DIN EN ISO 13849-2:2013-02
Current
The latest, up-to-date edition.
SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
Hardcopy , PDF
German, English
02-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Validierungsverfahren
3.1 Validierungsleitsätze
3.2 Allgemeine Fehlerlisten
3.3 Spezielle Fehlerlisten
3.4 Validierungsplan
3.5 Hinweise für die Validierung
3.6 Validierungsaufzeichnung
4 Validierung durch Analyse
4.1 Allgemeines
4.2 Analysentechniken
5 Validierung durch Prüfen
5.1 Allgemeines
5.2 Messunsicherheit
5.3 Höherwertige Festlegungen
5.4 Anzahl der Prüflinge
6 Validierung der Sicherheitsfunktionen
7 Validierung der Kategorien
7.1 Analyse und Prüfung der Kategorien
7.2 Validierung der Festlegungen für Kategorien
7.2.1 Kategorie B
7.2.2 Kategorie 1
7.2.3 Kategorie 2
7.2.4 Kategorie 3
7.2.5 Kategorie 4
7.3 Validierung der Kombination von sicherheitsbezogenen
Teilen
8 Validierung der Umgebungsanforderungen
9 Validierung der Instandhaltungsanforderungen
Anhang A (informativ) Möglichkeiten zur Validierung
mechanischer Systeme
A.1 Einleitung
A.2 Liste der grundlegenden Sicherheitsprinzipien
A.3 Liste der bewährten Sicherheitsprinzipien
A.4 Liste der bewährten Bauteile
A.5 Fehlerlisten und Fehlerausschlüsse
A.5.1 Einleitung
A.5.2 Verschiedene mechanische Geräte, Bauteile, Elemente
A.5.3 Schraubendruckfedern
Anhang B (informativ) Möglichkeiten zur Validierung
pneumatischer Systeme
B.1 Einleitung
B.2 Liste der grundlegenden Sicherheitsprinzipien
B.3 Liste der bewährten Sicherheitsprinzipien
B.4 Liste der bewährten Bauteile
B.5 Fehlerlisten und Fehlerausschlüsse
B.5.1 Einleitung
B.5.2 Ventile
B.5.3 Rohrleitungen, Schlauchleitungen und
Verbindungselemente
B.5.4 Druckübersetzer und Druckmittelwandler
B.5.5 Druckluftaufbereitung
B.5.6 Energiespeicher und Druckbehälter
B.5.7 Sensoren
B.5.8 Informationsverarbeitung
Anhang C (informativ) Möglichkeiten zur Validierung
hydraulischer Systeme
C.1 Einleitung
C.2 Liste der grundlegenden Sicherheitsprinzipien
C.3 Liste der bewährten Sicherheitsprinzipien
C.4 Liste der bewährten Bauteile
C.5 Fehlerlisten und Fehlerausschlüsse
C.5.1 Einleitung
C.5.2 Ventile
C.5.3 Rohrleitungen aus Metall, Schlauchleitungen und
Verbindungselemente
C.5.4 Filter
C.5.5 Energiespeicher
C.5.6 Sensoren
Anhang D (informativ) Möglichkeiten zur Validierung
elektrischer Systeme
D.1 Einleitung
D.2 Liste der grundlegenden Sicherheitsprinzipien
D.3 Liste der bewährten Sicherheitsprinzipien
D.4 Liste der bewährten Bauteile
D.5 Fehlerlisten und Fehlerausschlüsse
D.5.1 Einleitung
D.5.2 Leitungen und Verbindungen
D.5.3 Stromschalter
D.5.4 Diskrete elektrische Bauteile
D.5.5 Elektronische Bauteile
Anhang ZA (informativ) Zusammenhang zwischen dieser
Europäischen Norm und den grundlegenden
Anforderungen der EG-Richtlinie 98/37/EG,
geändert durch Richtlinie 98/79/EG
Anhang ZB (informativ) Zusammenhang zwischen dieser
Europäischen Norm und den grundlegenden
Anforderungen der EG-Richtlinie 2006/42/EG
Literaturhinweise
| Committee |
TC 199
|
| DevelopmentNote |
Supersedes DIN EN 954-2 (12/2003)
|
| DocumentType |
Standard
|
| Pages |
98
|
| ProductNote |
THIS STANDARD ALSO REFERS TO JESD22A121.01, JESD201.
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 13849-2:2012 | Identical |
| NF EN ISO 13849-2 : 2012 | Identical |
| NEN EN ISO 13849-2 : 2012 | Identical |
| NS EN ISO 13849-2 : 2012 | Identical |
| I.S. EN ISO 13849-2:2012 | Identical |
| SN EN ISO 13849-2:2013 | Identical |
| UNI EN ISO 13849-2 : 2013 | Identical |
| UNE-EN ISO 13849-2:2013 | Identical |
| BS EN ISO 13849-2:2012 | Identical |
| EN ISO 13849-2:2012 | Identical |
| DIN 18650-1:2010-02 | POWERED PEDESTRIAN DOORS - PART 1: PRODUCT REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 13856-2:2013-08 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013) |
| DIN EN ISO 11681-1:2012-05 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) |
| DIN EN ISO 13856-1:2013-08 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013) |
| VDI 2510 Blatt 2:2013-12 | Automated guided vehicle systems (AGVS) - Safety of AGVS |
| DIN EN ISO 11681-2:2017-10 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011 + Amd 1:2017) (includes Amendment A1:2017) |
| DIN EN ISO 13856-3:2013-12 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013) |
| DIN 56950-1:2012-05 | ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - PART 1: SAFETY REQUIREMENTS AND INSPECTIONS |
| DIN EN ISO 14119:2014-03 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013) |
| DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
| DIN EN ISO 11681-2:2012-04 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011 + AMD 1:2017) |
| DIN EN ISO 13849-1:2016-06 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| ISO 4079-1:2001 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| ISO 13855:2010 | Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| DIN EN 60812:2015-08 (Draft) | ANALYSIS TECHNIQUES FOR SYSTEM RELIABILITY - PROCEDURE FOR FAILURE MODE AND EFFECTS ANALYSIS (FMEA) |
| ISO 4960:2007 | Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
| ISO 11161:2007 | Safety of machinery — Integrated manufacturing systems — Basic requirements |
| EN 50205:2002 | Relays with forcibly guided (mechanically linked) contacts |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| IEC 61131-1:2003 | Programmable controllers - Part 1: General information |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| DIN EN 1088:2008-10 | SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION |
| DIN EN 60269-1 : 2015 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006 + A1:2009 + A2:2014) |
| IEC 60893-1:2004 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| DIN EN 61800-5-2 : 2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL (IEC 61800-5-2:2016) |
| IEC 61078:2016 | Reliability block diagrams |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 13851:2002 | Safety of machinery Two-hand control devices Functional aspects and design principles |
| IEC 61165:2006 | Application of Markov techniques |
| DIN EN ISO 4413:2011-04 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
| DIN EN 60204-1 : 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| VDE 0411-500 : 2008 COR 1 2009 | PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| DIN EN ISO 11161:2010-10 | Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007 + Amd 1:2010); German version EN ISO 11161:2007 + A1:2010 |
| DIN EN ISO 13855:2010-10 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
| EN 952:1999 | Door leaves - General and local flatness - Measurement method |
| DIN EN 1037:2008-11 | SAFETY OF MACHINERY - PREVENTATION OF UNEXPECTED START-UP |
| DIN EN 60893-1 : 2004 | INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| DIN EN ISO 4414:2011-04 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| DIN EN 60529 : 2014-09 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529:1989 + A1:1999 + A2:2013) |
| VDE 0113-1 : 2007 COR 1 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 13849-1:2016-06 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| DIN EN 61078:2015-04 (Draft) | RELIABILITY BLOCK DIAGRAMS (IEC 61078:2016) |
| IEC 61131-2:2017 | Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| DIN EN ISO 13850:2016-05 | SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015) |
| DIN EN ISO 12100:2011-03 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| DIN EN 61165:2007-02 | APPLICATION OF MARKOV TECHNIQUES |
| DIN EN 61131-1:2004-03 | PROGRAMMABLE CONTROLLERS - PART 1: GENERAL INFORMATION |
| VDE 0636-1 : 2015 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006 + A1:2009 + A2:2014) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
| DIN EN 61131-2 : 2008 COR 1 2009 | PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
| DIN EN 61025:2007-08 | FAULT TREE ANALYSIS (FTA) |
| VDE 0318-1 : 2004 | INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS |
| VDE 0160-105-2 : 2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL (IEC 61800-5-2:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.