DIN EN ISO 15002:2008-11
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS
Hardcopy , PDF
01-29-2021
English
11-01-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsbereich
2* Normative Verweisungen
3 Begriffe
4 Anordnung von Durchflussmesssystemen und -einrichtungen
5 Allgemeine Anforderungen
5.1 Sicherheit
5.2 Alternative Konstruktion
5.3 Werkstoffe
5.4 Anforderungen an die Ausführung
5.5 Konstruktive Anforderungen
6 Prüfverfahren
6.1 Allgemeines
6.2 Prüfverfahren auf mechanische Festigkeit
6.3 Prüfverfahren auf Dichtheit
6.4 Prüfverfahren der Haltbarkeit von Kennzeichnungen
und Farbcodierung
7 Kennzeichnung, Farbcodierung und Verpackung
7.1 Kennzeichnung
7.2 Farbcodierung
7.3 Verpackung
8 Informationen des Herstellers
Anhang A (informativ) Begründungen
Anhang B (informativ) Anordnungen von Durchflussmesssystemen
und -einrichtnd den grundlegenden Anforderungen der
EG-Richtlinie 93/42/EWGG
Anhang C (informativ) Umweltgesichtspunkte
Literaturhinweise
Anhang ZA (informativ) Zusammenhang zwischen dieser Europäischen
Norm und den grundlegenden Anforderungen der
EG-Richtlinie 93/42/EWG
Applies to: - flow-metering devices that are connected, either directly or by means of flexible connecting assemblies, and disconnected by the operator at terminal units of a medical gas pipeline system for flow adjustment, measurement and delivery of medical gases; - flow-metering devices that are connected and disconnected by the operator at gas-specific connection points of devices such as pressure regulators.
| Committee |
TC 121
|
| DevelopmentNote |
Supersedes DIN EN 13220. (11/2008) DRAFT AMD 1 issued in April 2017. (04/2017)
|
| DocumentType |
Standard
|
| Pages |
31
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 15002:2008 | Identical |
| EN ISO 15002:2008 | Identical |
| DIN EN ISO 10524-4:2008-09 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
| EN 13220 : 1998 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| DIN EN ISO 7396-1:2016-09 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| DIN EN ISO 9170-1:2016-09 (Draft) | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| DIN EN ISO 5359:2015-02 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| DIN EN 60601-1-6 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: USABILITY (IEC 60601-1-6:2010 + A1:2013) |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| IEC 60601-1-6:2010+AMD1:2013 CSV | Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
| DIN EN ISO 11114-3:2011-04 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
| ISO 19054:2005 | Rail systems for supporting medical equipment |
| DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
| DIN EN ISO 10524-3:2013-06 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005 + AMD 1:2013) |
| ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| DIN EN ISO 15001:2012-06 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| DIN EN ISO 19054:2006-09 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005 + AMD1:2016) |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| ISO 10524-3:2005 | Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves |
| ISO/TR 15223:1998 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied |
| EN 1089-3:2011 | Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
| DIN EN ISO 10524-1:2006-05 | PRESSURE REGULATORS FOR USE WITH MEDICAL GAS - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| ISO 10524-1:2006 | Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| VDE 0750-1 : 2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012) |
| EN 13544-2:2002+A1:2009 | Respiratory therapy equipment - Part 2: Tubing and connectors |
| DIN EN ISO 4135:2002-03 | Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001); Trilingual version EN ISO 4135:2001 |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.