DIN EN ISO 17225-1 E : 2014
Current
The latest, up-to-date edition.
SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS (ISO 17225-1:2014)
09-22-2014
National foreword<br>National Annex NA (informative) - Bibliography<br>Foreword<br>Introduction<br>1 Scope<br>2 Normative references<br>3 Terms and definitions<br>4 Symbols and abbreviated terms<br>5 Principle<br>6 Classification of origin and sources of<br> solid biofuels<br>7 Specification of solid biofuels based on<br> traded forms and properties<br>Annex A (informative) - Illustrations of typical<br> forms of wood fuels<br>Annex B (informative) - Typical values of solid<br> biomass fuels<br>Annex C (informative) - Examples of possible<br> causes for deviant levels for different<br> properties and of consequences of handling<br> and treatments for the properties of biomass<br>Annex D (informative) - Calculation of the net<br> calorific value at different bases and energy<br> density as received<br>Annex E (informative) - Comparison of moisture<br> content as received and dry basis<br>Bibliography
Provides the fuel quality classes and specifications for solid biofuels of raw and processed materials originating from: a) forestry and arboriculture; b) agriculture and horticulture; c) aquaculture.
| DevelopmentNote |
Supersedes DIN EN 14961-1 E. (09/2014)
|
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| EN ISO 17225-1:2014 | Identical |
| ISO 17225-1:2014 | Identical |
| DIN EN ISO 17225-2 E : 2014 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: GRADED WOOD PELLETS (ISO 17225-2:2014) |
| DIN EN ISO 18125:2017-08 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE (ISO 18125:2017) |
| DIN EN ISO 17827-1 E : 2016 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 1: OSCILLATING SCREEN METHOD USING SIEVES WITH APERTURES OF 3,15 MM AND ABOVE (ISO 17827-1:2016) |
| DIN EN ISO 17827-2 E : 2016 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 2: VIBRATING SCREEN METHOD USING SIEVES WITH APERTURE OF 3,15 MM AND BELOW (ISO 17827-2:2016) |
| DIN EN ISO 17225-4 E : 2014 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: GRADED WOOD CHIPS (ISO 17225-4:2014) |
| DIN EN ISO 17225-3 E : 2014 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: GRADED WOOD BRIQUETTES (ISO 17225-3:2014) |
| DIN EN ISO 18125 E : 2017 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE (ISO 18125:2017) |
| DIN EN ISO 17830:2015-03 (Draft) | SOLID BIOFUELS - PARTICLE SIZE DISTRIBUTION OF DISINTEGRATED PELLETS (ISO 17830:2016) |
| DIN EN ISO 18135:2016-01 (Draft) | SOLID BIOFUELS - SAMPLING (ISO 18135:2017) |
| CEN/TS 15370-1:2006 | Solid biofuels - Method for the determination of ash melting behaviour - Part 1: Characteristic temperatures method |
| ISO 14780:2017 | Solid biofuels — Sample preparation |
| ISO 17830:2016 | Solid biofuels — Particle size distribution of disintegrated pellets |
| DIN EN ISO 16994:2016-12 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE (ISO 16994:2016) |
| DIN EN ISO 18846:2015-05 (Draft) | SOLID BIOFUELS - DETERMINATION OF FINES CONTENT IN QUANTITIES OF PELLETS (ISO 18846:2016) |
| DIN EN ISO 16967:2015-07 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI (ISO 16967:2015) |
| DIN EN ISO 18134-2:2016-09 (Draft) | SOLID BIOFUELS - DETERMINATION OF MOISTURE CONTENT - OVEN DRY METHOD - PART 2: TOTAL MOISTURE - SIMPLIFIED METHOD (ISO 18134-2:2017) |
| DIN EN ISO 17829:2016-03 | SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS (ISO 17829:2015) |
| DIN EN ISO 16968:2015-09 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS (ISO 16968:2015) |
| DIN EN ISO 17831-1:2016-05 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS (ISO 17831-1:2015) |
| EN 13556:2003 | Round and sawn timber - Nomenclature of timbers used in Europe |
| DIN EN ISO 18125:2015-12 (Draft) | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE (ISO 18125:2017) |
| DIN EN ISO 18123:2016-03 | Solid biofuels - Determination of the content of volatile matter (ISO 18123:2015) |
| DIN EN ISO 16993:2016-11 | SOLID BIOFUELS - CONVERSION OF ANALYTICAL RESULTS FROM ONE BASIS TO ANOTHER (ISO 16993:2016) |
| DIN EN ISO 17827-1:2016-10 | Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016) |
| EN 15105:2011 | Solid biofuels - Determination of the water soluble chloride, sodium and potassium content |
| ISO 18135:2017 | Solid Biofuels — Sampling |
| DIN EN ISO 17831-2:2016-05 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 2: BRIQUETTES (ISO 17831-2:2015) |
| DIN EN ISO 16559:2014-12 | Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014) |
| ISO 18125:2017 | Solid biofuels — Determination of calorific value |
| DIN EN ISO 18134-1:2015-12 | Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method (ISO 18134-1:2015) |
| ISO 17827-1:2016 | Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above |
| DIN EN ISO 17827-2:2016-10 | Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016) |
| DIN EN ISO 17828:2016-05 | SOLID BIOFUELS - DETERMINATION OF BULK DENSITY (ISO 17828:2015) |
| ISO 17827-2:2016 | Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below |
| EN 14774-3:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample |
| DIN EN ISO 18847:2015-09 (Draft) | SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY OF PELLETS AND BRIQUETTES (ISO 18847:2016) |
| DIN EN ISO 18122:2016-03 | Solid biofuels - Determination of ash content (ISO 18122:2015) |
| DIN EN ISO 14780:2016-01 (Draft) | SOLID BIOFUELS - SAMPLE PREPARATION (ISO 14780:2017) |
| ISO 18846:2016 | Solid biofuels — Determination of fines content in quantities of pellets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.