EEMUA 193 : 2013
Current
Current
The latest, up-to-date edition.
MANAGING COMPETENCE ASSURANCE FOR PERSONNEL UNDERTAKING IN-SERVICE INSPECTION OF PRESSURE EQUIPMENT
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
02-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Abbreviations/Acronyms
1. Introduction and Objectives
2. Use of this EEMUA Publication
3. Structured Approach to Competence Management
4. Identify the Range of Inspection Activities
5. Identify the Competence Required for Each Activity
6. Train and Assess Against the Competence Criteria
7. Authorise Persons for Activities Under Appropriate Supervision
8. Monitor Performance of Persons to Re-assess Competence
Appendix A - Typical Job Titles and Roles
Appendix B - Certification Schemes
Appendix C - Examples from RG0
Appendix D - Country Specific Legislation
Appendix E - Life Expectancy Data
References and Bibliography
Describes the competence both of IBs and the individuals directly or indirectly employed in them is important in ensuring adherence to legislation and its supporting standards, especially in the EU.
| DocumentType |
Standard
|
| Pages |
82
|
| PublisherName |
Engineering Equipment Material Users Association
|
| Status |
Current
|
| BS EN 12953-7:2002 | Shell boilers Requirements for firing systems for liquid and gaseous fuels for the boilers |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| BS EN 286-2:1992 | Simple unfired pressure vessels designed to contain air or nitrogen Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
| BV RG002 : REV 01 | REGULATION APPLICABLE TO UNITS ENGAGED IN SPECIAL SERVICE (ON ONE'S OWN ACCOUNT), WITHOUT DECK, LENGTH UNTILL 10 M |
| BS EN 12953-3:2016 | Shell boilers Design and calculation for pressure parts |
| BS EN 12953-12:2003 | Shell boilers Requirements for grate firing systems for solid fuels for the boiler |
| IMO IG210 : 2008 | INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) CODE SUPPLEMENT |
| EEMUA 206 : 2006 | RISK BASED INSPECTION: A GUIDE TO EFFECTIVE USE OF THE RBI PROCESS |
| API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
| BS EN 286-1 : 1998 | SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES |
| BV RG003 : REV 01 | REGULATION APPLICABLE TO UNITS ENGAGED IN SPECIAL SERVICE (ON ONE'S OWN ACCOUNT), WITHOUT DECK, LENGTH UNTIL 24 M |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| BS EN 286-4:1995 | Simple unfired pressure vessels designed to contain air or nitrogen Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EEMUA 168 : 2010 | GUIDE TO THE PRESSURE TESTING OF IN-SERVICE PRESSURISED EQUIPMENT |
| BS EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| API 573 : 2013 | INSPECTION OF FIRED BOILERS AND HEATERS |
| BS EN 13121-2:2003 | GRP tanks and vessels for use above ground Composite materials. Chemical resistance |
| ASME B31.3:2016 | PROCESS PIPING |
| EEMUA 184 : 2009 | GUIDE TO THE ISOLATION OF PRESSURE RELIEVING DEVICES |
| BV RG001 : REV 02 | REGULATION FOR SHIPS AND NOT SELF PROPELLED CRAFTS HAVING A SEAWORTHINESS CERTIFICATE OR SAFETY NOTES |
| EEMUA 185 : 2011 | GUIDE FOR HOT TAPPING ON PIPING AND OTHER EQUIPMENT |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| BS EN 12953-9:2007 | Shell boilers Requirements for limiting devices of the boiler and accessories |
| API 510 : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| BS EN ISO 4126-2:2003 | Safety devices for protection against excessive pressure Bursting disc safety devices |
| BS 4994:1987 | Specification for design and construction of vessels and tanks in reinforced plastics |
| BS EN 13121-3:2016 | GRP tanks and vessels for use above ground Design and workmanship |
| BS EN 12953-6:2011 | Shell boilers Requirements for equipment for the boiler |
| BV RG006 : REV 00 | REGULATION FOR SURVEYS UNITS AND NOT SELF PROPELLED CRAFTS ENGAGED IN INTERNAL OR LAGOON NAVIGATION |
| EEMUA 159 : 2014 | ABOVE GROUND FLAT BOTTOMED STORAGE TANKS - A GUIDE TO INSPECTION, MAINTENANCE AND REPAIR |
| EEMUA 177 : 2000 | GUIDE TO THE UK PRESSURE SYSTEM SAFETY REGULATIONS (2000) |
| API 579-2 : 2009 | FITNESS-FOR-SERVICE EXAMPLE PROBLEM MANUAL |
| BS EN 12953-11:2003 | Shell boilers Acceptance tests |
| BS EN 13121-1:2003 | GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions |
| API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| ECA ILAC G11 : 2006 | GUIDELINES ON QUALIFICATIONS AND COMPETENCE OF ASSESSORS AND TECHNICAL EXPERTS |
| BS EN 12953-10:2003 | Shell boilers Requirements for feedwater and boiler water quality |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| EEMUA 188 : 2009 | GUIDE FOR ESTABLISHING OPERATING PERIODS OF SAFETY VALVES |
| API 530 : 2015 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| BS EN 12953-1:2012 | Shell boilers General |
| ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
| BS EN 12953-2:2012 | Shell boilers Materials for pressure parts of boilers and accessories |
| BS EN 12953-5:2002 | Shell boilers Inspection during construction, documentation and marking of pressure parts of the boiler |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| BS EN 13121-4:2005 | GRP tanks and vessels for use above ground Delivery, installation and maintenance |
| IMO IF200 : 2006 | INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) CODE |
| BS EN 12874:2001 | Flame arresters. Performance requirements, test methods and limits for use |
| API 570 : 2016 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
| BS EN 286-3:1995 | Simple unfired pressure vessels designed to contain air or nitrogen Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| API 579-1 : 2016 | FITNESS-FOR-SERVICE |
| BV RG005 : REV 00 | REGULATION FOR STABILITY ON ITALIAN VESSELS NOT SUBJECT TO INTERNATIONAL CONVENTIONS AND NOT CLASSED |
| BS EN 12953-13:2012 | Shell boilers Operating instructions |
| BS EN 45004:1995 | General criteria for the operation of various types of bodies performing inspection |
| BS 7244:1990 | Specification for flame arresters for general use |
| BS EN 12953-4:2002 | Shell boilers Workmanship and construction of pressure parts of the boiler |
| API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
| BV RG004 : REV 00 | REGULATION FOR LOADING AND UNLOADING DEVICES AND FOR OTHER LIFTING GEARS ON BOARD ITALIAN VESSELS |
| BS EN ISO 4126-1 : 2013 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES (ISO 4126-1:2013) |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| BS EN 12953-8:2001 | Shell boilers Requirements for safeguards against excessive pressure |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.