DIN EN ISO 15748-1:2002-09
Current
The latest, up-to-date edition.
SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 1: PLANNING AND DESIGN
Hardcopy , PDF
English, German
01-01-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Capacity requirements
5 Sanitary requirements
6 Potable water supply systems
7 Technical requirements
8 Pipelines
9 Pipes and pipe dimensions
10 Fittings and pipe joints
11 Fittings
12 Protective fittings
13 Pumps
14 Potable water tanks
15 Potable water heating plants
16 Sterilization of potable water
17 Layout of piping
18 Calculation principles
19 Testing and flushing of pipelines
Annex A (informative) Explanations
Annex B (informative) Appropriate pipe dimensions
Annex C (informative) Inspection and maintenance of
filters
Bibliography
Applies to the planning, design and configuration of potable water supply systems on ships, stationary or floating marine structures and inland navigation vessels.
| DevelopmentNote |
Supersedes DIN 86283-1 E (05/2003)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN ISO 15748-1 : 2002 | Identical |
| NS EN ISO 15748-1 : 1ED 2002 | Identical |
| I.S. EN ISO 15748-1:2002 | Identical |
| UNI EN ISO 15748-1 : 2004 | Identical |
| BS EN ISO 15748-1:2002 | Identical |
| SN EN ISO 15748-1 : 2002 | Identical |
| ISO 15748-1:2002 | Identical |
| NF EN ISO 15748-1 : 2003 | Identical |
| EN ISO 15748-1:2002 | Identical |
| UNE-EN ISO 15748-1:2003 | Identical |
| DIN 2001-2:2009-04 | DRINKING WATER SUPPLY FROM SMALL UNITS AND NON STATIONARY UNITS - PART 2: NON STATIONARY UNITS - GUIDELINES FOR DRINKING WATER, PLANNING, CONSTRUCTION, OPERATION ANDMAINTENANCE OF UNITS - TECHNICAL RULE OF THE DVGW |
| ISO 2604-3:1975 | Steel products for pressure purposes Quality requirements Part 3: Electric resistance and induction-welded tubes |
| ISO 7858-2:2000 | Measurement of water flow in closed conduits Combination meters for cold potable water Part 2: Installation requirements |
| DIN EN ISO 15748-2:2002-09 | SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 2: METHOD OF CALCULATION |
| ISO 274:1975 | Copper tubes of circular section — Dimensions |
| ISO 15748-2:2002 | Ships and marine technology — Potable water supply on ships and marine structures — Part 2: Method of calculation |
| DIN EN ISO 14726-1:2001-12 | SHIPS AND MARINE TECHNOLOGY - IDENTIFICATION COLOURS FOR THE CONTENT OF PIPING SYSTEMS - PART 1: MAIN COLOURS AND MEDIA |
| ISO 2604-2:1975 | Steel products for pressure purposes Quality requirements Part 2: Wrought seamless tubes |
| ISO 2604-5:1978 | Steel products for pressure purposes Quality requirements Part 5: Longitudinally welded austenitic stainless steel tubes |
| ISO 14726-1:1999 | Ships and marine technology Identification colours for the content of piping systems Part 1: Main colours and media |
| ISO 426-2:1983 | Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 2: Leaded copper-zinc alloys |
| ISO 10221:1993 | Ductile iron pipelines Rubber sealing rings for pipelines carrying potable water |
| ISO 161-1:1996 | Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series |
| ISO 7858-3:1992 | Measurement of water flow in closed conduits Meters for cold potable water Combination meters Part 3: Test methods |
| ISO 14726-2:2002 | Ships and marine technology Identification colours for the content of piping systems Part 2: Additional colours for different media and/or functions |
| ISO 5620-1:1992 | Shipbuilding and marine structures Filling connection for drinking water tanks Part 1: General requirements |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| DIN ISO 228-1:2001-04 | PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - PART 1: DIMENSIONS, TOLERANCES AND DESIGNATION |
| ISO 65:1981 | Carbon steel tubes suitable for screwing in accordance with ISO 7-1 |
| ISO 7858-1:1998 | Measurement of water flow in closed conduits Combination meters for cold potable water Part 1: Specifications |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 3114:1977 | Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method |
| ISO 1635:1974 | Wrought copper and copper alloys Round tubes for general purposes Mechanical properties |
| ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
| DIN EN ISO 14726-1 E : 2001 | SHIPS AND MARINE TECHNOLOGY - IDENTIFICATION COLOURS FOR THE CONTENT OF PIPING SYSTEMS - PART 1: MAIN COLOURS AND MEDIA |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.