DIN ISO 48:2016-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010)
Available format(s)
Hardcopy , PDF
Superseded date
03-07-2021
Superseded by
Language(s)
German, English
Published date
09-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DevelopmentNote |
Supersedes DIN 53519-1 and DIN 53519-2. (07/2003)
|
| DocumentType |
Standard
|
| Pages |
29
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 48:2010 | Identical |
| DIN ISO 27588:2014-12 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE (ISO 27588:2012) |
| DIN 53150:2002-09 | PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD) |
| DIN HDBK 479 : 2ED 2017 | KAUTSCHUK UND ELASTOMERE - PHYSIKALISCHE UND CHEMISCHE PRUEFVERFAHREN |
| DIN ISO 13226:2015-12 | Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011) |
| DIN EN ISO 9117-1:2009-10 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
| DIN EN ISO 28706-4:2016-07 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL (ISO 28706-4:2016) |
| DIN EN ISO 10555-6:2017-11 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015) |
| DIN EN 15129:2010-06 | ANTI-SEISMIC DEVICES |
| DIN EN 14241-1:2013-11 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| DIN EN ISO 5470-1:2015-04 (Draft) | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| DIN EN ISO 6149-3:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006) |
| DIN EN 14982:2011-01 | Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (includes Amendment A1:2010) |
| DIN ISO 8536-6:2017-09 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES (ISO 8536-6:2016) |
| DIN ISO 8536-6:2012-09 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES (ISO 8536-6:2016) |
| BWB TL 8415-0309 : 1ED 2006 | FINGERHANDSCHUH, CHEMIKALIENSCHUTZ FUER PROBENAHMEVORRICHTUNG TPZ-1 ABC |
| DIN EN 13071-1:2008-10 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| DIN EN 1063:2000-01 | GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST BULLET ATTACK |
| DIN EN 14354:2005-03 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
| DIN EN ISO 8980-5:2005-10 | Ophthalmic optics - Uncut finished spectacle lenses - Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant (ISO 8980-5:2005) |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| DIN ISO 614:2015-12 | SHIPS AND MARINE TECHNOLOGY - TOUGHENED SAFETY GLASS PANES FOR RECTANGULAR WINDOWS AND SIDE SCUTTLES - PUNCH METHOD OF NON-DESTRUCTIVE STRENGTH TESTING (ISO 614:2012) |
| DIN EN ISO 8362-2:2016-02 | Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015) |
| DIN EN ISO 12311:2015-06 | Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15); German version EN ISO 12311:2013 |
| DIN ISO 3302-1:2016-10 (Draft) | RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES |
| DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| DIN EN ISO 8871-2:2014-08 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003 + AMD.1:2005) |
| DIN EN 13748-1:2005-08 | TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE |
| DIN EN 682:2006-10 | Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
| DIN EN 1097-8:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| DIN EN 1288-2:2000-09 | GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 2: COAXIAL DOUBLE RING TEST ON FLAT SPECIMENS WITH LARGE TEST SURFACE AREAS |
| DIN ISO 8362-5:2011-06 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| DIN EN ISO 28706-2:2016-04 (Draft) | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS (ISO 28706-2:2017) |
| DIN EN ISO 9117-5:2012-11 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
| DIN ISO 15759:2006-05 | Medical infusion equipment - Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process (ISO 15759:2005) |
| DIN EN ISO 8362-5:2016-07 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
| DIN ISO 3302-2:1999-10 | RUBBER - TOLERANCES FOR PRODUCTS - PART 2: GEOMETRICAL TOLERANCES |
| DIN EN ISO 8434-1:2016-10 (Draft) | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| DIN EN ISO 6806:2015-08 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
| DIN EN 1288-5:2000-09 | GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 5: COAXIAL DOUBLE RING TEST ON FLAT SPECIMENS WITH SMALL TEST SURFACE AREAS |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| DIN EN 1288-3:2000-09 | GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 3: TEST WITH SPECIMEN SUPPORTED AT TWO POINTS (FOUR POINT BENDING) |
| DIN ISO 11040-2:2012-10 | Prefilled syringes - Part 2: Plunger stoppers for dental local anaesthetic cartridges (ISO 11040-2:2011) |
| DIN ISO 11040-5:2013-12 | PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012) |
| DIN EN ISO 12945-3:2014-10 | Textiles - Determination of the fabric propensity to surface pilling, fuzzing or matting - Part 3: Random tumble pilling method (ISO 12945-3:2014) |
| DIN EN 15551:2013-05 (Draft) | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| DIN EN 16230-1:2015-04 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| DIN 16742:2013-10 | PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
| DIN EN ISO 19879:2011-01 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
| DIN EN ISO 6149-2:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006) |
| DIN EN ISO 8536-2:2010-08 | Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010) |
| DIN EN 1123-1:1999-03 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| DIN ISO 23529:2012-10 | RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS (ISO 23529:2010) |
| ISO 7267-2:2008 | Rubber-covered rollers Determination of apparent hardness Part 2: Shore-type durometer method |
| DIN ISO 18898:2016-09 (Draft) | RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS (ISO 18898:2016) |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| ISO 7267-3:2017 | Rubber-covered rollers Determination of apparent hardness Part 3: Pusey and Jones method |
| DIN ISO 7743:2016-08 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES (ISO 7743:2011) |
| ISO 7619-2:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method |
| ISO 7743:2017 | Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
| ISO 18898:2016 | Rubber Calibration and verification of hardness testers |
| ISO/TR 9272:2005 | Rubber and rubber products Determination of precision for test method standards |
| ISO 7267-1:2017 | Rubber-covered rollers Determination of apparent hardness Part 1: IRHD method |
| ISO 18517:2015 | Rubber, vulcanized or thermoplastic Hardness testing Introduction and guide |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.