EN 1008:2002
Current
Current
The latest, up-to-date edition.
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
Published date
06-19-2002
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Classification of types of water
3.1 Potable water
3.2 Water recovered from processes in the
concrete industry
3.3 Water from underground sources
3.4 Natural surface water and industrial waste
water
3.5 Sea water or brackish water
3.6 Sewage water
4 Requirements
4.1 General
4.2 Preliminary assessment
4.3 Chemical properties
4.4 Setting time and strength
5 Sampling
6 Testing
6.1 Test methods
6.2 Frequency for testing
6.3 Conformity evaluation
7 Report
Annex A (normative) Requirements for the use of water
recovered from processes in the concrete industry
A.1 Scope
A.2 Terms and definitions
A.2.1 Water recovered from processes in the concrete
industry
A.2.2 Combined water
A.2.3 Surplus concrete and mortar
A.2.4 Recovered aggregates
A.3 Limitations on the use of water recovered from
processes in the concrete industry
A.4 Requirements
A.4.1 General
A.4.2 Storage
A.4.3 Distribution of solid material in the water
A.4.4 The mass of solid material present in the
recovered water
A.5 Inspection
A.5.1 Density
A.5.2 Suitability
Annex B (informative) Testing scheme for mixing water for
concrete
Annex C (informative) Recommended test methods
Bibliography
This European Standard specifies the requirements for water that is suitable for making concrete that conforms to EN 206-1 and describes methods for assessing its suitability.
| Committee |
CEN/TC 104
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| PN EN 1008 : 2004 | Identical |
| NS EN 1008 : 1ED 2002 | Identical |
| BS EN 1008:2002 | Identical |
| NF EN 1008 : 2003 | Identical |
| UNI EN 1008 : 2003 | Identical |
| I.S. EN 1008:2002 | Identical |
| NBN EN 1008 : 2002 | Identical |
| NEN EN 1008 : 2002 | Identical |
| UNE-EN 1008:2007 | Identical |
| DIN EN 1008:2002-10 | Identical |
| SN EN 1008 : 2002 | Identical |
| 08/30192726 DC : 0 | BS EN 1538 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| 03/310141 DC : DRAFT AUG 2003 | EN 14754-1 - CURING COMPOUNDS - TEST METHODS - PART 1: DETERMINATION OF WATER RETENTION EFFICIENCY OF COMMON CURING COMPOUNDS |
| PREN 14199 : DRAFT 2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
| I.S. EN 480-15:2013 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES |
| 13/30280740 DC : 0 | BS EN 12699 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| 13/30280743 DC : 0 | BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
| PREN 1536 : DRAFT 2008 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| UNE-EN ISO 21809-5:2018 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| DIN EN 15435:2008-10 | PRECAST CONCRETE PRODUCTS - NORMAL WEIGHT AND LIGHTWEIGHT CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| 03/314372 DC : DRAFT DEC 2003 | BS EN 14845-1 - TEST METHODS FOR FIBRES IN CONCRETE - PART 1 - REFERENCE CONCRETES |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PREN 1766 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - REFERENCE CONCRETES FOR TESTING |
| I.S. EN ISO 21809-5:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017) |
| BS EN 206 : 2013 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| PREN 13914-1 : DRAFT 2013 | DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 1: EXTERNAL RENDERING |
| BS EN 13877-1:2013 | Concrete pavements Materials |
| BS EN 13230-1:2016 | Railway applications. Track. Concrete sleepers and bearers General requirements |
| BS EN 480-2:2006 | Admixtures for concrete, mortar and grout. Test methods Determination of setting time |
| I.S. EN 13914-1:2016 | DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 1: EXTERNAL RENDERING |
| DIN EN 14227-10:2006-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 10: SOIL TREATED BY CEMENT |
| DIN EN 14891:2017-05 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| DIN EN 1766:2017-05 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - REFERENCE CONCRETES FOR TESTING |
| CEN/TS 14754-1:2007 | Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds |
| EN 13230-1:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
| ONORM EN 14487-1 : 2006 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| 11/30203534 DC : DRAFT AUG 2011 | BS ISO 13270 - STEEL FIBRES FOR CONCRETE - DEFINITIONS AND SPECIFICATIONS |
| 08/30192723 DC : 0 | BS EN 1536 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| 05/30129415 DC : DRAFT FEB 2005 | BS EN 480-1 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING |
| BS EN 480-15:2013 | Admixtures for concrete, mortar and grout. Test methods Reference concrete and method for testing viscosity modifying admixtures |
| 13/30265753 DC : 0 | BS EN 13914-2 - DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 2: DESIGN CONSIDERATIONS AND ESSENTIAL PRINCIPLES FOR INTERNAL PLASTERING |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| BS EN ISO 21809-5:2017 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings |
| 11/30248435 DC : 0 | BS EN 14891 - LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 14/30314741 DC : 0 | BS EN 14891 - LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 18/30368690 DC : 0 | BS EN 13108-31 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
| BS EN 13369:2013 | Common rules for precast concrete products |
| UNE-EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
| ISO 21809-5:2017 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings |
| S.R. CEN TS 14754-1:2007 | CURING COMPOUNDS - TEST METHODS - PART 1: DETERMINATION OF WATER RETENTION EFFICIENCY OF COMMON CURING COMPOUNDS |
| UNI EN 15435 : 2008 | PRECAST CONCRETE PRODUCTS - NORMAL WEIGHT AND LIGHTWEIGHT CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| DIN EN 14487-1:2006-03 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| DIN EN 480-13:2015-08 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 13: REFERENCE MASONRY MORTAR FOR TESTING MORTAR ADMIXTURES |
| BS EN 13914-2:2016 | Design, preparation and application of external rendering and internal plastering Internal plastering |
| DIN EN 14891:2015-02 (Draft) | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| BS EN 447:2007 | Grout for prestressing tendons. Basic requirements |
| BS EN 1766:2017 | Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing |
| I.S. EN 13877-1:2013 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| I.S. EN 1766:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - REFERENCE CONCRETES FOR TESTING |
| I.S. EN 480-2:2007 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 2: DETERMINATION OF SETTING TIME |
| I.S. EN 480-13:2015 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 13: REFERENCE MASONRY MORTAR FOR TESTING MORTAR ADMIXTURES |
| DIN EN 1536:2015-10 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| I.S. EN 480-1:2014 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING |
| I.S. EN 934-4:2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
| I.S. EN 447:2007 | GROUT FOR PRESTRESSING TENDONS - BASIC REQUIREMENTS |
| I.S. EN 13914-2:2016 | DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 2: INTERNAL PLASTERING |
| I.S. EN 1536:2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| I.S. EN 14891:2017 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| DIN EN 206-1:2001-07 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| I.S. EN 13230-1:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 14487-1:2005 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| 08/30180275 DC : 0 | BS EN 934-4 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
| 00/106850 DC : DRAFT OCT 2000 | PREN 13914-1 - THE DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - EXTERNAL RENDERING |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| PREN 934-4 : DRAFT 2008 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
| I.S. EN 206-1:2002 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX) |
| DD CEN/TS 14754-1:2007 | Curing compounds. Test methods Determination of water retention efficiency of common curing compounds |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| PD CEN/TR 15123:2005 | Design, preparation and application of internal polymer plastering systems |
| DIN EN 480-15:2013-06 | Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures |
| 14/30278089 DC : 0 | BS ISO 13007-5 - CERAMIC TILES - GROUTS AND ADHESIVES - PART 5: LIQUID APPLIED WATERPROOFING MEMBRANES FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| BS ISO 13270:2013 | Steel fibres for concrete. Definitions and specifications |
| DIN 1045-4:2012-02 | Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and the conformity of prefabricated elements |
| 05/30129418 DC : DRAFT FEB 2005 | BS EN 480-2 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 2: DETERMINATION OF SETTING TIME |
| 14/30310833 DC : 0 | BS EN 1538:2010/A1 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| PREN 14891 : DRAFT 2014 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 02/103010 DC : DRAFT APR 2002 | PREN 13914-2 - DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 2: INTERNAL PLASTERING |
| UNI EN 13369 : 2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. CEN/TR 15123:2005 | DESIGN, PREPARATION AND APPLICATION OF INTERNAL POLYMER PLASTERING SYSTEMS |
| PREN 12699 : DRAFT 2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES |
| EN ISO 21809-5:2017 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| UNE-EN 480-15:2013 | Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures |
| DIN EN 934-4:2009-09 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
| DIN EN 1766:2015-07 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - REFERENCE CONCRETES FOR TESTING |
| DIN EN 480-1:2015-01 | Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
| DIN EN 13914-1:2016-09 | DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 1: EXTERNAL RENDERING |
| DIN EN 13914-2:2016-09 | DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 2: INTERNAL PLASTERING |
| DIN EN 14647:2006-01 | Calcium aluminate cement - Composition, specifications and conformity criteria |
| BS EN 14647:2005 | Calcium aluminate cement. Composition, specifications and conformity criteria |
| UNE-EN 480-13:2015 | Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures |
| BS EN 13880-12:2003 | Hot applied joint sealants Test method for the manufacture of concrete test blocks for bond testing (recipe methods) |
| UNE-EN 480-1:2015 | Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| EN 13914-1:2016 | Design, preparation and application of external rendering and internal plastering - Part 1: External rendering |
| EN 13880-12:2003 | Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods) |
| EN 480-1:2014 | Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
| UNI EN 14647 : 2006 | CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| UNI EN 480-1 : 2014 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING |
| UNI EN 934-4 : 2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNI EN 13877-1 : 2013 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| EN 14487-1:2005 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| UNI EN 447 : 2007 | GROUT FOR PRESTRESSING TENDONS - BASIC REQUIREMENTS |
| UNI EN 14845-1 : 2007 | TEST METHODS FOR FIBRES IN CONCRETE - PART 1: REFERENCE CONCRETES |
| 16/30338749 DC : 0 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| UNI EN 480-15 : 2013 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES |
| PREN 13914-2 : DRAFT 2013 | DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 2: DESIGN CONSIDERATIONS AND ESSENTIAL PRINCIPLES FOR INTERNAL PLASTERING |
| UNI EN ISO 21809-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| BS ISO 13007-5:2015 | Ceramic tiles. Grouts and adhesives Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
| PREN 13369 : DRAFT 2017 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 14/30292279 DC : 0 | BS EN 13230-1 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS |
| 13/30265750 DC : 0 | BS EN 13914-1 - DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 1: EXTERNAL RENDERING |
| PREN 13230-1 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 206:2014-07 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| I.S. CEN/TR 15125:2005 | DESIGN, PREPARATION AND APPLICATION OF INTERNAL CEMENT AND/OR LIME PLASTERING SYSTEMS |
| 08/30160023 DC : DRAFT AUG 2008 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| I.S. CEN/TR 15124:2005 | DESIGN, PREPARATION AND APPLICATION OF INTERNAL GYPSUM PLASTERING SYSTEMS |
| ISO 13270:2013 | Steel fibres for concrete — Definitions and specifications |
| ISO 13007-5:2015 | Ceramic tiles Grouts and adhesives Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
| I.S. EN 15435:2008 | PRECAST CONCRETE PRODUCTS - NORMAL WEIGHT AND LIGHTWEIGHT CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| EN 13369:2018 | Common rules for precast concrete products |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| UNE-EN 13230-1:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
| BS EN 14487-1:2005 | Sprayed concrete Definitions, specifications and conformity |
| BS EN 14845-1:2007 | Test methods for fibres in concrete Reference concretes |
| UNE-EN 13877-1:2013 | Concrete pavements - Part 1: Materials |
| BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
| BS EN 480-1:2014 | Admixtures for concrete, mortar and grout. Test methods Reference concrete and reference mortar for testing |
| BS EN 13914-1:2016 | Design, preparation and application of external rendering and internal plastering External rendering |
| UNE-EN 934-4:2010 | Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling |
| BS EN 934-4:2009 | Admixtures for concrete, mortar and grout Admixtures for grout for prestressing tendons. Definitions, requirements, conformity, marking and labelling |
| BS EN 1536 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| BS EN 14227-10:2006 | Hydraulically bound mixtures. Specifications Soil treated by cement |
| DIN EN 447:2017-09 | Grout for prestressing tendons - Basic requirements |
| EN 1536:2010+A1:2015 | Execution of special geotechnical work - Bored piles |
| EN 14227-10:2006 | Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement |
| EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
| EN 14845-1:2007 | Test methods for fibres in concrete - Part 1: Reference concretes |
| EN 13877-1:2013 | Concrete pavements - Part 1: Materials |
| EN 15435:2008 | Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance |
| EN 447:2007 | Grout for prestressing tendons - Basic requirements |
| EN 480-15:2013 | Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures |
| EN 934-4:2009 | Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling |
| EN 1766:2017 | Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
| EN 480-2:2006 | Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time |
| EN 480-13:2015 | Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures |
| EN 13914-2:2016 | Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering |
| 05/30139297 DC : DRAFT SEP 2005 | EN 447 - GROUT FOR PRESTRESSING TENDONS - BASIC REQUIREMENTS |
| I.S. EN 14227-10:2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 10: SOIL TREATED BY CEMENT |
| 11/30251426 DC : DRAFT OCT 2011 | BS EN 480-15 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES |
| PREN 12716 : DRAFT 2017 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING |
| 17/30354239 DC : 0 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PREN 1538 : DRAFT 2008 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| BS EN 15435:2008 | Precast concrete products. Normal weight and lightweight concrete shuttering blocks. Product properties and performance |
| 12/30257889 DC : 0 | BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| 15/30324098 DC : 0 | BS EN 1766 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - REFERENCE CONCRETES FOR TESTING |
| UNE-EN 13369:2013 | Common rules for precast concrete products |
| UNI CEN/TS 14754-1 : 2007 | CURING COMPOUNDS - TEST METHODS - PART 1: DETERMINATION OF WATER RETENTION EFFICIENCY OF COMMON CURING COMPOUNDS |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PREN 13108-31 : DRAFT 2018 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
| 17/30354260 DC : 0 | BS EN 12716 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING |
| DIN EN 13877-1:2013-06 | Concrete pavements - Part 1: Materials |
| BS EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
| BS EN 480-13:2015 | Admixtures for concrete, mortar and grout. Test methods Reference masonry mortar for testing mortar admixtures |
| UNE-EN 1536:2011 | Execution of special geotechnical work - Bored piles |
| CEN/TR 15123:2005 | Design, preparation and application of internal polymer plastering systems |
| DIN EN 13880-12:2003-11 | HOT-APPLIED JOINT SEALANTS - PART 12: TEST METHOD FOR THE MANUFACTURE OF CONCRETE TEST BLOCKS FOR BOND TESTING (RECIPE METHODS) |
| DIN EN 14845-1:2007-09 | Test methods for fibres in concrete - Part 1: Reference concretes |
| CEN/TR 15125:2005 | Design, preparation and application of internal cement and/or lime plastering systems |
| DIN EN 480-2:2006-11 | Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time |
| CEN/TR 15124:2005 | Design, preparation and application of internal gypsum plastering systems |
| EN 196-21 : 1989 | METHODS OF TESTING CEMENT - DETERMINATION OF THE CHLORIDE, CARBON DIOXIDE AND ALKALI CONTENT OF CEMENT |
| EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| ISO 7890-1:1986 | Water quality Determination of nitrate Part 1: 2,6-Dimethylphenol spectrometric method |
| ISO 9964-2:1993 | Water quality — Determination of sodium and potassium — Part 2: Determination of potassium by atomic absorption spectrometry |
| ISO 9964-3:1993 | Water quality — Determination of sodium and potassium — Part 3: Determination of sodium and potassium by flame emission spectrometry |
| ISO 9297:1989 | Water quality Determination of chloride Silver nitrate titration with chromate indicator (Mohr's method) |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| AS ISO 13007.5:2020 | Ceramic tiles - Grouts and adhesives Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
| ISO 9963-2:1994 | Water quality Determination of alkalinity Part 2: Determination of carbonate alkalinity |
| ISO 7887:2011 | Water quality — Examination and determination of colour |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| EN ISO 7887:2011 | Water quality - Examination and determination of colour (ISO 7887:2011) |
| EN 12350-1:2009 | Testing fresh concrete - Part 1: Sampling |
| ISO 6878:2004 | Water quality — Determination of phosphorus — Ammonium molybdate spectrometric method |
| ISO 4316:1977 | Surface active agents — Determination of pH of aqueous solutions — Potentiometric method |
| EN ISO 9963-2:1995 | Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity (ISO 9963-2:1994) |
| EN 196-3:2016 | Methods of testing cement - Part 3: Determination of setting times and soundness |
| ISO 10530:1992 | Water quality — Determination of dissolved sulfide — Photometric method using methylene blue |
| ISO 9964-1:1993 | Water quality — Determination of sodium and potassium — Part 1: Determination of sodium by atomic absorption spectrometry |
| CR 1901:1995 | Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete |
| ISO 9280:1990 | Water quality Determination of sulfate Gravimetric method using barium chloride |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.