EEMUA 207 : 2009
Current
Current
The latest, up-to-date edition.
DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
12-01-2009
US$2,431.44
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
1. Introduction and Scope
2. Qualification
3. Materials
4. Design
5. Construction
6. Inspection and Testing of
the Completed Works
7. Tank Commissioning
8. Operations
9. Maintenance
10. Tank Decommissioning
11. Demolition
12. Definitions and Abbreviations
13. References
14. Bibliography
Gives the engineering contractor with detailed information that will minimise the risk of obtaining varying quotations from tank constructors; it benefits the tank designer by giving them a clear basis for their calculations; and it informs tank construction companies of the quality of testing and examination required for materials, construction methods and tank structure.
| DocumentType |
Standard
|
| ISBN |
9780859311526
|
| Pages |
134
|
| PublisherName |
Engineering Equipment Material Users Association
|
| Status |
Current
|
| 17/30313889 DC : DRAFT AUG 2017 | BS EN ISO 19903 - PETROLEUM AND NATURAL GAS INDUSTRIES - CONCRETE OFFSHORE STRUCTURES |
| EEMUA 147 : 2016 | RECOMMENDATIONS FOR REFRIGERATED LIQUEFIED GAS STORAGE TANKS |
| EN 1998-6:2005 | Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys |
| EN 1097-10:2014 | Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height |
| EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation |
| EN 196-7:2007 | Methods of testing cement - Part 7: Methods of taking and preparing samples of cement |
| BS 8118-2(1991) : 1991 | STRUCTURAL USE OF ALUMINIUM - PART 2: SPECIFICATION FOR MATERIALS, WORKMANSHIP AND PROTECTION |
| ISO 19901-2:2017 | Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria |
| EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
| BS 8118-1:1991 | Structural use of aluminium Code of practice for design |
| ASTM C 518 : 2017 : REDLINE | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| EN 1504-5:2013 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection |
| EN 1504-6:2006 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar |
| EN 62305-4:2011/AC:2016 | PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES (IEC 62305-4:2010) |
| EN 12504-3:2005 | Testing concrete in structures - Part 3: Determination of pull-out force |
| EN 14620-2:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components |
| EN 1504-7:2006 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
| EN 12350-2:2009 | Testing fresh concrete - Part 2: Slump-test |
| EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
| EN 196-5:2011 | Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement |
| EN 12350-6:2009 | Testing fresh concrete - Part 6: Density |
| EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
| API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
| EN 1992-3:2006 | Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures |
| BS 4486:1980 | Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete |
| EN 13263-1:2005+A1:2009 | Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
| EN 13263-2:2005+A1:2009 | Silica fume for concrete - Part 2: Conformity evaluation |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| EN 13391:2004 | Mechanical tests for post-tensioning systems |
| EN 933-3:2012 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
| EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| BS 5958-2:1991 | Code of practice for control of undesirable static electricity Recommendations for particular industrial situations |
| EN 933-6:2014 | Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates |
| ASME B31.3:2016 | PROCESS PIPING |
| ASCE 4 98 : 2000 | SEISMIC ANALYSIS OF SAFETY-RELATED NUCLEAR STRUCTURES AND COMMENTARY |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| EN 933-10:2009 | Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) |
| EN 1367-4:2008 | Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage |
| EN 12350-3:2009 | Testing fresh concrete - Part 3: Vebe test |
| BS 7671(2008) : 2008 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
| EN 1097-3:1998 | Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids |
| BS 5896:1980 | Specification for high tensile steel wire and strand for the prestressing of concrete |
| EN 933-9:2009+A1:2013 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| EN 933-2:1995 | Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures |
| BS 4449(2005) : 2005 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - BAR, COIL AND DECOILED PRODUCT - SPECIFICATION |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EEMUA 159 : 2014 | ABOVE GROUND FLAT BOTTOMED STORAGE TANKS - A GUIDE TO INSPECTION, MAINTENANCE AND REPAIR |
| EN 933-7:1998 | Tests for geometrical properties of aggregates - Part 7: Determination of shell content - Percentage of shells in coarse aggregates |
| EN 1473:2016 | Installation and equipment for liquefied natural gas - Design of onshore installations |
| EN 12504-2:2012 | Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number |
| EN 1090-1:2009+A1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| EN 62305-4:2011/AC:2016-11 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
| EN 14620-5:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 5: Testing, drying, purging and cool-down |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| EN 196-10:2016 | Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement |
| EN 1367-2:2009 | Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test |
| EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
| ASTM C 512 : 2002 | Standard Test Method for Creep of Concrete in Compression |
| EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
| EN 12504-4:2004 | Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
| EN 933-8:2012+A1:2015 | Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test |
| ACI 376 : 2011 | CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES AND COMMENTARY |
| EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| EN 12350-4:2009 | Testing fresh concrete - Part 4: Degree of compactability |
| EN 450 : 1994 | FLY ASH FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND QUALITY CONTROL |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| EN 1160:1996 | Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas |
| EN 62305-2:2012 | Protection against lightning - Part 2: Risk management |
| EEMUA 147 : 2016 | RECOMMENDATIONS FOR REFRIGERATED LIQUEFIED GAS STORAGE TANKS |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 933-4:2008 | Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
| EEMUA 154 : 2002 | DEMOLITION OF VERTICAL CYLINDRICAL STEEL STORAGE TANKS AND LPG SPHERES |
| EN 1097-4:2008 | Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler |
| ASTM A 821/A821M : 2015 : REDLINE | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks |
| EN 14620-4:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 4: Insulation components |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| EN 15167-1:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria |
| ASTM C 520 : 2015 : REDLINE | Standard Test Methods for Density of Granular Loose Fill Insulations |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| EN 447:2007 | Grout for prestressing tendons - Basic requirements |
| EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
| EN 12350-1:2009 | Testing fresh concrete - Part 1: Sampling |
| EN 1504-4:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding |
| EN 1097-7:2008 | Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method |
| EN 1504-1:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
| EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| ENV 13670-1 : DRAFT 2000 | EXECUTION OF CONCRETE STRUCTURES - PART 1 - COMMON |
| EN 12350-7:2009 | Testing fresh concrete - Part 7: Air content - Pressure methods |
| EN 196-8:2010 | Methods of testing cement - Part 8: Heat of hydration - Solution method |
| EN 196-3:2016 | Methods of testing cement - Part 3: Determination of setting times and soundness |
| EN 12504-1:2009 | Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
| EN 196-9:2010 | Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method |
| BS 1881-209:1990 | Testing concrete Recommendations for the measurement of dynamic modulus of elasticity |
| EN 14620-3:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components |
| EN 1998-4:2006 | Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines |
| API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
| EN 14620-1:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 1: General |
| BS 6744(2001) : 2001 | STAINLESS STEEL BARS FOR THE REINFORCEMENT OF AND USE IN CONCRETE - REQUIREMENTS AND TEST METHODS |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| EN 1998-5:2004 | Eurocode 8: Design of structures for earthquake resistance Part 5: Foundations, retaining structures and geotechnical aspects |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.