EN 10021:2006
Current
Current
The latest, up-to-date edition.
General technical delivery conditions for steel products
Published date
12-20-2006
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Manufacturing process
6 Supply by an intermediary
7 Requirements
7.1 General
7.2 Chemical composition
7.3 Mechanical properties
7.4 Surface and internal quality
7.4.1 General
7.4.2 Detection of discontinuities
7.4.3 Removal of discontinuities
7.4.4 Repairs by welding
8 Inspection
8.1 Type of inspection documents and type of inspection
8.2 Non-specific inspection
8.3 Specific inspection
8.3.1 General
8.3.2 Testing frequency
8.3.3 Sampling conditions and test pieces
8.3.4 Test procedures
8.4 Invalidation of test results
8.5 Rounding of results of mechanical and chemical tests
9 Sorting and reprocessing
10 Marking
11 Disputes
Bibliography
This European Standard specifies the general technical delivery conditions for all steel products covered byEN 10079 with the exception of steel castings and powder metallurgical products.Where the delivery requirements agreed for the order or specified in the appropriate product standard differ from the general technical delivery conditions defined in this European Standard, then the requirements agreed for the order or specified in the appropriate product standard apply.NOTEInspection documents are covered by EN 10168 and EN 10204.
| Committee |
CEN/TC 459/SC 12
|
| DevelopmentNote |
Together with EN 10204 supersedes EURONORM 21. (11/2006)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 10021 : 2ED 2006 | Identical |
| NEN EN 10021 : 2007 | Identical |
| UNE-EN 10021:2008 | Identical |
| NBN EN 10021 : 2007 | Identical |
| NBN EN 10222-5 : 2000 | Corresponds |
| NBN EN 10222-5 : 2000 | Identical |
| NBN EN 10083-3 : 2007 COR 2008 | Identical |
| I.S. EN 10021:2006 | Identical |
| BS EN 10021:2006 | Identical |
| NBN EN 10083-1 : 2007 | Identical |
| NBN EN 10083-1 : 2007 | Corresponds |
| UNI EN 10021 : 2007 | Identical |
| NF EN 10021 : 2007 | Identical |
| SN EN 10021 : 2007 | Identical |
| PN EN 10021 : 2009 | Identical |
| DIN EN 10021:2007-03 | Identical |
| DIN EN 10149-1:2013-12 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10245-5:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| NF EN 10245-5 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| 11/30239491 DC : 0 | BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| UNE-EN 10088-5:2010 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| UNE-EN 10343:2010 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| 99/709740 DC : DRAFT JUN 99 | PREN 10253-2 - BUTT WELDING PIPE FITTINGS - PART 2: WROUGHT CARBON AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10208-2:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| DIN EN 10152:2009-07 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 08/30180856 DC : DRAFT JUNE 2008 | BS EN 10270-3 - STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| 08/30189622 DC : 0 | BS EN 10223-8 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 8: WELDED MESH GABION PRODUCTS |
| PREN 10217-6 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN 10338:2015-10 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| I.S. EN 10169-2:2006 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| 07/30117697 DC : 0 | BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10016-1:1995 | NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING - PART 1: GENERAL REQUIREMENTS |
| 09/30207517 DC : 0 | BS EN 10217-6 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| 12/30259226 DC : 0 | BS EN 10107 - GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| 08/30180859 DC : DRAFT JUNE 2008 | BS EN 10218-1 - STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
| 17/30346738 DC : 0 | BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
| I.S. EN 10341:2006 | COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| I.S. EN 10292:2007 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10126:1996 | COLD ROLLED ELECTRICAL NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| PREN 10207 : DRAFT 2015 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| 16/30338590 DC : 0 | BS EN 10164 - STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
| 05/30132854 DC : DRAFT APR 2005 | EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| 09/30201500 DC : 0 | BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED AND COLD SIZED SQUARE AND RECTANGULAR TUBES |
| 12/30270641 DC : 0 | BS EN 10222-2 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 12/30270647 DC : 0 | BS EN 10222-4 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH |
| 16/30332611 DC : DRAFT JAN 2016 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| 08/30190326 DC : DRAFT DEC 2008 | BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| CEI EN 50189 : 2000 | CONDUCTORS FOR OVERHEAD LINES - ZINC COATED STEEL WIRES |
| DIN 17455:1999-02 | WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| EN 10085:2001 | Nitriding steels - Technical delivery conditions |
| 15/30325000 DC : 0 | BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| BS EN 15566:2016 | Railway applications. Railway rolling stock. Draw gear and screw coupling |
| 11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 16/30338096 DC : 0 | BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| 10/30201497 DC : 0 | BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 08/30175210 DC : DRAFT APR 2008 | BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| 08/30189604 DC : 0 | BS EN 10223-2 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION, AND FENCING PURPOSES |
| 96/709570 DC : DRAFT JUL 1996 | PREN 10285 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYETHYLENE BASED COATINGS |
| BS EN 10343:2009 | Steels for quenching and tempering for construction purposes. Technical delivery conditions |
| PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| EN 10250-4:1999 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| 04/30123264 DC : DRAFT OCT 2004 | EN 10341 - COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| 08/30180141 DC : DRAFT JUNE 2008 | BS EN 10244-1 - STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 1: GENERAL PRINCIPLES |
| 06/30148769 DC : 0 | EN 10249-1 - COLD FORMED STEEL SHEET PILING - PART 1: TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10222-3:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 3: NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| I.S. EN 10217-4:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 303-1 : DRAFT 2016 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 10169:2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 15773 : 2009 | INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES (DUPLEX SYSTEMS) - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| PREN 10120 : DRAFT 2014 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| I.S. EN 10217-6:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10223-5 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING |
| PREN 10028-1 : DRAFT 2014 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| BS EN 10217-4:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties |
| EN 15773:2018 | Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines |
| 16/30332605 DC : 0 | BS EN 10210-1 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| BS EN 10217-5:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
| I.S. EN 10088-5:2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN 15773:2018 | INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| I.S. EN 10216-2:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN 10222-2:2017 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
| EN 10222-3:2017 | Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
| EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
| DIN EN 10208-1:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| BS EN 297:1994 | Gas-fired central heating boilers. Type B<sub>11</sub> and B<sub>11BS</sub> boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW |
| BS EN 10154:2002 | Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10250-1:1999 | Open steel die forgings for general engineering purposes General requirements |
| BS EN 10095 : 1999-07 | HEAT RESISTING STEELS AND NICKEL ALLOYS |
| BS EN 10304:2001 | Magnetic materials (iron and steel) for use in relays |
| BS EN 10223-2:2012 | Steel wire and wire products for fencing and netting Hexagonal steel wire netting for agricultural, insulation and fencing purposes |
| BS EN 10230-1:2000 | Steel wire nails Loose nails for general applications |
| UNE-EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| BS EN 10113-1:1993 | Hot-rolled products in weldable fine grain structural steels General delivery conditions |
| UNE-EN 10223-1:2013 | Steel wire and wire products for fencing and netting - Part 1: Zinc and zinc-alloy coated steel barbed wire |
| BS EN 10250-3:2000 | Open steel die forgings for general engineering purposes Alloy special steels |
| UNE-EN 10272:2016 | Stainless steel bars for pressure purposes |
| UNE-EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 10089:2002 | Hot rolled steels for quenched and tempered springs. Technical delivery conditions |
| BS EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions |
| BS EN 10222-4:2017 | Steel forgings for pressure purposes Weldable fine grain steels with high proof strength |
| BS EN 10214:1995 | Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10305-2:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes |
| BS EN 39:2001 | Loose steel tubes for tube and coupler scaffolds. Technical delivery conditions |
| UNE-EN 10257-2:2012 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| BS EN 10341:2006 | Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
| BS EN 10205:2016 | Cold reduced tinmill products. Blackplate |
| UNE-EN 10106:2016 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| DIN EN 10305-1:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| BS EN 10249-1:1996 | Cold formed sheet piling of non alloy steels Technical delivery conditions |
| BS EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods) |
| BS EN 10222-5:2017 | Steel forgings for pressure purposes Martensitic, austenitic and austenitic-ferritic stainless steels |
| BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
| BS EN 10238:2009 | Automatically blast-cleaned and automatically prefabrication primed structural steel products |
| I.S. EN 10084:2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10083-2:2006-10 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
| I.S. EN 10223-5:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING |
| I.S. EN 10223-6:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 6: STEEL WIRE CHAIN LINK FENCING |
| I.S. EN 10305-2:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| I.S. EN 10223-7:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| I.S. EN 10216-4:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN 10120:2017 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| I.S. EN 10222-1:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS |
| I.S. EN 10218-1:2012 | STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
| I.S. EN 10106:2015 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| DIN EN 10222-4:2001-12 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH |
| EN 10108:2004 | Round steel rod for cold heading and cold extrusion - Dimensions and tolerances |
| EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10277-1:2008 | Bright steel products - Technical delivery conditions - Part 1: General |
| EN 10230-1:1999 | Steel wire nails - Part 1: Loose nails for general applications |
| EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions |
| EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| EN 10248-1:1995 | Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| EN 10223-8:2013 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| EN 10223-7:2012 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| EN 12952-2:2011 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10209:2013 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| EN 10223-3:2013 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 10270-1:2011+A1:2017 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire |
| EN 10268:2006+A1:2013 | Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| DIN EN 10218-1:2012-03 | STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
| EN 10271:1998 | Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions |
| EN 10270-2:2011 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| EN 10245-2:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| EN 10249-1:1995 | Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| DIN EN 10292:2007-06 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10289:2002 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
| EN 10294-1:2005 | Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
| EN 10304:2001 | Magnetic materials (iron and steel) for use in relays |
| EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
| EN 10253-1:1999 | Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements |
| EN 10223-2:2012 | Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes |
| EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN 10253-3:2008 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| EN 10257-2:2011 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
| EN 10245-3:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| EN 10162:2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
| EN 10238:2009 | Automatically blast-cleaned and automatically prefabrication primed structural steel products |
| EN 10223-5:2012 | Steel wire and wire products for fencing and netting - Part 5: Steel wire woven hinged joint and knotted mesh fencing |
| EN 10245-5:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10257-1:2011 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
| EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
| EN 10147 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10238:2009-10 | AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
| DIN EN 10205:2017-03 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| EN 10205:2016 | Cold reduced tinmill products - Blackplate |
| EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions |
| EN 50189:2000 | Conductors for overhead lines - Zinc coated steel wires |
| EN 10207:2017 | Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
| EN 10223-4:2012 | Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing |
| EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| EN 10016-1:1994 | Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements |
| EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 10214 : 1995 | CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 10165 : 1995 | COLD ROLLED ELECTRICAL ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| EN 10265:1995 | Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| EN 10250-3:1999 | Open die steel forgings for general engineering purposes - Part 3: Alloy special steels |
| EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| I.S. EN 10248-1:1996 | HOT ROLLED SHEET PILING OF NON ALLOY STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| 06/30146724 DC : 0 | EN 10277-1 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| 04/30125076 DC : 0 | EN 10111 - CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 10303 : DRAFT 2013 | THIN MAGNETIC STEEL SHEET AND STRIP FOR USE AT MEDIUM FREQUENCIES |
| I.S. EN 10165:1996 | COLD ROLLED ELECTRICAL ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| DIN EN 10253-2:2008-09 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| 13/30280395 DC : 0 | BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10088-4:2010-01 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| I.S. EN 15566:2016 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| BS EN 10223-8:2013 | Steel wire and wire products for fencing and netting Welded mesh gabion products |
| 16/30323507 DC : 0 | BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| 12/30270633 DC : 0 | BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 12/30270644 DC : 0 | BS EN 10222-3 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 3: NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| 08/30189610 DC : 0 | BS EN 10223-4 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 4: STEEL WIRE WELDED MESH FENCING |
| 11/30239494 DC : 0 | BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| 07/30164617 DC : 0 | BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10245-5:2011 | Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire |
| 11/30253751 DC : 0 | BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| 08/30189607 DC : 0 | BS EN 10223-3 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 3: HEXAGONAL STEEL WIRE NETTING FOR ENGINEERING PURPOSES |
| PREN 10219-1 : DRAFT 2016 | COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| 98/712789 DC : DRAFT AUG 98 | PREN 10302 - CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| UNI EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| 08/30189613 DC : 0 | BS EN 10223-5 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING |
| 15/30331537 DC : 0 | BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| 08/30190329 DC : DRAFT DEC 2008 | BS EN 10238 - AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
| PREN 10253-4 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| PREN 10139 : DRAFT 2013 | COLD ROLLED UNCOATED MILD STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 10164 : DRAFT 2016 | STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
| PREN 10088-2 : DRAFT 2011 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 09/30207501 DC : 0 | BS EN 10217-1 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| 03/103470 DC : DRAFT FEB 2003 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions |
| PREN 10223-6 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 6: STEEL WIRE CHAIN LINK FENCING |
| PREN 10217-4 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10257-1 : DRAFT 2008 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES |
| 05/30132585 DC : DRAFT APR 2005 | EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 01/708775 DC : DRAFT MAY 2001 | PREN 10297-2 - SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL TUBES |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| PREN 10210-1 : DRAFT 2016 | HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| DIN EN 10343:2009-07 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| PREN 10149-2 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| I.S. EN 10217-3:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| I.S. EN 10223-8:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| BS EN 10169 : 2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10217-5:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10257-2 : DRAFT 2008 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES |
| PREN 10272 : DRAFT 2013 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| I.S. EN 10207:2017 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| 17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
| PREN 10217-3 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN 10217-6:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10106 : DRAFT 2013 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| UNE-EN 10088-4:2010 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| EN 10222-4:2017 | Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| I.S. EN 10253-2:2007 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 1559-1:2011-05 | Founding - Technical conditions of delivery - Part 1: General |
| DIN EN 10305-6:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 10302:2008-06 | Creep resisting steels, nickel and cobalt alloys |
| UNE-EN 10120:2018 | Steel sheet and strip for welded gas cylinders |
| DIN EN 10269:2014-02 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| DIN EN 10297-1:2003-06 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| DIN EN 10216-2:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 10297-2:2006-02 | Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| DIN EN 10130 : 2007-04 | COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10216-4:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
| BS EN 10312:2002 | Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions |
| UNE-EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| UNE-EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| UNE-EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| BS EN 10162:2003 | Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances |
| BS EN 10155:1993 | Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions |
| DIN EN 10305-3:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
| BS EN 10270-1 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| BS EN 10215:1995 | Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10250-2:2000 | Open steel die forgings for general engineering purposes Non-alloy quality and special steels |
| UNE-EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
| UNE-EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| DIN EN 10270-2:2012-01 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
| I.S. EN 10305-5:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| I.S. EN 10216-1:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| I.S. EN 10273:2016 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| I.S. EN 10305-6:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN 10223-3:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| I.S. EN 10245-2:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| I.S. EN 10216-3:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| I.S. EN 10130:2006 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10257-1:2011 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES |
| I.S. EN 10152:2017 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10208-2:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| I.S. EN 10223-2:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION AND FENCING PURPOSES |
| I.S. EN 10222-5:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
| DIN EN 10028-1:2017-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10296-2:2006 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| I.S. EN 10209:2013 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10270-1:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| I.S. EN 10223-1:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| I.S. EN 10216-5:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 10210-1:2006-07 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| I.S. EN 10264-1:2012 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10222-3:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 3: NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN 10217-7:2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| DIN EN 10222-2:2000-04 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURES PROPERTIES |
| I.S. EN 10245-4:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN 10303:2015 | THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
| I.S. EN 10205:2016 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| DIN EN 10208-1:1998-02 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| DIN EN 10169-3:2003-09 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS |
| DIN EN 10088-2:2014-12 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 10169-2:2006-07 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| UNE-EN 10238:2011 | Automatically blast-cleaned and automatically prefabrication primed structural steel products |
| DIN EN 10222-5:2000-02 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
| I.S. EN 1559-1:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 10270-2:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE |
| I.S. EN 10270-3:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| DIN EN 10169-1:2004-04 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| I.S. EN 10149-1:2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10269:2013 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| I.S. EN 12952-2:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| I.S. EN 10219-1:2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10223-4:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 4: STEEL WIRE WELDED MESH FENCING |
| I.S. EN 10083-2:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
| I.S. EN 10257-2:2011 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES |
| I.S. EN 10222-2:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURES PROPERTIES |
| I.S. EN 10244-1:2009 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 1: GENERAL PRINCIPLES |
| I.S. EN 10088-3:2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 303-1:2017 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 10268:2006 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10305-4:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN 14394:2006 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| I.S. EN 10210-1:2006 | HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10305-1:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| I.S. EN 10238:2009 | AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
| I.S. EN 10305-3:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| DIN EN 10088-3:2014-12 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| DIN EN 10083-3:2007-01 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| I.S. EN 10245-3:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| DIN EN 10025-1:2005-02 | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004 |
| I.S. EN 10028-1:2017 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10277-1:2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN 10277-1:2008-06 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| I.S. EN 10255:2004 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10111:2008 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10107:2014 | GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| I.S. EN 10302:2008 | CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| I.S. EN 10222-4:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH |
| UNI EN 10111 : 2008 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| VDI 4085:2017-04 | Planning, construction and managing of scrapyards - Facilities and equipment for the handling, storage and treatment of scraps and other materials |
| NF EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| 07/30164802 DC : 0 | BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| 15/30324994 DC : 0 | BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| PREN 10305-5 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| 08/30189601 DC : 0 | BS EN 10223-1 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| 11/30251494 DC : 0 | BS EN 10268:2006+A1 - COLD ROLLED STEEL FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 96/709571 DC : DRAFT JUL 1996 | PREN 10286 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYPROPYLENE BASED COATINGS |
| 16/30332608 DC : DRAFT JAN 2016 | BS EN 10210-2 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10169-1:2004 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| I.S. EN 10326:2004 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 297:1994 | GAS FIRED CENTRAL HEATING BOILERS - TYPE B11 AND B11BS BOILERS FITTED WITH ATMOSPHERIC BURNERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| 13/30286664 DC : 0 | BS EN 10139 - COLD ROLLED UNCOATED MILD STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10294-2:2012 | Hollow bars for machining. Technical delivery conditions Stainless steels with specified machinability properties |
| DIN EN 10152:2015-10 (Draft) | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10205:1992-01 | COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE |
| 08/30180847 DC : DRAFT JUNE 2008 | BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| UNE-EN 10338:2016 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| 09/30201490 DC : 0 | BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| 09/30207511 DC : 0 | BS EN 10217-4 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10223-4 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 4: STEEL WIRE WELDED MESH FENCING |
| 08/30182454 DC : DRAFT JULY 2008 | BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| UNI EN 10088-5 : 2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction |
| DIN EN 10253-4:2008-06 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10083-1:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 08/30184300 DC : DRAFT SEP 2008 | BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| 13/30288198 DC : 0 | BS EN 10106 - COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| 09/30200834 DC : 0 | BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| PREN 10209 : DRAFT 2010 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| 14/30312176 DC : 0 | BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| 98/711668 DC : DRAFT AUG 98 | PREN 10301 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - INTERNAL COATING FOR THE REDUCTION OF FRICTION FOR CONVEYANCE OF NON CORROSIVE GAS |
| UNI EN 10216-5 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| 13/30288572 DC : 0 | BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| UNE-EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| 17/30346735 DC : 0 | BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
| 11/30239473 DC : 0 | BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 99/701054 DC : DRAFT JAN 1999 | PREN 10089 - HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| 12/30270650 DC : 0 | BS EN 10222-5 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
| 13/30288575 DC : 0 | BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 09/30207514 DC : 0 | BS EN 10217-5 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 01/715451 DC : DRAFT NOV 2001 | PREN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES |
| 08/30167676 DC : DRAFT JAN 2008 | BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| 05/30132920 DC : DRAFT APR 2005 | EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES |
| 15/30324997 DC : 0 | BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 09/30207521 DC : 0 | BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| DIN 17456:1999-02 | SEAMLESS CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| PREN 10222-1 : DRAFT 2012 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| PREN 10107 : DRAFT 2012 | GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| PREN 10305-6 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| 08/30180838 DC : DRAFT JUNE 2008 | BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| I.S. EN 10250-4:2000 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 4: STAINLESS STEELS |
| 05/30132603 DC : DRAFT APR 2005 | EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| 05/30126202 DC : 0 | EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN 10085:2001 | NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10083-3 : 2006-08 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| UNI EN 10253-4 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| PREN 10210-2 : DRAFT 2016 | HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10164:2005 | STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10294-2:2012 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| UNE-EN 10205:2017 | Cold reduced tinmill products - Blackplate |
| DIN EN 10217-5:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10217-7 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| DIN EN 10217-3:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| PREN 15566 : DRAFT 2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| DIN EN 10217-1:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| UNE-EN 15773:2010 | Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines |
| PREN 10222-3 : DRAFT 2012 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 3: NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. ENV 10169-2:1999 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| BS EN 10217-6:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| PREN 10255 : DRAFT 2010 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| I.S. EN 10225:2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10270-1:2011+A1:2017 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10222-5:2017 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
| DIN EN 10083-1:2006-10 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10132-1:2000 | COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN 10223-5:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING |
| DIN EN 10216-3:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN 10223-4:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 4: STEEL WIRE WELDED MESH FENCING |
| DIN EN 10303:2016-02 | THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
| UNE-EN 10208-1:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
| DIN EN 10089:2003-04 | Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
| DIN EN 10223-2:2013-02 | Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes |
| UNI EN 10216-2 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 14394:2008-12 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| UNE-EN 10216-2:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| DIN EN 10305-2:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| BS EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B |
| UNE-EN 10222-3:2017 | Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
| BS EN 10305-5:2010 | Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes |
| BS EN 10289:2002 | Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings |
| BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| BS EN 10245-3:2011 | Steel wire and wire products. Organic coatings on steel wire PE coated wire |
| BS EN 10224:2002 | Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions |
| BS EN 10264-1:2012 | Steel wire and wire products. Steel wire for ropes General requirements |
| BS EN 10244-1:2009 | Steel wire and wire products. Non-ferrous metallic coatings on steel wire General principles |
| BS EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products Products for building interior applications |
| UNE-EN 10088-3:2015 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNE-EN 10216-4:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
| DIN EN 10305-5:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| UNE-EN 10223-3:2014 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| DIN EN 10222-4:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH |
| DIN EN 10222-5:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
| UNE-EN 10225:2010 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| DIN EN 10222-2:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURES PROPERTIES |
| UNI EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 10257-2 : 2011 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES |
| UNI EN 10208-2 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| UNI EN 10223-6 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 6: STEEL WIRE CHAIN LINK FENCING |
| UNI EN 10107 : 2014 | GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| UNI EN 10269 : 2013 | Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures |
| UNI EN 10225 : 2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10268 : 2013 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10223-8 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| UNI EN 10238 : 2009 | AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
| UNI EN 10245-3 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| UNI EN 10250-1 : 2001 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - GENERAL REQUIREMENTS |
| UNI EN 10083-1 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| UNI EN 14394 : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
| UNI EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN 10219-1 : 2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10257-1 : 2011 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES |
| UNI EN 10244-1 : 2009 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 1: GENERAL PRINCIPLES |
| UNI EN 10255 : 2007 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10083-3 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| UNI EN 10223-7 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| UNI EN 10223-5 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING |
| UNI EN 10245-2 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN 10218-1 : 2012 | STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
| UNI EN 10208-1 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| UNI EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| UNI EN 10264-1 : 2012 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
| UNI EN 10223-1 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| EN 10264-1:2012 | Steel wire and wire products - Steel wire for ropes - Part 1: General requirements |
| UNI EN 10216-4 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNI EN 10216-1 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| I.S. EN 10250-3:2000 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 3: ALLOY SPECIAL STEELS |
| UNI EN 10223-4 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 4: STEEL WIRE WELDED MESH FENCING |
| UNI EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 10084 : 2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10270-2 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE |
| UNI EN 10324 : 2005 | STEEL WIRE AND WIRE PRODUCTS - HOSE REINFORCEMENT WIRE |
| UNI EN 10245-4 : 2011 | Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires |
| UNI EN 10302 : 2008 | CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| UNI EN 10209 : 2013 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10250-2:2000 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 2: - NON-ALLOY QUALITY AND SPECIAL STEELS |
| UNI EN 10216-3 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| UNI EN 10149-1 : 2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10250-1:2000 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS |
| UNI EN 10223-3 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| UNI EN 10223-2 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION AND FENCING PURPOSES |
| 13/30280398 DC : 0 | BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10139:2016-06 | COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 02/713774 DC : DRAFT DEC 2002 | EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10087:1999 | FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS |
| 08/30180147 DC : DRAFT JUNE 2008 | BS EN 10264-1 - STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10327:2004 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 39:2001 | LOOSE STEEL TUBES FOR TUBE AND COUPLER SCAFFOLDS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10154:2002 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| 02/704945 DC : DRAFT APR 2002 | PREN 10326 - CONTINUOUSLY HOT-DIP COATED STRUCTURAL STEELS STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10217-2 : 2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10205 : DRAFT 2014 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| I.S. EN 10336:2007 | CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 98/705399 DC : DRAFT MAR 1998 | PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS |
| UNI EN 10245-5 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| 03/108196 DC : 0 | EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| 08/30180841 DC : DRAFT JUNE 2008 | BS EN 10245-3 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| I.S. EN 10025-1:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 03/105795 DC : DRAFT APR 2003 | EN 10107 - GRAIN-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN FULLY PROCESSED STATE |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| PREN 10223-3 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR ENGINEERING PURPOSES |
| 15/30325003 DC : 0 | BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| 08/30189619 DC : 0 | BS EN 10223-7 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| NF ENV 1090-1 : 96 FD | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| BS EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions |
| PREN 10222-4 : DRAFT 2012 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH |
| 08/30189616 DC : 0 | BS EN 10223-6 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 6: STEEL WIRE CHAIN LINK FENCING |
| UNI EN 10253-3 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| PREN 10223-1 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| UNI EN 10343 : 2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| 14/30301272 DC : 0 | BS EN 10205 - COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| 08/30180844 DC : DRAFT JUNE 2008 | BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| DIN EN 10210-1:2016-01 (Draft) | Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016 |
| DIN 17440:2001-03 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE |
| 14/30294825 DC : 0 | BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 13/30288195 DC : 0 | BS EN 10303 - THIN MAGNETIC STEEL SHEET AND STRIP FOR USE AT MEDIUM FREQUENCIES |
| DIN EN 10253-3:2009-02 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| 13/30241415 DC : 0 | BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| DIN EN 10088-5:2009-07 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| 03/103468 DC : DRAFT FEB 2003 | BS EN 10210-1 - HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| 15/30324991 DC : 0 | BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| 08/30180850 DC : DRAFT JUNE 2008 | BS EN 10270-1 - STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| 08/30180853 DC : DRAFT JUNE 2008 | BS EN 10270-2 - STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE |
| 02/713544 DC : DRAFT NOV 2002 | EN 10268 - COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10294-2 : 2012 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
| 09/30201494 DC : 0 | BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| 01/708774 DC : DRAFT MAY 2001 | PREN 10296-2 - WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL TUBES |
| BS EN 10253-4:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| DIN EN 10223-8:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| BS EN 10088-4:2009 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| DD ENV 10169-2:1999 | Continuously organic coated (coil coated) steel flat products Products for building exterior applications |
| I.S. EN 10338:2015 | HOT ROLLED AND COLD ROLLED NON-COATED PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 10222-5 : DRAFT 2012 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
| PREN 10269 : DRAFT 2011 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| I.S. EN 10346:2015 | CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10217-3:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| PREN 10273 : DRAFT 2013 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 10207:2017 | Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars |
| DIN EN 10217-2:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| I.S. EN 10217-1:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DIN EN 10217-4:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| NF EN 10253-3 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| PREN 10268 : DRAFT 2002 | COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10270-3:2012-01 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| DIN EN 10257-2:2012-02 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| NF EN 10225 : 2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10263-1:2017 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| UNE-EN 10209:2013 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| DIN EN 10244-1:2009-08 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 1: GENERAL PRINCIPLES |
| DIN EN 10324:2004-11 | STEEL WIRE AND WIRE PRODUCTS - HOSE REINFORCEMENT WIRE |
| DIN EN 10107:2014-07 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| DIN EN 10223-6:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 6: STEEL WIRE CHAIN LINK FENCING |
| DIN EN 10268:2013-12 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10216-4:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNE-EN 10208-2:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| DIN EN 10151:2003-02 | STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| DIN EN 10250-4 : 2008-12 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 4: STAINLESS STEELS |
| DIN EN 10106:2016-03 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| DIN EN 10084:2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10223-3:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| DIN EN 10225:2009-10 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10223-7:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| DIN EN 10219-1:2016-01 (Draft) | Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016 |
| DIN EN 10223-1:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| DIN EN 10085:2001-07 | Nitriding steels - Technical delivery conditions; English version of DIN EN 10085 |
| DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| DIN EN 10245-4:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
| UNE-EN 10270-2:2012 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
| BS EN 10222-3:2017 | Steel forgings for pressure purposes Nickel steels with specified low temperature properties |
| BS EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products Products for building exterior applications |
| I.S. EN 10139:2016 | COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 14394 : 2005 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| BS EN 10255:2004 | Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions |
| BS EN 10209:2013 | Cold rolled low carbon steel flat products for vitreous enameling. Technical delivery conditions |
| BS EN 10253-1:1999 | Butt-welding pipe fittings Wrought carbon steel for general use and without specific inspection requirements |
| BS EN 10216-5:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN 10025-1:2004 | Hot rolled products of structural steels General technical delivery conditions |
| BS EN 10303:2015 | Thin magnetic steel strip and sheet for use at medium frequencies |
| BS EN 10250-4 : 2000-02 | OPEN STEEL DIE FORGINGS FOR GENERAL ENGINEERING PURPOSES - STAINLESS STEELS |
| UNE-EN 10303:2016 | Thin magnetic steel strip and sheet for use at medium frequencies |
| BS EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming. Technical delivery conditions |
| UNE-EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| UNE-EN 10223-8:2014 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| BS EN 10223-1:2012 | Steel wire and wire products for fencing and netting Zinc and zinc-alloy coated steel barbed wire |
| BS EN 10084 : 2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10271:1999 | Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions |
| BS EN 10296-2:2005 | Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel |
| BS EN 10087 : 1999-01 | FREE CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS |
| BS EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas |
| BS EN 10106:2015 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| BS EN 10336:2007 | Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming. Technical delivery conditions |
| UNE-EN 10223-5:2013 | Steel wire and wire products for fencing and netting - Part 5: Steel wire woven hinged joint and knotted mesh fencing |
| UNE-EN 10222-4:2017 | Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
| BS EN 10290:2002 | Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings |
| BS EN 10216-3:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| BS EN 10223-7:2012 | Steel wire and wire products for fencing and netting Steel wire welded panels for fencing |
| BS EN 10305-6:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 10083-2:2006 | Steels for quenching and tempering Technical delivery conditions for non alloy steels |
| UNE-EN 12952-2:2012 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| UNE-EN 10245-3:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| BS EN 10270-3:2011 | Steel wire for mechanical springs Stainless spring steel wire |
| UNE-EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| UNE-EN 10223-7:2013 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| BS EN 10218-1:2012 | Steel wire and wire products. General Test methods |
| UNE-EN 10264-1:2012 | Steel wire and wire products - Steel wire for ropes - Part 1: General requirements |
| BS EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| UNE-EN 10245-4:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| BS EN 10083-1:2006 | Steels for quenching and tempering General technical delivery conditions |
| BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNE-EN 10269:2014 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| UNE-EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| UNE-EN 10245-2:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| BS EN 10137-1:1996 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions General delivery conditions |
| BS EN 10108:2004 | Round steel rod for cold heading and cold extrusion. Dimensions and tolerances |
| BS EN 10257-1:2011 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables Land cables |
| BS EN 10270-2:2011 | Steel wire for mechanical springs Oil hardened and tempered spring steel wire |
| BS EN 10257-2:2011 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables Submarine cables |
| BS EN 10305-3:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes |
| BS EN 10324:2004 | Steel wire and wire products. Hose reinforcement wire |
| BS EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions |
| BS EN 10147:2000 | Continuously hot-dip zinc coated structural steels strip and sheet. Technical delivery conditions |
| BS EN 10245-4:2011 | Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
| DIN EN 10270-1:2017-09 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire (includes Amendment A1:2017) |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| BS EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| UNE-EN 10223-2:2013 | Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes |
| BS EN 10142:2000 | Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming. Technical delivery conditions |
| BS EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming. Technical delivery conditions |
| BS EN 10305-1:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes |
| UNE-EN 10216-3:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| UNE-EN 10222-5:2017 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| BS EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| UNE-EN 10223-6:2013 | Steel wire and wire products for fencing and netting - Part 6: Steel wire chain link fencing |
| BS EN 10222-2:2017 | Steel forgings for pressure purposes Ferritic and martensitic steels with specified elevated temperatures properties |
| UNE-EN 10149-1:2014 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
| UNE-EN 10216-5:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| UNE-EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
| UNE-EN 10268:2007 | Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions |
| UNE-EN 10216-1:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| UNE-EN 10169:2011 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| UNE-EN 10270-3:2012 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| UNE-EN 10257-1:2012 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
| BS EN 10085 : 2001-05 | NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10223-4:2012 | Steel wire and wire products for fencing and netting Steel wire welded mesh fencing |
| UNE-EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| BS EN 10297-2:2005 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel |
| BS EN 303-4:1999 | Heating boilers. Heating boilers with forced draught burners Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking |
| BS EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions |
| DIN EN 10224:2005-12 | NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| DIN EN 10292:2003-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| ENV 10169-2 : 1999 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| EN 14394:2005+A1:2008 | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
| EN 10225:2009 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 39:2001 | Loose steel tubes for tube and coupler scaffold - Technical delivery conditions |
| UNI EN 10277-1 : 2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 303-1:2017 | Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking |
| EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| EN 10245-4:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| EN 303-4:1999 | Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking |
| DIN EN 303-1:2016-07 (Draft) | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| UNE-EN 10294-2:2012 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| BS EN 10253-2:2007 | Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements |
| BS EN 50189:2000 | Conductors for overhead lines. Zinc coated steel wires |
| I.S. EN 10208-1:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| PREN 10263-1 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 15566:2017 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| I.S. EN 10169-3:2003 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS |
| UNE-EN 10245-5:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| PREN 15773 : DRAFT 2016 | INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| DIN EN 10346:2015-10 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| 07/30159083 DC : DRAFT FEB 2007 | BS EN 10106 - COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| 14/30312182 DC : 0 | BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 09/30201486 DC : 0 | BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| PREN 10217-2 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 11/30254171 DC : 0 | BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 08/30189625 DC : 0 | BS EN 10257-1 - ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES |
| BS EN 10217-1:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| 02/704946 DC : DRAFT APR 2002 | PREN 10327 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10088-5:2009 | Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| BS EN 10253-3:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| 08/30188146 DC : 0 | BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| 09/30207505 DC : 0 | BS EN 10217-2 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 01/715452 DC : DRAFT NOV 2001 | PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES |
| DIN EN 10169:2012-06 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012) |
| 10/30227692 DC : 0 | BS EN 10209 - COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| 10/30233309 DC : 0 | BS EN 10255 - NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| 09/30207508 DC : 0 | BS EN 10217-3 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| 04/30117694 DC : DRAFT AUG 2004 | EN 10130 - COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 96/709572 DC : DRAFT JUL 1996 | PREN 10287 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL FUSED POLYETHYLENE BASED COATINGS |
| DIN EN 10209:2013-09 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| 02/713103 DC : DRAFT NOV 2002 | PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| 08/30182457 DC : DRAFT JULY 2008 | BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| 09/30185794 DC : 0 | BS EN 10294-2 - HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS AND NICKEL ALLOYS WITH SPECIFIED MACHINABILITY PROPERTIES |
| 98/712958 DC : DRAFT AUG 1998 | PREN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 15/30324988 DC : 0 | BS EN 10305-6 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 08/30189628 DC : 0 | BS EN 10257-2 - ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES |
| 15/30327671 DC : 0 | BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 05/30135488 DC : DRAFT JUN 2005 | EN 10292 ED 2 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 10238 : DRAFT 2008 | AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
| PREN 10222-2 : DRAFT 2012 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10217-5 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 05/30132598 DC : DRAFT APR 2005 | EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
| PREN 10219-2 : DRAFT 2016 | COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10270-3 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| PREN 10025-1 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| PREN 10223-2 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION AND FENCING PURPOSES |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 10245-5:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| PREN 1559-1 : DRAFT 2009 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 10343:2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions |
| EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| I.S. EN 10253-4:2008 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 10164:2016-04 (Draft) | STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
| 17/30353548 DC : 0 | BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10169 : 2012 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10217-2:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| 16/30332614 DC : 0 | BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| PREN 10338 : DRAFT 2013 | HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 10149-1 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| BS EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions |
| DIN EN 10257-1:2012-02 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
| I.S. EN 10088-4:2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN 10253-3:2008 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10083-3:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| DIN EN 12952-2:2011-10 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| DIN EN 10255:2015-05 (Draft) | Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methods; German and English version prEN 10255:2015 |
| DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| BS EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
| BS EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| BS EN 10223-5:2012 | Steel wire and wire products for fencing and netting Steel wire woven hinged joint and knotted mesh fencing |
| BS EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
| DIN EN 10296-1:2004-02 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| BS EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A |
| UNE-EN 10223-4:2013 | Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing |
| BS EN 10017:2004 | Steel rod for drawing and/or cold rolling. Dimensions and tolerances |
| BS EN 10223-3:2013 | Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes |
| BS EN 10294-1:2005 | Hollow bars for machining. Technical delivery conditions Non alloy and alloy steels |
| UNE-EN 10222-2:2017 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
| BS EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| BS EN 10268 : 2006 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| BS EN 10323:2004 | Steel wire and products. Bead wire |
| BS EN 10245-2:2011 | Steel wire and wire products. Organic coatings on steel wire PVC finished wire |
| UNE-EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| BS EN 10225:2009 | Weldable structural steels for fixed offshore structures. Technical delivery conditions |
| BS EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
| BS EN 10223-6:2012 | Steel wire and wire products for fencing and netting Steel wire chain link fencing |
| BS EN 10240:1998 | Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants |
| BS EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment. Technical delivery conditions General |
| BS EN 10305-4:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 10222-1:2017 | Steel forgings for pressure purposes General requirements for open die forgings |
| BS EN 12952-2:2011 | Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
| BS EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
| BS EN 10028-1:2017 | Flat products made of steels for pressure purposes General requirements |
| BS EN 10151:2002 | Stainless steel strip for springs. Technical delivery conditions |
| BS EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS EN 10277-1:2008 | Bright steel products. Technical delivery conditions General |
| BS EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| BS EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions |
| BS EN 303-1:2017 | Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
| DIN EN 10294-1:2005-12 | Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
| BS EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming. Technical delivery conditions |
| DIN EN 10312:2005-12 | Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005 |
| EN 10087:1998 | Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
| EN 10084:2008 | Case hardening steels - Technical delivery conditions |
| EN 10223-1:2012 | Steel wire and wire products for fencing and netting - Part 1: Zinc and zinc-alloy coated steel barbed wire |
| DIN EN 10323:2004-11 | Steel wire and wire products - Bead wire; German version EN 10323:2004 |
| DIN EN 10336:2007-07 | CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| EN 10270-3:2011 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| EN 10250-2:1999 | Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels |
| EN 10336:2007 | Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming - Technical delivery conditions |
| EN 10106:2015 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| DIN EN 10326:2004-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10255:2007-07 | Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions (includes Amendment A1:2007) |
| DIN EN 10327:2004-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10223-6:2012 | Steel wire and wire products for fencing and netting - Part 6: Steel wire chain link fencing |
| EN 10142 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| ONORM EN 10253-2 : 2008 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| EN 10137-1 : 1995 | PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - GENERAL DELIVERY CONDITIONS |
| EN 10215 : 1995 | CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10296-2:2006-02 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| DIN EN 10264-1:2012-03 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
| EN 10294-2:2012 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| EN 10303:2015 | Thin magnetic steel strip and sheet for use at medium frequencies |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| EN 10343:2009 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| DIN EN 10245-2:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011 |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| EN 10290:2002 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
| EN 10017:2004 | Steel rod for drawing and/or cold rolling - Dimensions and tolerances |
| EN 10341:2006 | Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
| DIN EN 10219-1:2006-07 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| EN 10323:2004 | Steel wire and wire products - Bead wire |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10250-1:1999 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
| EN 10151:2002 | Stainless steel strip for springs - Technical delivery conditions |
| EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| EN 10126 : 1995 | COLD ROLLED ELECTRICAL NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| EN 10089:2002 | Hot-rolled steels for quenched and tempered springs - Technical delivery conditions |
| EN 10154 : 2002 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
| DIN EN 10290:2004-08 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
| DIN EN 10294-2:2012-04 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| EN 10240:1997 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| DIN EN 10305-4:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 10301:2004-01 | Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| DIN EN 10289:2004-08 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
| DIN EN 10111:2008-06 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10108:2005-01 | Round steel rod for cold heading and cold extrusion - Dimensions and tolerances |
| DIN EN 10245-3:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire; German version EN 10245-3:2011 |
| EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| DIN EN 10154:2002-08 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10017:2005-01 | Steel rod for drawing and/or cold rolling - Dimensions and tolerances |
| DIN EN 10341:2006-08 | COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| DIN EN 10162:2003-12 | Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003 |
| UNE-EN 10270-1:2012 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
| EN 10079:2007 | Definition of steel products |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| ISO 31-0:1992 | Quantities and units Part 0: General principles |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 10020:2000 | Definition and classification of grades of steel |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.