DIN ISO 5725-2:2002-12
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002)
Available format(s)
Hardcopy , PDF
Superseded date
04-26-2022
Superseded by
Language(s)
German, German - English
Published date
12-01-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.This standard is included in DIN Handbook 118/3, 224 and 355.
| DevelopmentNote |
Supersedes DIN ISO 5725. (12/2002) The 2020 draft version has release for the standard DIN ISO 5725-2
|
| DocumentType |
Standard
|
| Pages |
97
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 5725-2:1994 | Identical |
| DIN EN 16199:2013-01 | FERTILIZERS - DETERMINATION OF THE SODIUM EXTRACTED BY FLAME-EMISSION SPECTROMETRY |
| DIN EN 15980:2011-08 | Air quality - Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene |
| DIN EN ISO 18635:2016-10 | WATER QUALITY - DETERMINATION OF SHORT-CHAIN POLYCHLORINATED ALKANES (SCCPS) IN SEDIMENT, SEWAGE SLUDGE AND SUSPENDED (PARTICULATE) MATTER - METHOD USING GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) AND ELECTRON CAPTURE NEGATIVE IONIZATION (ECNI) (ISO 18635:2016) |
| DIN EN 16694:2015-12 | WATER QUALITY - DETERMINATION OF SELECTED POLYBROMINATED DIPHENLY ETHER (PBDE) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
| DIN EN ISO 12873:2014-07 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF WAX CONTENT BY CAPILLARY GAS CHROMATOGRAPHY (ISO 12873:2010) |
| DIN HDBK 118/3 : 3ED 2008 | PAPIER, PAPPE UND FASERSTOFF 3 - DIN EN 643 BIS DIN EN 15519 SOWIE DIN ISO 1924-3 BIS DIN ISO 13542 |
| DIN EN ISO 5536:2013-08 | Milk fat products - Determination of water content - Karl Fischer method (ISO 5536:2009) |
| DIN EN 15297:2011-04 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| DIN EN ISO 12999-1 E : 2014 | ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION (ISO 12999-1:2014) |
| DIN EN ISO 15216-1:2015-09 (Draft) | MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR DETERMINATION OF HEPATITIS A VIRUS AND NOROVIRUS USING REAL-TIME RT-PCR - PART 1: METHOD FOR QUANTIFICATION (ISO 15216-1:2017) |
| DIN EN 15411:2011-11 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
| DIN EN 15022-4:2012-01 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN ISO 13196:2015-11 | SOIL QUALITY - SCREENING SOILS FOR SELECTED ELEMENTS BY ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY USING A HANDHELD OR PORTABLE INSTRUMENT (ISO 13196:2013) |
| DIN EN ISO 11701:2010-04 | Vegetable fats and oils - Determination of phospholipids content in lecithins by HPLC using a light-scattering detector (ISO 11701:2009) |
| DIN EN 16318:2016-07 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CHROMIUM(6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
| DIN EN 15605:2010-12 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| DIN ISO 15923-1:2014-07 | WATER QUALITY - DETERMINATION OF SELECTED PARAMETERS BY DISCRETE ANALYSIS SYSTEMS - PART 1: AMMONIUM, NITRATE, NITRITE, CHLORIDE, ORTHOPHOSPHATE, SULFATE AND SILICATE WITH PHOTOMETRIC DETECTION (ISO 15923-1:2013) |
| DIN EN 16198:2013-01 | FERTILIZERS - DETERMINATION OF MAGNESIUM BY COMPLEXOMETRY |
| DIN EN 15991:2016-02 | TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV) |
| DIN EN 16691:2015-12 | WATER QUALITY - DETERMINATION OF SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
| DIN EN ISO 18854:2015-08 | SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015) |
| DIN EN 16693:2015-12 | WATER QUALITY - DETERMINATION OF ORGANOCHLORINE PESTICIDES (OCP) IN WHOLE WATER SAMPLES - METHOD USING SOLID PHASE EXTRACTION (SPE) WITH SPE-DISKS COMBINED WITH GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
| DIN EN ISO 13199:2013-02 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOCS) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED ANALYSER EQUIPPED WITH CATALYTIC CONVERTER (ISO 13199:2012) |
| DIN EN ISO 13906:2008-11 | ANIMAL FEEDING STUFFS - DETERMINATION OF ACID DETERGENT FIBRE (ADF) AND ACID DETERGENT LIGNIN (ADL) CONTENTS |
| DIN EN 15853:2010-11 | Ambient air quality - Standard method for the determination of mercury deposition |
| DIN EN 15616:2013-02 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN EN 15842:2010-06 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| DIN EN 15608:2008-08 | SURFACE ACTIVE AGENTS - QUANTITATIVE DETERMINATION OF FREE FATTY ACID IN ALKYLAMIDOPROPYLBETAINES - GAS-CHROMATOGRAPHIC METHOD |
| DIN EN ISO 12999-1:2014-09 | Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
| DIN EN ISO 17852:2008-04 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC FLUORESCENCE SPECTROMETRY |
| DIN ISO 15923-1 E : 2014 | WATER QUALITY - DETERMINATION OF SELECTED PARAMETERS BY DISCRETE ANALYSIS SYSTEMS - PART 1: AMMONIUM, NITRATE, NITRITE, CHLORIDE, ORTHOPHOSPHATE, SULFATE AND SILICATE WITH PHOTOMETRIC DETECTION (ISO 15923-1:2013) |
| DIN EN ISO 16995:2015-05 | SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT (ISO 16995:2015) |
| DIN EN 16847:2016-05 | FERTILIZERS - DETERMINATION OF COMPLEXING AGENTS IN FERTILIZERS - IDENTIFICATION OF HEPTAGLUCONIC ACID BY CHROMATOGRAPHY |
| DIN EN 16858:2015-05 (Draft) | FOODSTUFFS - DETERMINATION OF MELAMINE AND CYANURIC ACID IN FOODSTUFFS BY LIQUID CHROMATOGRAPHY AND TANDEM MASS SPECTROMETRY (LC-MS/MS) |
| DIN EN 16328:2013-02 | Fertilizers - Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP) - Method using high-performance liquid chromatography (HPLC) |
| DIN 10482-1:2005-04 | Determination of the annatto content of cheese - Part 1: Photometric method (includes DIN 10482-1:2005-05 Corrigendum 1) |
| DIN 51724-1:2012-07 | TESTING OF SOLID FUELS - DETERMINATION OF SULFUR CONTENT - PART 1: TOTAL SULFUR |
| DIN EN ISO 16634-1:2009-07 | FOOD PRODUCTS - DETERMINATION OF THE TOTAL NITROGEN CONTENT BY COMBUSTION ACCORDING TO THE DUMAS PRINCIPLE AND CALCULATION OF THE CRUDE PROTEIN CONTENT - PART 1: OILSEEDS AND ANIMAL FEEDING STUFFS |
| DIN EN ISO 21068-2:2008-12 | Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon (ISO 21068-2:2008) |
| DIN HDBK 355 : 1ED 2004 | |
| DIN EN 16167:2012-11 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF POLYCHLORINATED BIPHENYLS (PCB) BY GAS CHROMATOGRAPHY WITH MASS SELECTIVE DETECTION (GC-MS) AND GAS CHROMATOGRAPHY WITH ELECTRON-CAPTURE DETECTION (GC-ECD) |
| DIN EN ISO 20227:2016-06 (Draft) | WATER QUALITY - DETERMINATION OF THE GROWTH INHIBITION EFFECTS OF WASTE WATERS, NATURAL WATERS AND CHEMICALS ON THE DUCKWEED SPIRODELA POLYRHIZA - METHOD USING A STOCK CULTURE INDEPENDENT MICROBIOTEST (ISO 20227:2017) |
| DIN EN ISO 11819-2:2015-11 (Draft) | ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 2: THE CLOSE-PROXIMITY METHOD (ISO 11819-2:2017) |
| DIN EN 16845-1:2015-05 (Draft) | PHOTOCATALYSIS - ANTI-SOILING CHEMICAL ACTIVITY USING ADSORBED ORGANICS UNDER SOLID/SOLID CONDITIONS - PART 1: DYES ON POROUS SURFACES |
| DIN EN 15024-2:2007-01 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| DIN EN ISO 11890-2:2013-07 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| DIN EN ISO 17294-1:2007-02 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
| DIN EN 13587:2010-10 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| DIN EN ISO 17932:2011-12 | Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) |
| DIN EN 12582:1999-05 | SURFACE ACTIVE AGENTS - DETERMINATION OF THE POLYETHYLENE GLYCOL CONTENT ACCORDING TO MOLAR MASS IN NON-IONIC SURFACE ACTIVE AGENTS (ETHOXYLATED) BY HPLC/ELSD |
| DIN EN ISO 1211:2010-11 | Milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1211:2010) |
| DIN EN 14185-2:2006-08 | Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column |
| DIN EN 13040:2008-01 | Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| DIN EN ISO 11609:2016-07 (Draft) | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017) |
| DIN EN 15863:2015-06 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED CONDITIONS |
| DIN EN 12506:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CI[-], CO, CR, CR(VI), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN |
| DIN EN ISO 662:2016-08 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT (ISO 662:2016) |
| DIN EN 15950:2010-12 | Fertilizers - Determination of N-(1,2-dicarboxyethyl)-D,L-aspartic acid (Iminodisuccinic acid, IDHA) using high-performance liquid chromatography (HPLC) |
| DIN EN 15915:2010-12 | Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 868-2:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| DIN EN 15549:2008-06 | Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air |
| DIN EN ISO 13366-2:2007-01 | Milk - Enumeration of somatic cells - Part 2: Guidance on the operation of fluoro-opto-electronic counters (ISO 13366-2:2006) |
| DIN EN ISO 734-1:2001-02 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 1: EXTRACTION METHOD WITH HEXANE (OR LIGHT PETROLEUM) |
| DIN EN ISO 734-2:2010-08 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 2: RAPID EXTRACTION METHOD |
| DIN EN 14701-2:2013-07 | Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration |
| DIN EN ISO 734-1:2007-02 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 1: EXTRACTION METHOD WITH HEXANE (OR LIGHT PETROLEUM) |
| DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| DIN EN 16877:2017-03 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF T-2 AND HT-2 TOXINS, DEOXYNIVALENOL AND ZEARALENONE, IN FEED MATERIALS AND COMPOUND FEED BY LC-MS |
| DIN EN 15168:2007-02 | Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide |
| DIN EN ISO 665:2001-02 | OILSEEDS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT |
| DIN EN ISO 8968-4:2016-09 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 4: DETERMINATION OF PROTEIN AND NON-PROTEIN NITROGEN CONTENT AND TRUE PROTEIN CONTENT CALCULATION (REFERENCE METHOD) (ISO 8968-4:2016) |
| DIN EN 15948:2015-06 | CEREALS - DETERMINATION OF MOISTURE AND PROTEIN - METHOD USING NEAR-INFRARED-SPECTROSCOPY IN WHOLE KERNELS |
| DIN EN 15909:2010-11 | Fertilizers - Determination of calcium and formate in calcium foliar fertilizers |
| DIN EN 15905:2010-11 | Fertilizers - Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC) |
| DIN EN ISO 3656:2017-08 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ULTRAVIOLET ABSORBANCE EXPRESSED AS SPECIFIC UV EXTINCTION (ISO 3656:2011 + AMD 1:2017) |
| DIN EN 14939:2006-09 | Copper and copper alloys - Determination of beryllium content - FAAS method |
| DIN EN 14789:2017-05 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| DIN EN 14880:2005-11 | Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method; German version EN 14880:2005 |
| DIN EN 16317:2017-05 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| DIN ISO 10390:1997-05 | SOIL QUALITY - DETERMINATION OF PH |
| DIN EN ISO 15302:2017-07 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF BENZO[A]PYRENE - REVERSE-PHASE HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD (ISO 15302:2017) |
| DIN EN ISO 16140:2003-09 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS (ISO 16140:2003 + AMD.1:2011) |
| DIN ISO 11264:2005-11 | SOIL QUALITY - DETERMINATION OF HERBICIDES - METHOD USING HPLC WITH UV-DETECTION |
| DIN EN 868-4:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 4: PAPER BAGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 15935:2012-11 | Sludge, treated biowaste, soil and waste - Determination of loss on ignition; German version EN 15935:2012 |
| DIN EN ISO 5943:2007-01 | CHEESE AND PROCESSED CHEESE PRODUCTS - DETERMINATION OF CHLORIDE CONTENT - POTENTIOMETRIC TITRATION METHOD |
| DIN EN ISO 15025:2017-04 | PROTECTIVE CLOTHING - PROTECTION AGAINST FLAME - METHOD OF TEST FOR LIMITED FLAME SPREAD (ISO 15025:2016) |
| DIN EN ISO 16140:2011-12 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS (ISO 16140:2003 + AMD.1:2011) |
| DIN EN 14941:2006-09 | Copper and copper alloys - Determination of cobalt content - FAAS method |
| DIN EN 15936:2012-11 | Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion |
| DIN EN 15054:2006-08 | Non fatty foods - Determination of chlormequat and mepiquat - LC-MS method |
| VDI 3475 Blatt 2:2005-12 | Emission control - Facilities for biological waste - Composting an anaerobic (co-)digestion - Plant capacities up to approx. 6000 Mg/a |
| DIN EN ISO 16373-3 E : 2014 | TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARCINOGENIC DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) (ISO 16373-3:2014) |
| DIN EN ISO 25139:2011-08 | Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011) |
| DIN ISO 11349:2015-12 | WATER QUALITY - DETERMINATION OF LOW-VOLATILITY LIPOPHILIC SUBSTANCES - GRAVIMETRIC METHOD (ISO 11349:2010) |
| DIN EN 16196:2013-01 | FERTILIZERS - MANGANIMETRIC DETERMINATION OF EXTRACTED CALCIUM FOLLOWING PRECIPITATION IN THE FORM OF OXALATE |
| DIN EN ISO 11085:2016-02 | CEREALS, CEREALS-BASED PRODUCTS AND ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT AND TOTAL FAT CONTENT BY THE RANDALL EXTRACTION METHOD (ISO 11085:2015) |
| DIN EN 16995 E : 2017 | FOODSTUFFS - VEGETABLE OILS AND FOODSTUFF ON BASIS OF VEGETABLE OILS - DETERMINATION OF MINERAL OIL SATURATED HYDROCARBONS (MOSH) AND MINERAL OIL AROMATIC HYDROCARBONS (MOAH) WITH ON-LINE HPLC-GC-FID ANALYSIS |
| DIN EN ISO 14720-2:2013-06 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW (ISO 14720-2:2013) |
| DIN EN ISO 17059:2009-11 | OILSEEDS - EXTRACTION OF OIL AND PREPARATION OF METHYL ESTERS OF TRIGLYCERIDE FATTY ACIDS FOR ANALYSIS BY GAS CHROMATOGRAPHY (RAPID METHOD) |
| DIN EN ISO 1833-22:2013-07 | Textiles - Quantitative chemical analysis - Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride) (ISO 1833-22:2013) |
| DIN ISO 362-2:2010-05 | Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category (ISO 362-2:2009) |
| DIN EN 15916-2:2010-12 | Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN ISO 6883 E : 2017 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CONVENTIONAL MASS PER VOLUME (LITRE WEIGHT IN AIR) (ISO 6883:2017) |
| DIN EN 14997:2015-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
| DIN EN ISO 12846:2012-08 | Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012) |
| DIN EN 15410:2011-11 | Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
| DIN ISO 17713-1:2007-10 | METEOROLOGY - WIND MEASUREMENTS - PART 1: WIND TUNNEL TEST METHODS FOR ROTATING ANEMOMETER PERFORMANCE |
| DIN EN ISO 17072-1:2011-06 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
| DIN EN ISO 12228-1:2014-10 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS (ISO 12228-1:2014) |
| DIN 53579:2015-04 | TESTING OF FLEXIBLE CELLULAR MATERIALS - INDENTATION TEST ON FINISHED PARTS |
| DIN EN 15267-4:2015-08 (Draft) | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES |
| DIN EN ISO 18635 E : 2016 | WATER QUALITY - DETERMINATION OF SHORT-CHAIN POLYCHLORINATED ALKANES (SCCPS) IN SEDIMENT, SEWAGE SLUDGE AND SUSPENDED (PARTICULATE) MATTER - METHOD USING GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) AND ELECTRON CAPTURE NEGATIVE IONIZATION (ECNI) (ISO 18635:2016) |
| DIN EN 15781:2009-11 | Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation |
| DIN EN 15841:2010-04 | Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition |
| DIN EN 15025:2010-12 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) |
| DIN ISO 19730:2009-07 | SOIL QUALITY - EXTRACTION OF TRACE ELEMENTS FROM SOIL USING AMMONIUM NITRATE SOLUTION |
| DIN EN ISO 13517:2013-08 | METALLIC POWDERS - DETERMINATION OF FLOWRATE BY MEANS OF A CALIBRATED FUNNEL (GUSTAVSSON FLOWMETER) (ISO 13517:2013) |
| DIN EN 16801:2016-07 | FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - DETERMINATION OF METHYLMERCURY IN FOODSTUFFS OF MARINE ORIGIN BY ISOTOPE DILUTION GC-ICP-MS |
| DIN EN ISO 12228-1 E : 2014 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS (ISO 12228-1:2014) |
| DIN EN 14793:2017-05 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| DIN EN 16651:2015-07 | FERTILIZERS - DETERMINATION OF N-(N-BUTYL)THIOPHOSPHORIC ACID TRIAMIDE (NBPT) AND N-(N-PROPYL)THIOPHOSPHORIC ACID TRIAMIDE (NPPT) - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| DIN EN ISO 16014-5:2012-10 | PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012) |
| DIN EN ISO 15351:2010-08 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
| DIN EN 16117-1:2011-12 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % |
| DIN EN 16319:2016-03 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| DIN EN 16024:2011-06 | Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
| DIN EN ISO 8534:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD (PYRIDINE FREE) (ISO 8534:2017) |
| DIN EN 14397-1:2010-07 | Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers |
| DIN EN ISO 17072-2:2011-06 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
| DIN EN 16109:2012-01 | Fertilizers - Determination of complexed micro-nutrient ions in fertilizers - Identification of lignosulfonates |
| DIN EN ISO 23161:2011-10 | SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD (ISO 23161:2009) |
| DIN EN ISO 27107:2010-08 | Animal and vegetable fats and oils - Determination of peroxide value - Potentiometric end-point determination (ISO 27107:2008, corrected version 2009-05-15) |
| DIN 55957:2016-08 | BINDERS FOR PAINTS AND VARNISHES - METHYLATION AND SILYLATION OF FATTY ACIDS AND ANALYSIS BY GAS CHROMATOGRAPHY |
| DIN EN 15690-2:2009-07 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| DIN EN ISO 21528-2:2017-09 | MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR THE DETECTION AND ENUMERATION OF ENTEROBACTERIACEAE - PART 2: COLONY-COUNT TECHNIQUE (ISO 21528-2:2017) |
| DIN EN 1606:2013-05 | Thermal insulating products for building applications - Determination of compressive creep |
| DIN EN 1609:2013-05 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF SHORT TERM WATER ABSORPTION BY PARTIAL IMMERSION |
| DIN EN ISO 11816-1:2014-03 | Milk and milk products - Determination of alkaline phosphatase activity - Part 1: Fluorimetric method for milk and milk-based drinks (ISO 11816-1:2013) |
| DIN EN ISO 6885:2016-07 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ANISIDINE VALUE (ISO 6885:2016) |
| DIN EN ISO 5659-2:2016-02 (Draft) | PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017) |
| DIN EN 1603:2013-05 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF DIMENSIONAL STABILITY UNDER CONSTANT NORMAL LABORATORY CONDITIONS (23 DEGREES C/50% RELATIVE HUMIDITY) |
| DIN EN 1604:2013-05 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF DIMENSIONAL STABILITY UNDER SPECIFIED TEMPERATURE AND HUMIDITY CONDITIONS |
| DIN EN ISO 17353:2005-11 | Water quality - Determination of selected organotin compounds - Gas chromatographic method (ISO 17353:2004) |
| DIN EN ISO 22160:2007-08 | MILK AND MILK-BASED DRINKS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - ENZYMATIC PHOTO-ACTIVATED SYSTEM (EPAS) METHOD |
| DIN EN 1605:2013-05 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF DEFORMATION UNDER SPECIFIED COMPRESSIVE LOAD AND TEMPERATURE CONDITIONS |
| DIN EN 1607:2013-05 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PERPENDICULAR TO FACES |
| DIN EN 15267-3:2008-03 | Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources |
| DIN EN ISO 8968-1:2014-06 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 1: KJELDAHL PRINCIPLE AND CRUDE PROTEIN CALCULATION (ISO 8968-1:2014) |
| DIN EN ISO 6320:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF REFRACTIVE INDEX (ISO 6320:2017) |
| DIN EN 12087:2013-06 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF LONG TERM WATER ABSORPTION BY IMMERSION |
| DIN EN 14789:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| DIN EN ISO 20483:2014-03 | CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD (ISO 20483:2013) |
| DIN EN 14385:2004-05 | Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V |
| DIN EN ISO 20743:2013-12 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| DIN EN ISO 4589-2:2016-03 (Draft) | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
| DIN EN ISO 10723:2013-04 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| DIN EN 13370:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, CN[-] EASILY LIBERATABLE, F[-] |
| DIN EN 13587:2017-02 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| DIN EN 12485:2017-10 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS |
| DIN EN ISO 15216-1:2017-07 | Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification (ISO 15216-1:2017) |
| DIN EN 16858:2017-08 | Foodstuffs - Determination of melamine and cyanuric acid in foodstuffs by liquid chromatography and tandem mass spectrometry (LC-MS/MS) |
| DIN EN ISO 6647-2:2015-09 | RICE - DETERMINATION OF AMYLOSE CONTENT - PART 2: ROUTINE METHODS (ISO 6647-2:2015) |
| DIN EN 28510-1:2014-07 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| DIN ISO 17380:2006-05 | SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE AND EASILY RELEASED CYANIDE - CONTINUOUS-FLOW ANALYSIS METHOD |
| DIN ISO 16772:2005-06 | Soil quality - Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry (ISO 16772:2004) |
| DIN EN ISO 8968-3:2007-09 | Milk - Determination of nitrogen content - Part 3: Block-digestion method (Semi-micro rapid routine method) (ISO 8968-3:2004) |
| DIN EN ISO 13366-1:2008-06 | MILK - ENUMERATION OF SOMATIC CELLS - PART 1: MICROSCOPIC METHOD (REFERENCE METHOD) |
| DIN 53504:2009-10 | TESTING OF RUBBER - DETERMINATION OF TENSILE STRENGTH AT BREAK, TENSILE STRESS AT YIELD, ELONGATION AT BREAK AND STRESS VALUES IN A TENSILE TEST |
| DIN EN ISO 6647-1:2015-09 | RICE - DETERMINATION OF AMYLOSE CONTENT - PART 1: REFERENCE METHOD (ISO 6647-1:2015) |
| DIN EN ISO 7235:2010-01 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| VDI 3862 Blatt 3:2000-12 | Gaseous emission measurement - Measurement of aliphatic and aromatic aldehydes and ketones by DNPH method - Cartridges method |
| VDI 2066 Blatt 1:1975-10 | Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals |
| VDI 3862 Blatt 2:2000-12 | Gaseous emission measurement - Measurement of aliphatic and aromatic aldeydes and ketones by DNPH method - Impinger method |
| VDI 3478 Blatt 2:2008-04 | Biological waste gas purification - Biological trickle bed-reactors |
| VDI 3478 Blatt 1:2011-03 | Biological waste gas purification - Bioscrubbers |
| DIN EN 16995:2017-08 | Foodstuffs - Vegetable oils and foodstuff on basis of vegetable oils - Determination of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) with on-line HPLC-GC-FID analysis |
| DIN ISO 16308:2013-04 (Draft) | WATER QUALITY - DETERMINATION OF GLYPHOSATE AND AMPA - METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) WITH TANDEM MASS SPECTROMETRIC DETECTION (ISO 16308:2014) |
| DIN EN 16160:2012-05 | Animal feeding stuffs - Determination of Hydrocyanic acid by HPLC |
| DIN EN 12350-12:2010-12 | Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test |
| DIN ISO 14502-1:2007-11 | DETERMINATION OF SUBSTANCES CHARACTERISTIC OF GREEN AND BLACK TEA - PART 1: CONTENT OF TOTAL POLYPHENOLS IN TEA - COLORIMETRIC METHOD USING FOLIN-CIOCALTEU REAGENT |
| DIN EN ISO 14389:2014-10 | Textiles - Determination of the phthalate content - Tetrahydrofuran method (ISO 14389:2014) |
| DIN EN ISO 16373-3:2014-10 | TEXTILES - DYESTUFFS - PART 3: METHOD FOR DETERMINATION OF CERTAIN CARCINOGENIC DYESTUFFS (METHOD USING TRIETHYLAMINE/METHANOL) (ISO 16373-3:2014) |
| DIN ISO 20481:2011-01 | Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method (ISO 20481:2008) |
| DIN EN 15705:2010-07 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylene-urea oligomers (method B); German version EN 15705:2010 |
| DIN EN 16192:2012-02 | Characterization of waste - Analysis of eluates |
| DIN EN 15764:2010-04 | Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion |
| DIN ISO 11916-2:2014-11 | SOIL QUALITY - DETERMINATION OF SELECTED EXPLOSIVES AND RELATED COMPOUNDS - PART 2: METHOD USING GAS CHROMATOGRAPHY (GC) WITH ELECTRON CAPTURE DETECTION (ECD) OR MASS SPECTROMETRIC DETECTION (MS) (ISO 11916-2:2013) |
| DIN ISO 14154:2005-12 | Soil quality - Determination of some selected chlorophenols - Gas-chromatographic method with electron-capture detection (ISO 14154:2005) |
| DIN EN 15428:2007-11 | Soil improvers and growing media - Determination of particle size distribution |
| DIN EN ISO 17184:2014-09 | SOIL QUALITY - DETERMINATION OF CARBON AND NITROGEN BY NEAR-INFRARED SPECTROMETRY (NIRS) (ISO 17184:2014) |
| DIN EN ISO 14389 E : 2014 | TEXTILES - DETERMINATION OF THE PHTHALATE CONTENT - TETRAHYDROFURAN METHOD (ISO 14389:2014) |
| DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| DIN ISO 11916-1:2014-11 | SOIL QUALITY - DETERMINATION OF SELECTED EXPLOSIVES AND RELATED COMPOUNDS - PART 1: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) WITH ULTRAVIOLET DETECTION (ISO 11916-1:2013) |
| DIN EN ISO 29822:2014-07 | VEGETABLE FATS AND OILS - ISOMERIC DIACYLGLYCEROLS - DETERMINATION OF RELATIVE AMOUNTS OF 1,2- AND 1,3-DIACYLGLYCEROLS (ISO 29822:2009) |
| DIN EN 16317:2013-12 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| DIN EN ISO 20541:2008-12 | MILK AND MILK PRODUCTS - DETERMINATION OF NITRATE CONTENT - METHOD BY ENZYMATIC REDUCTION AND MOLECULAR-ABSORPTION SPECTROMETRY AFTER GRIESS REACTION |
| DIN ISO 22935-3:2012-12 | Milk and milk products - Sensory analysis - Part 3: Guidance on a method for evaluation of compliance with product specifications for sensory properties by scoring (ISO 22935-3:2009) |
| DIN EN 15647:2009-04 | SURFACE ACTIVE AGENTS - DETERMINATION OF THE DISPERSING EFFECT OF SURFACTANTS ON POWDER |
| DIN EN ISO 16265:2012-05 | Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA) (ISO 16265:2009) |
| DIN EN 15451:2008-11 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY EDDHSA BY ION PAIR CHROMATOGRAPHY |
| DIN EN 15761:2010-04 | Pre-shaped growing media - Determination of length, width, height, volume and bulk density |
| DIN EN 16075:2012-01 | Fertilizers - Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatographie (HPLC) |
| DIN EN 15305:2009-01 | NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| DIN EN ISO 14720-1:2013-06 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS (ISO 14720-1:2013) |
| DIN EN 16858 E : 2017 | FOODSTUFFS - DETERMINATION OF MELAMINE AND CYANURIC ACID IN FOODSTUFFS BY LIQUID CHROMATOGRAPHY AND TANDEM MASS SPECTROMETRY (LC-MS/MS) |
| DIN ISO 16055:2015-12 | Tobacco and tobacco products - Monitor test piece - Requirements and use (ISO 16055:2012) |
| DIN EN 15104:2011-04 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| DIN 10785:2013-06 | ANALYSIS OF COFFEE AND COFFEE PRODUCTS - DETERMINATION OF ACRYLAMIDE - METHODS USING HPLC-MS/MS AND GC-MS AFTER DERIVATIZATION |
| DIN EN 16173:2012-11 | SLUDGE, TREATED BIOWASTE AND SOIL - DIGESTION OF NITRIC ACID SOLUBLE FRACTIONS OF ELEMENTS |
| DIN EN ISO 17678:2010-06 | MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
| DIN EN 16877:2015-07 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF T-2 AND HT-2 TOXINS, DEOXYNIVALENOL AND ZEARALENONE, IN FEED MATERIALS AND COMPOUND FEED BY LC-MS |
| DIN EN 13037:2012-01 | Soil improvers and growing media - Determination of pH |
| DIN EN 13041:2012-01 | Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space |
| DIN EN 13039:2012-01 | Soil improvers and growing media - Determination of organic matter content and ash |
| DIN EN 12441-11:2006-10 | Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method |
| DIN EN ISO 16931:2009-08 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF POLYMERIZED TRIACYLGLYCEROLS BY HIGH-PERFORMANCE SIZE-EXCLUSION CHROMATOGRAPHY (HPSEC) |
| DIN EN 12430:2013-05 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF BEHAVIOUR UNDER POINT LOAD |
| DIN EN ISO 13468-2:2006-07 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
| DIN EN 1608:2013-05 | Thermal insulating products for building applications - Determination of tensile strength parallel to faces |
| DIN EN ISO 6926:2016-08 | Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
| DIN EN ISO 3657:2013-12 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SAPONIFICATION VALUE (ISO 3657:2013) |
| DIN EN 1097-1:2011-04 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
| DIN EN ISO 5764:2009-10 | Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009) |
| DIN EN ISO 11890-1:2007-09 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| DIN EN 15022-3:2006-12 | Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) |
| DIN EN ISO 2178:2015-01 (Draft) | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| DIN EN 901:2013-12 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HYPOCHLORITE |
| DIN EN ISO 15302:2010-08 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF BENZO[A]PYRENE - REVERSE-PHASE HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD (ISO 15302:2017) |
| DIN EN 14602:2012-10 | Footwear - Test methods for the assessment of ecological criteria |
| DIN EN 12089:2013-06 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF BENDING BEHAVIOUR |
| DIN EN 14792:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
| DIN EN 14791:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
| DIN EN 14984:2016-10 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
| DIN EN ISO 8292-1:2010-08 | Animal and vegetable fats and oils - Determination of solid fat content by pulsed NMR - Part 1: Direct method (ISO 8292-1:2008) |
| DIN EN ISO 16968:2015-09 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS (ISO 16968:2015) |
| DIN EN 15296:2011-04 | SOLID BIOFUELS - CONVERSION OF ANALYTICAL RESULTS FROM ONE BASIS TO ANOTHER |
| DIN ISO 10390 E : 1997 | SOIL QUALITY - DETERMINATION OF PH |
| DIN EN ISO 14403-1:2012-10 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA); (ISO 14403-1:2012) |
| DIN EN 14405:2017-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| DIN ISO 15592-1:2005-05 | Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 1: Sampling (ISO 15592-1:2001) |
| DIN EN ISO 8292-2:2010-08 | Animal and vegetable fats and oils - Determination of solid fat content by pulsed NMR - Part 2: Indirect method (ISO 8292-2:2008) |
| DIN EN ISO 2171:2010-08 | Cereals, pulses and by-products - Determination of ash yield by incineration (ISO 2171:2007) |
| DIN EN ISO 14644-9:2012-12 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
| DIN EN ISO 12779:2013-08 | Lactose - Determination of water content - Karl Fischer method (ISO 12779:2011) |
| DIN EN 15105:2011-04 | SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT |
| DIN EN ISO 12404:2015-11 | Soil quality - Guidance on the selection and application of screening methods (ISO 12404:2011) |
| DIN EN ISO 15194:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| DIN ISO 20280:2010-05 | Soil quality - Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry (ISO 20280:2007) |
| DIN EN 16197:2013-01 | Fertilizers - Determination of magnesium by atomic absorption spectrometry |
| DIN ISO 22036:2009-06 | Soil quality - Determination of trace elements in extracts of soil by inductively coupled plasma - atomic emission spectrometry (ICP-AES) (ISO 22036:2008) |
| DIN ISO 10390:2005-12 | SOIL QUALITY - DETERMINATION OF PH |
| DIN EN ISO 19739:2009-08 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY |
| DIN ISO 20193:2015-06 | Tobacco and tobacco products - Determination of the width of the strands of cut tobacco (ISO 20193:2012) |
| DIN ISO 4649:2014-03 | Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010) |
| DIN EN ISO 11206:2013-05 | Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011); German version EN ISO 11206:2013 |
| DIN EN 15622:2010-06 | Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 16169:2012-11 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF KJELDAHL NITROGEN |
| DIN EN 15607:2009-09 | Foodstuffs - Determination of d-biotin by HPLC |
| DIN EN 16195:2013-01 | FERTILIZERS - DETERMINATION OF CHLORIDES IN THE ABSENCE OF ORGANIC MATERIAL |
| DIN EN 15765:2010-04 | Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion |
| DIN EN ISO 11876:2010-12 | Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) |
| DIN EN ISO 16198:2015-04 | SOIL QUALITY - PLANT-BASED TEST TO ASSESS THE ENVIRONMENTAL BIOAVAILABILITY OF TRACE ELEMENTS TO PLANTS (ISO 16198:2015) |
| DIN ISO 20279:2006-01 | Soil quality - Extraction of thallium and determination by electrothermal atomic absorption spectrometry (ISO 20279:2005) |
| DIN EN 14429:2015-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
| DIN EN 16802:2016-07 | FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - DETERMINATION OF INORGANIC ARSENIC IN FOODSTUFFS OF MARINE AND PLANT ORIGIN BY ANION-EXCHANGE HPLC-ICP-MS |
| DIN EN ISO 3960:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PEROXIDE VALUE - IODOMETRIC (VISUAL) ENDPOINT DETERMINATION (ISO 3960:2017) |
| DIN EN 15452:2008-11 | FERTILIZERS - DETERMINATION OF CHELATING AGENTS - DETERMINATION OF IRON CHELATED BY O,P-EDDHA BY REVERSED PHASE HPLC |
| DIN EN 15289:2011-04 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| DIN EN 15290:2011-04 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI |
| DIN EN 16852:2015-04 (Draft) | FOODSTUFFS - DETERMINATION OF ETHYL CARBAMATE IN STONE FRUIT SPIRITS, FRUIT MARC SPIRITS AND OTHER SPIRIT DRINKS - GC-MS METHOD |
| DIN ISO 2971:2015-12 | CIGARETTES AND FILTER RODS - DETERMINATION OF NOMINAL DIAMETER - METHOD USING A NON-CONTACT OPTICAL MEASURING APPARATUS (ISO 2971:2013) |
| DIN EN ISO 25140:2010-12 | Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010) |
| DIN EN 12350-8:2010-12 | TESTING FRESH CONCRETE - PART 8: SELF-COMPACTING CONCRETE - SLUMP-FLOW TEST |
| DIN EN ISO 6883:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CONVENTIONAL MASS PER VOLUME (LITRE WEIGHT IN AIR) (ISO 6883:2017) |
| DIN 51130:2014-02 | Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test |
| DIN EN ISO 10272-2:2015-04 (Draft) | MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR THE DETECTION AND ENUMERATION OF CAMPYLOBACTER SPP. - PART 2: COLONY-COUNT TECHNIQUE (ISO 10272-2:2017) |
| DIN EN 12485:2015-08 (Draft) | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS |
| DIN EN ISO 15197:2015-12 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
| DIN EN ISO 2813:2015-02 | PAINTS AND VARNISHES - DETERMINATION OF GLOSS VALUE AT 20 DEGREES, 60 DEGREES AND 85 DEGREES (ISO 2813:2014) |
| DIN EN ISO 2431:2012-03 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011) |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| DIN EN 868-6:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 14637:2007-03 | Milk - Determination of urea content - Enzymatic method using difference in pH (Reference method) (ISO 14637:2004) |
| DIN EN ISO 3656:2011-05 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ULTRAVIOLET ABSORBANCE EXPRESSED AS SPECIFIC UV EXTINCTION (ISO 3656:2011 + AMD 1:2017) |
| DIN EN ISO 15025:2015-12 (Draft) | PROTECTIVE CLOTHING - PROTECTION AGAINST FLAME - METHOD OF TEST FOR LIMITED FLAME SPREAD (ISO 15025:2016) |
| DIN EN 826:2013-05 | Thermal insulating products for building applications - Determination of compression behaviour |
| DIN EN ISO 10272-1:2015-04 (Draft) | MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR DETECTION AND ENUMERATION OF CAMPYLOBACTER SPP. - PART 1: DETECTION METHOD (ISO 10272-1:2017) |
| DIN EN ISO 9167-1:2013-12 | RAPESEED - DETERMINATION OF GLUCOSINOLATE CONTENT - PART 1: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 9167-1:1992 + AMD 1:2013) |
| DIN EN 15058:2006-09 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
| DIN EN ISO 23470:2011-09 | SOIL QUALITY - DETERMINATION OF EFFECTIVE CATION EXCHANGE CAPACITY (CEC) AND EXCHANGEABLE CATIONS USING A HEXAMMINECOBALT TRICHLORIDE SOLUTION (ISO 23470:2007) |
| DIN EN ISO/IEC 17043:2010-05 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| DIN EN ISO 734-2:2001-02 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 2: RAPID EXTRACTION METHOD |
| EN 15690-2:2009 | Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| DIN EN ISO 9151:2015-12 (Draft) | PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - DETERMINATION OF HEAT TRANSMISSION ON EXPOSURE TO FLAME (ISO 9151:2016, CORRECTED VERSION 2017-04-01) |
| DIN EN 15852:2010-11 | Ambient air quality - Standard method for the determination of total gaseous mercury |
| DIN EN 14938-2:2010-12 | Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| DIN EN ISO 12872 E : 2014 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF THE 2-GLYCERYL MONOPALMITATE CONTENT (ISO 12872:2010) |
| DIN EN ISO 12872:2014-07 | Olive oils and olive-pomace oils - Determination of the 2-glyceryl monopalmitate content (ISO 12872:2010) |
| DIN EN ISO 29822 E : 2014 | VEGETABLE FATS AND OILS - ISOMERIC DIACYLGLYCEROLS - DETERMINATION OF RELATIVE AMOUNTS OF 1,2- AND 1,3-DIACYLGLYCEROLS (ISO 29822:2009) |
| DIN EN ISO 14403-2:2012-10 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012) |
| DIN EN 12350-11:2010-12 | Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test |
| DIN EN 15023-3:2010-12 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 16117-2:2013-02 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| DIN EN 15309:2007-08 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
| DIN EN ISO 21258:2010-11 | Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N<(Index)2>O) - Reference method: Non-dispersive infrared method (ISO 21258:2010) |
| DIN EN ISO 6886:2016-07 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF OXIDATIVE STABILITY (ACCELERATED OXIDATION TEST) (ISO 6886:2016) |
| DIN EN ISO 22959:2009-10 | Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection (ISO 22959:2009) |
| DIN EN ISO 19343:2016-05 (Draft) | MICROBIOLOGY OF THE FOOD CHAIN - DETECTION AND QUANTIFICATION OF HISTAMINE IN FISH AND FISHERY PRODUCTS - HPLC METHOD (ISO 19343:2017) |
| DIN EN 16857:2015-05 (Draft) | FOODSTUFFS - DETERMINATION OF BENZENE IN SOFT DRINKS, OTHER BEVERAGES AND VEGETABLE-BASED INFANT FOODS BY HEADSPACE GAS CHROMATOGRAPHY MASS SPECTROMETRY (HS-GC-MS) |
| DIN EN 16995:2016-05 (Draft) | FOODSTUFFS - VEGETABLE OILS AND FOODSTUFF ON BASIS OF VEGETABLE OILS - DETERMINATION OF MINERAL OIL SATURATED HYDROCARBONS (MOSH) AND MINERAL OIL AROMATIC HYDROCARBONS (MOAH) WITH ON-LINE HPLC-GC-FID ANALYSIS |
| DIN EN ISO 17184 E : 2014 | SOIL QUALITY - DETERMINATION OF CARBON AND NITROGEN BY NEAR-INFRARED SPECTROMETRY (NIRS) (ISO 17184:2014) |
| DIN EN 15446:2008-04 | Fugitive and diffuse emissions of common concern to industry sectors - Measurement of fugitive emission of vapours generating from equipment and piping leaks |
| DIN ISO 20179:2007-10 | Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection (ISO 20179:2005) |
| DIN EN 15703-2:2015-03 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN EN ISO 6271:2016-05 | CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT COLOUR SCALE (ISO 6271:2015) |
| DIN EN ISO 734:2016-05 | Oilseed meals - Determination of oil content - Extraction method with hexane (or light petroleum) (ISO 734:2015) |
| DIN EN 15590:2011-11 | Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index |
| DIN EN 12350-9:2010-12 | Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test |
| DIN EN ISO 18465:2017-05 | MICROBIOLOGY OF THE FOOD CHAIN - QUANTITATIVE DETERMINATION OF EMETIC TOXIN (CEREULIDE) USING LC-MS/MS (ISO 18465:2017) |
| DIN ISO 11262:2012-04 | Soil quality - Determination of total cyanide (ISO 11262:2011) |
| DIN EN 14742:2015-07 | CHARACTERIZATION OF SLUDGES - LABORATORY CHEMICAL CONDITIONING PROCEDURE |
| DIN EN 15859:2010-08 | Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures |
| DIN EN 16320:2013-12 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
| DIN EN ISO 22630:2016-05 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - RAPID EXTRACTION METHOD (ISO 22630:2015) |
| DIN EN 15962:2011-04 | Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients |
| DIN ISO 8243:2015-12 | CIGARETTES - SAMPLING (ISO 8243:2013) |
| DIN ISO 11352:2013-03 | WATER QUALITY - ESTIMATION OF MEASUREMENT UNCERTAINTY BASED ON VALIDATION AND QUALITY CONTROL DATA (ISO 11352:2012) |
| DIN EN 16357:2013-11 | Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid |
| DIN EN ISO 16297:2014-09 | MILK - BACTERIAL COUNT - PROTOCOL FOR THE EVALUATION OF ALTERNATIVE METHODS (ISO 16297:2013) |
| DIN EN 16168:2012-11 | Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method; German version EN 16168:2012 |
| DIN EN ISO 16967:2015-07 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI (ISO 16967:2015) |
| DIN ISO 8454:2012-02 | Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method (ISO 8454:2007 + Amd.1:2009) |
| DIN EN 16166:2012-11 | Sludge, treated biowaste and soil - Determination of adsorbable organically bound halogens (AOX) |
| DIN EN 868-7:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 12873 E : 2014 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF WAX CONTENT BY CAPILLARY GAS CHROMATOGRAPHY (ISO 12873:2010) |
| DIN EN 16378:2013-12 | CEREALS - DETERMINATION OF IMPURITIES CONTENT IN MAIZE (ZEA MAYS, L.) AND SORGHUM (SORGHUM BICOLOR, L.) |
| DIN EN 13038:2012-01 | Soil improvers and growing media - Determination of electrical conductivity |
| DIN EN ISO 11290-2:2005-01 | MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR THE DETECTION AND ENUMERATION OF LISTERIA MONOCYTOGENES AND OF LISTERIA SPP. - PART 2: ENUMERATION METHOD (ISO 11290-2:2017) |
| DIN EN 14940-2:2006-09 | Copper and copper alloys - Determination of chromium content - Part 2: FAAS method |
| DIN EN 868-4:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 4: PAPER BAGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-3:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 9614-1:2009-11 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| DIN EN 868-2:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| DIN EN 14942-2:2006-09 | Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method |
| DIN EN 14790:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| DIN EN ISO 663:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INSOLUBLE IMPURITIES CONTENT (ISO 663:2017) |
| DIN EN 16845-1:2017-05 | PHOTOCATALYSIS - ANTI-SOILING CHEMICAL ACTIVITY USING ADSORBED ORGANICS UNDER SOLID/SOLID CONDITIONS - PART 1: DYES ON POROUS SURFACES |
| DIN EN ISO 16035:2005-11 | Animal and vegetable fats and oils - Determination of low-boiling halogenated hydrocarbons in edible oils (ISO 16035:2003) |
| DIN EN 14123:2008-03 | FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] AND THE SUM OF AFLATOXIN B[1], B[2], G[1] AND G[2] IN HAZELNUTS, PEANUTS, PISTACHIOS, FIGS, AND PAPRIKA POWDER - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST-COLUMN DERIVATISATION AND IMMUNOAFFINITY COLUMN CLEANUP |
| DIN EN 868-3:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN ISO 22197-1:2016-04 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 1: REMOVAL OF NITRIC OXIDE (ISO 22197-1:2007) |
| DIN EN 15055:2006-08 | Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MS method |
| DIN EN 14702-1:2006-06 | Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index) |
| DIN EN ISO 659:2009-11 | Oilseeds - Determination of oil content (Reference method) (ISO 659:2009) |
| DIN EN ISO 8069:2007-09 | Dried milk - Determination of content of lactic acid and lactates (ISO 8069:2005) |
| DIN EN ISO 6320:2017-07 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF REFRACTIVE INDEX (ISO 6320:2017) |
| DIN ISO 6673:2007-03 | GREEN COFFEE - DETERMINATION OF LOSS IN MASS AT 105 DEGREES C |
| DIN EN 14546:2005-07 | Foodstuffs - Determination of trace elements - Determination of total arsenic by hydride generation atomic absorption spectrometry (HGAAS) after dry ashing |
| DIN EN ISO 20988:2007-09 | AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY |
| DIN EN 15933:2012-11 | Sludge, treated biowaste and soil - Determination of pH |
| DIN EN 14970:2006-04 | Textiles - Knitted fabrics - Determination of stitch length and yarn linear density in weft knitted fabrics |
| DIN EN 868-6:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| DIN EN 14627:2005-07 | Foodstuffs - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion |
| DIN EN 15109:2007-02 | SURFACE ACTIVE AGENTS - DETERMINATION OF THE ACTIVE MATTER CONTENT OF ALKYLAMIDOPROPYLBETAINES |
| DIN EN 14790:2017-05 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| DIN EN 16320:2017-05 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
| DIN EN ISO 10304-1:2009-07 | WATER QUALITY - DETERMINATION OF DISSOLVED ANIONS BY LIQUID CHROMATOGRAPHY OF IONS - PART 1: DETERMINATION OF BROMIDE, CHLORIDE, FLUORIDE, NITRATE, NITRITE, PHOSPHATE AND SULFATE |
| DIN EN ISO 527-2:2012-06 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| DIN EN ISO 16948:2015-09 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen (ISO 16948:2015) |
| DIN EN ISO 5983-2:2009-10 | ANIMAL FEEDING STUFFS - DETERMINATION OF NITROGEN CONTENT AND CALCULATION OF CRUDE PROTEIN CONTENT - PART 2: BLOCK DIGESTION AND STEAM DISTILLATION METHOD |
| DIN EN ISO 9151:2017-05 | PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - DETERMINATION OF HEAT TRANSMISSION ON EXPOSURE TO FLAME (ISO 9151:2016, CORRECTED VERSION 2017-04-01) |
| DIN EN ISO 8968-1:2002-06 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 1: KJELDAHL PRINCIPLE AND CRUDE PROTEIN CALCULATION (ISO 8968-1:2014) |
| DIN EN 14701-1:2006-06 | Characterisation of sludges - Filtration properties - Part 1: Capillary suction time (CST) |
| DIN EN 14702-2:2006-06 | Characterisation of sludges - Settling properties - Part 2: Determination of thickenability |
| DIN EN ISO 14501:2008-01 | Milk and milk powder - Determination of aflatoxin M1 content - Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography (ISO 14501:2007) |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| DIN 13303-2:1982-11 | STOCHASTICS - MATHEMATICAL STATISTICS - CONCEPTS, SIGNS AND SYMBOLS |
| DIN 55350-22:1987-02 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS - CONCEPTS OF STATISTICS - SPECIAL PROBABILITY DISTRIBUTIONS |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| DIN 13303-1:1982-05 | STOCHASTICS; PROBABILITY THEORY, COMMON FUNDAMENTAL CONCEPTS OF MATHEMATICAL AND OF DESCRIPTIVE STATISTICS; CONCEPTS, SIGNS AND SYMBOLS |
| DIN 55350-24:1982-11 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS; CONCEPTS OF STATISTICS; ANALYTICAL STATISTICS |
| DIN 55350-23:1983-04 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS; CONCEPTS OF STATISTICS; DESCRIPTIVE STATISTICS |
| DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| ISO 3534-3:2013 | Statistics — Vocabulary and symbols — Part 3: Design of experiments |
| DIN 55350-21:1982-05 | CONCEPTS OF QUALITY ASSURANCE AND STATISTICS; CONCEPTS OF STATISTICS; RANDOM VARIABLES AND PROBABILITY DISTRIBUTIONS |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.