DIN EN ISO 683-17:2015-02
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
Available format(s)
Hardcopy , PDF
Superseded date
12-01-2023
Superseded by
Language(s)
German, English
Published date
02-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
National Annex NA (informative) - Bibliography
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by the purchaser
6 Manufacturing process
7 Requirements
8 Inspection
9 Test methods
10 Marking
Annex A (normative) - Supplementary or special
requirements
Annex B (informative) - Designations of the steels
given in Tables 3, 5 and 6 and of comparable
grades covered in various designation systems
Annex C (informative) - Dimensional standards applicable
to products complying with this part ISO 683
Bibliography
This standard is included in DIN HDBK 218, 404, 404/1 and 24.
| DevelopmentNote |
Supersedes DIN 17230 (05/2000)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN ISO 683-17:2014 | Identical |
| NBN EN ISO 683-17 : 2014 | Identical |
| BS EN ISO 683-17:2014 | Identical |
| NS EN ISO 683-17 : 2014 | Identical |
| UNE-EN ISO 683-17:2015 | Identical |
| NF EN ISO 683-17 : 2015 | Identical |
| UNI EN ISO 683-17 : 2014 | Identical |
| ISO 683-17:2014 | Identical |
| NEN EN ISO 683-17 : 2014 | Identical |
| SN EN ISO 683-17 : 2014 | Identical |
| EN ISO 683-17:2014 | Identical |
| ONORM EN ISO 683-17 : 2015 | Identical |
| DIN HDBK 24 : 9ED 2012 | |
| ASTM D 7421 : 2016 : REDLINE | Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 6425 : 2017 : REDLINE | Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine |
| ASTM D 7594 : 2016 : REDLINE | Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 7217 : 2016 : REDLINE | Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| ASTM D 7420 : 2018 : REDLINE | Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| DIN HDBK 218 : 6ED 2014 | |
| DIN HDBK 404 : 5ED 2009 | STAHL UND EISEN: GUETENORMEN 4 - MASCHINENBAU, WERKZEUGBAU - STAHLAUSWAHL. MASCHINENBAUSTAHL FUER ALLGEMEINE VERWENDUNG. MASCHINENBAUSTAHL FUER BESONDERE VERARBEITUNG ODER VERWENDUNG. PRAEZISIONSSTAHLROHRE. WERKZEUGSTAEHLE. STAHLGUSS |
| DIN HDBK 404/1 : 1ED 2013 | MASCHINENBAU/WERKZEUGBAU - MASCHINENBAUSTAHL FUER ALLGEMEINE UND BESONDERE VERWENDUNG |
| ASTM D 5706 : 2016 : REDLINE | Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| DIN ISO 6370-2:2013-08 | Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2011) |
| DIN 628-5:2011-06 | ROLLING BEARINGS - ANGULAR CONTACT RADIAL BALL BEARINGS - PART 5: DOUBLE ROW, WITH SPACER BALLS |
| ASTM D 5707 : 2016 : REDLINE | Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| SAE AMS 2431/5 : 2011 | PEENING MEDIA, HARDENED STEEL PEENING BALLS |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| ISO 5949:1983 | Tool steels and bearing steels Micrographic method for assessing the distribution of carbides using reference photomicrographs |
| ISO 6929:2013 | Steel products — Vocabulary |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| ISO/TS 4949:2016 | Steel names based on letter symbols |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| ISO 4969:2015 | Steel Etching method for macroscopic examination |
| DIN EN ISO 642:2000-01 | Steel - Hardenability test by end quencing (Jominy test) (ISO 642:1999); English version of DIN EN ISO 642 |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| DIN EN ISO 377:2015-12 | STEEL AND STEEL PRODUCTS - LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING (ISO 377:2017) |
| DIN EN ISO 3887:2016-08 (Draft) | STEELS - DETERMINATION OF DEPTH OF DECARBURIZATION |
| DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| ISO 3763:1976 | Wrought steels — Macroscopic methods for assessing the content of non-metallic inclusions |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| EN 10278:1999 | Dimensions and tolerances of bright steel products |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| DIN EN ISO 643:2015-06 (Draft) | STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT GRAIN SIZE (ISO 643:2012) |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| DIN EN ISO 6508-1:2016-12 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016); German version EN ISO 6508-1:2016 |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 9443:1991 | Heat-treatable and alloy steels Surface quality classes for hot-rolled round bars and wire rods Technical delivery conditions |
| DIN EN ISO 14284:2003-02 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.