DIN EN ISO 14923:2003-10
Current
Current
The latest, up-to-date edition.
THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
01-01-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Manufacturing the coating
4.1 General
4.2 Coating materials
4.3 Coating properties
4.4 Technological and physical properties
5 Tests
5.1 General
5.2 Non-destructive test methods
5.3 Destructive test methods
Gives an overview of the characteristics of Coatings produced by thermal spraying. Tests listed are procedures and test criteria in general use for thermally sprayed coatings.
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN ISO 14923:2003 | Identical |
| SN EN ISO 14923 : 2003 | Identical |
| NF EN ISO 14923 : 2003 | Identical |
| EN ISO 14923:2003 | Identical |
| NBN EN ISO 14923 : 2003 | Identical |
| ISO 14923:2003 | Identical |
| UNE-EN ISO 14923:2004 | Identical |
| NEN EN ISO 14923 : 2003 | Identical |
| NS EN ISO 14923 : 1ED 2003 | Identical |
| BS EN ISO 14923:2003 | Identical |
| UNI EN ISO 14923 : 2003 | Identical |
| DIN EN ISO 14921:2011-04 | Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) |
| ENV 1159-2 : 1993 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - DETERMINATION OF THERMAL DIFFUSIVITY |
| ISO 2063:2005 | Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 24624 : 1992 | PAINTS AND VARNISHES - PULL-OFF TEST |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| EN 582:1993 | Thermal spraying - Determination of tensile adhesive strength |
| EN ISO 1463:2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
| IEC 60345:1971 | Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures |
| EN ISO 14922-2:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999) |
| ISO 4516:2002 | Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
| EN ISO 4541:1994 | Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978) |
| EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
| IEC 60468:1974 | Method of measurement of resistivity of metallic materials |
| ENV 1071-1 : 1993 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF COATING THICKNESS BY CONTACT PROBE PROFILOMETER |
| EN ISO 2064:2000 | Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| EN ISO 3868:1994 | Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976) |
| EN ISO 9220:1994 | Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988) |
| EN ISO 4518:1995 | Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980) |
| EN ISO 3882:2003 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
| ISO 8894-1:2010 | Refractory materials Determination of thermal conductivity Part 1: Hot-wire methods (cross-array and resistance thermometer) |
| EN ISO 6988:1994 | Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985) |
| IEC 60167:1964 | Methods of test for the determination of the insulation resistance of solid insulating materials |
| ISO 8301:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter apparatus |
| EN 623-2:1993 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 2: Determination of density and porosity |
| EN ISO 14922-4:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999) |
| EN ISO 14922-3:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999) |
| EN ISO 14922-1:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999) |
| EN 821-2:1997 | Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
| ISO 14577-1:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method |
| EN ISO 14919:2015 | Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 14577-3:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks |
| EN 657:2005 | Thermal spraying - Terminology, classification |
| EN 1071-2:2002 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method |
| ISO 14577-2:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines |
| DIN 52616:1977-11 | TESTING OF THERMAL INSULATION MATERIALS; DETERMINATION OF THERMAL CONDUCTIVITY BY MEANS OF A HEAT-FLOW METER |
| EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
| EN 1274:2004 | Thermal spraying - Powders - Composition, technical supply conditions |
| ENV 1071-3 : DRAFT 1994 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION BY A SCRATCH TEST |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| EN 993-14 : 1998 | METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS - PART 14: DETERMINATION OF THERMAL CONDUCTIVITY BY THE HOT-WIRE (CROSS-ARRAY) METHOD |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.