:2008 | Safety of machinery - Human body measurements - Part 3: Anthropometric data |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN 62061:2005/A2:2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015) |
| EN 13023:2003+A1:2010 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| ISO 10075-1:2017 | Ergonomic principles related to mental workload — Part 1: General issues and concepts, terms and definitions |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN 60079-5:2015 | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
| EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| EN 457 : 1992 | SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
| EN 61241-17:2005 | Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines) |
| IEC 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| IEC 60079-26:2014 RLV | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| IEC 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation |
| ISO 11553-1:2005 | Safety of machinery Laser processing machines Part 1: General safety requirements |
| CLC/TR 50404:2003 | Electrostatics - Code of practice for the avoidance of hazards due to static electricity |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.