DIN EN ISO 2081:2009-05
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
Hardcopy , PDF
03-07-2021
English
01-01-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, abbreviated terms and symbols
3.1 Terms and definitions
3.2 Abbreviated terms
3.3 Symbols
4 Information to be supplied by the purchaser to the electroplater
4.1 Essential information
4.2 Additional information
5 Designation
5.1 General
5.2 Designation specification
5.3 Designation of the basis material
5.4 Designation of heat treatment requirements
5.5 Examples
6 Requirements
6.1 Appearance
6.2 Thickness
6.3 Conversion coatings and other supplementary
treatments
6.4 Adhesion of zinc and chromate coatings
6.5 Accelerated corrosion testing
6.6 Stress relief heat treatments before cleaning and
metal deposition
6.7 Hydrogen-embrittlement-relief heat treatments after
electroplating
7 Sampling
Annex A (normative) - Designation of chromate conversion
coatings and other supplementary treatments
Annex B (normative) - Measurement of average thickness of
coating on small articles
Annex C (informative) - Additional information on corrosion
resistance, rinsing and drying, processing parts in
bulk and dyeing of chromate conversion coatings
Bibliography
National Annex NA (informative) Bibliography
Describes requirements for electroplated coatings of zinc with supplementary treatments on iron or steel.
DevelopmentNote |
Supersedes DIN EN 12329 E. (05/2009)
|
DocumentType |
Standard
|
Pages |
23
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
Standards | Relationship |
ISO 2081:2008 | Identical |
EN ISO 2081:2018 | Identical |
DIN EN 12574-2:2017-05 | STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
DIN EN ISO 5912:2013-08 | CAMPING TENTS (ISO 5912:2011) |
EN 573-2:1994 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system |
ISO 2080:2008 | Metallic and other inorganic coatings Surface treatment, metallic and other inorganic coatings Vocabulary |
ISO 9587:2007 | Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
ISO 27830:2008 | Metallic and other inorganic coatings Guidelines for specifying metallic and inorganic coatings |
ISO 3543:2000 | Metallic and non-metallic coatings Measurement of thickness Beta backscatter method |
ISO 27831-1:2008 | Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 1: Ferrous metals and alloys |
ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
ISO 10587:2000 | Metallic and other inorganic coatings Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods Inclined wedge method |
ISO 15724:2001 | Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method |
ISO 3892:2000 | Conversion coatings on metallic materials Determination of coating mass per unit area Gravimetric methods |
CEN/TS 13388:2015 | Copper and copper alloys - Compendium of compositions and products |
ISO 4518:1980 | Metallic coatings Measurement of coating thickness Profilometric method |
ISO 2819:1980 | Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion |
ISO 27831-2:2008 | Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 2: Non-ferrous metals and alloys |
EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
ASTM E 527 : 2016 : REDLINE | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
ISO 4519:1980 | Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes |
ISO 3497:2000 | Metallic coatings Measurement of coating thickness X-ray spectrometric methods |
ISO 9588:2007 | Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 2177:2003 | Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution |
ISO 10289:1999 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests |
ISO 3613:2010 | Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods |
ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
DIN EN ISO 2819:1995-01 | METALLIC COATINGS ON METALLIC SUBSTRATES - ELECTRODEPOSITED AND CHEMICALLY DEPOSITED COATINGS - REVIEW OF METHODS AVAILABLE FOR TESTING ADHESION |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
DIN EN ISO 2080:2009-08 | Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.