DIN EN ISO 16474-1:2014-03
Current
Current
The latest, up-to-date edition.
PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
Available format(s)
Hardcopy , PDF
Language(s)
German, English
Published date
03-01-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Requirements for laboratory exposure devices
6 Test specimens - Preparation, replicates, storage
and conditioning
7 Test conditions and procedure
8 Periods of exposure and evaluation of test results
9 Test report
Annex A (informative) - Procedure for measuring the irradiance
uniformity in the specimen exposure area
Annex B (informative) - Factors that decrease the degree of
correlation between artificial accelerated weathering
or artificial accelerated irradiation exposures and
actual-use exposures
Annex C (informative) - Solar spectral irradiance standard
Bibliography
This standard is included in DIN HDBK 400.
| DevelopmentNote |
Supersedes DIN EN ISO 11341 and DIN EN ISO 11507. (03/2014)
|
| DocumentType |
Standard
|
| Pages |
31
|
| ProductNote |
This standard is identical to EN ISO 16474-1 : 2013
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 16474-1:2013 | Identical |
| DIN EN ISO 16474-2:2014-03 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013) |
| DIN HDBK 400 : 2ED 2014 | BEWITTERUNG - 48 NORMEN ZUR NATUERLICHEN UND KUENSTLICHEN BEWITTERUNG IM ORIGINALTEXT |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 16474-4:2013 | Paints and varnishes — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps |
| DIN EN ISO 4628-1:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
| ISO 16474-2:2013 | Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| DIN EN ISO 4628-7:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2016) |
| DIN EN ISO 4628-6:2011-12 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
| DIN EN ISO 11664-4:2012-06 | COLORIMETRY - PART 4: CIE 1976 L*A*B* COLOUR SPACE (ISO 11664-4:2008) |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 11664-4:2008 | Colorimetry Part 4: CIE 1976 L*a*b* Colour space |
| ISO 4628-8:2012 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
| DIN EN ISO 4628-2:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING (ISO 4628-2:2016) |
| ISO 3668:2017 | Paints and varnishes — Visual comparison of colour of paints |
| DIN EN ISO 2810:2004-10 | PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
| DIN EN ISO 4618:2015-01 | Paints and varnishes - Terms and definitions (ISO 4618:2014); Trilingual version EN ISO 4618:2014 |
| ASTM G 156 : 2017 : REDLINE | Standard Practice for Selecting and Characterizing Weathering Reference Materials |
| DIN EN ISO 4628-4:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING (ISO 4628-4:2016) |
| ISO 16474-3:2013 | Paints and varnishes Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
| DIN EN ISO 15528:2013-12 | PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING (ISO 15528:2013) |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 4628-3:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
| ISO/TR 19032:2006 | Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| DIN EN ISO 1513:2010-10 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| ISO 4628-10:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| DIN EN 23270:1991-09 | PAINTS, VARNISHES AND THEIR RAW MATERIALS; TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING |
| ISO 4628-1:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
| DIN EN ISO 2813:2015-02 | PAINTS AND VARNISHES - DETERMINATION OF GLOSS VALUE AT 20 DEGREES, 60 DEGREES AND 85 DEGREES (ISO 2813:2014) |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| DIN EN ISO 4628-8:2013-03 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
| ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
| DIN EN ISO 1514:2005-02 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING (ISO 1514:2016) |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| DIN EN ISO 4628-3:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016 |
| ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
| DIN EN ISO 4628-10:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2016) |
| DIN EN ISO 4628-5:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| ISO 4628-7:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 7: Assessment of degree of chalking by velvet method |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.