DIN EN ISO 13076:2012-10
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS (ISO 13076:2012)
Available format(s)
Hardcopy , PDF
Superseded date
04-15-2020
Superseded by
Language(s)
English
Published date
01-01-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.This standard is included in DIN HDBK 400 and 478.
| DevelopmentNote |
Supersedes DIN 55664. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 13076:2012 | Identical |
| EN ISO 13076:2012 | Identical |
| DIN EN ISO 6272-2:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
| DIN HDBK 478 : 1ED 2015 | HAERTE UND VERSCHLEISSFESTIGKEIT VON BESCHICHTUNGEN - PRUEFVERFAHREN |
| DIN EN ISO 4628-5:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| DIN EN ISO 4628-1:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
| DIN EN ISO 4628-7:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2016) |
| DIN EN ISO 6272-1:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
| DIN EN ISO 4628-3:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016 |
| DIN EN ISO 20566:2013-06 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| DIN EN ISO 4628-2:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING (ISO 4628-2:2016) |
| DIN EN ISO 4628-4:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING (ISO 4628-4:2016) |
| DIN EN ISO 4628-10:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2016) |
| DIN HDBK 400 : 2ED 2014 | BEWITTERUNG - 48 NORMEN ZUR NATUERLICHEN UND KUENSTLICHEN BEWITTERUNG IM ORIGINALTEXT |
| DIN EN ISO 2409:2013-06 | PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013) |
| DIN EN ISO 9117-2:2010-07 | Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010) |
| DIN EN ISO 20566:2013-06 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| DIN EN ISO 1519:2011-04 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| ISO 6272-2:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
| ISO 2812-2:2007 | Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
| DIN EN ISO 4628-7:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2016) |
| DIN EN ISO 4628-6:2011-12 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
| ISO 20567-2:2017 | Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body |
| ISO 9117-4:2012 | Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder |
| DIN EN ISO 2812-5:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
| DIN EN ISO 28199-3:2010-01 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power (ISO 28199-3:2009) |
| DIN EN ISO 20567-2:2007-01 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY (ISO 20567-2:2017) |
| ISO 4628-8:2012 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
| DIN EN ISO 4628-2:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING (ISO 4628-2:2016) |
| DIN EN ISO 1524:2013-06 | PAINTS, VARNISHES AND PRINTING INKS - DETERMINATION OF FINENESS OF GRIND (ISO 1524:2013) |
| ISO 17132:2007 | Paints and varnishes T-bend test |
| DIN EN ISO 2812-1:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 1: IMMERSION IN LIQUIDS OTHER THAN WATER (ISO 2812-1:2017) |
| ISO 3668:2017 | Paints and varnishes — Visual comparison of colour of paints |
| ISO 20567-1:2017 | Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing |
| DIN EN ISO 17132:2008-01 | PAINTS AND VARNISHES - T-BEND TEST |
| DIN EN ISO 6272-1:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
| ISO 2812-5:2007 | Paints and varnishes Determination of resistance to liquids Part 5: Temperature-gradient oven method |
| DIN EN ISO 9117-5:2012-11 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
| DIN EN ISO 4628-4:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING (ISO 4628-4:2016) |
| ISO 20566:2013 | Paints and varnishes Determination of the scratch resistance of a coating system using a laboratory-scale car-wash |
| ISO 12137:2011 | Paints and varnishes — Determination of mar resistance |
| ISO 2812-3:2012 | Paints and varnishes Determination of resistance to liquids Part 3: Method using an absorbent medium |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| ISO 9117-5:2012 | Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test |
| ISO 4628-3:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
| DIN EN ISO 2409:2013-06 | PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013) |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| ISO 28199-3:2009 | Paints and varnishes Evaluation of properties of coating systems related to the application process Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power |
| ISO 2812-4:2017 | Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods |
| DIN EN ISO 11998:2006-10 | Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006) |
| ISO 4628-10:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| ISO 9117-3:2010 | Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini |
| DIN EN ISO 1518-2:2012-01 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011) |
| DIN EN ISO 9117-3:2010-07 | Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) |
| ISO 11998:2006 | Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings |
| DIN EN ISO 2812-2:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| ISO 16862:2003 | Paints and varnishes Evaluation of sag resistance |
| ISO 6272-1:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
| DIN EN ISO 9117-4:2012-11 | Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012) |
| ISO 1518-1:2011 | Paints and varnishes Determination of scratch resistance Part 1: Constant-loading method |
| DIN EN ISO 4628-8:2013-03 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
| ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| DIN EN ISO 6860:2006-06 | Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
| DIN EN ISO 12137:2012-01 | Paints and varnishes - Determination of mar resistance (ISO 12137:2011) |
| DIN EN ISO 4628-3:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016 |
| DIN EN ISO 2812-4:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 4: SPOTTING METHODS (ISO 2812-4:2017) |
| ISO 1524:2013 | Paints, varnishes and printing inks Determination of fineness of grind |
| DIN EN ISO 2812-3:2012-10 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
| DIN EN ISO 4628-10:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2016) |
| ISO 9117-1:2009 | Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time |
| ISO 9117-6:2012 | Paints and varnishes — Drying tests — Part 6: Print-free test |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| DIN EN ISO 4628-5:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| DIN EN ISO 16862:2006-08 | Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
| DIN EN ISO 6272-2:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
| ISO 1518-2:2011 | Paints and varnishes Determination of scratch resistance Part 2: Variable-loading method |
| ISO 15710:2002 | Paints and varnishes — Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
| ISO 6860:2006 | Paints and varnishes Bend test (conical mandrel) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| ISO 4628-7:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 7: Assessment of degree of chalking by velvet method |
| DIN EN ISO 9117-6:2012-10 | Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012) |
| ISO 9117-2:2010 | Paints and varnishes — Drying tests — Part 2: Pressure test for stackability |
| DIN EN ISO 9117-1:2009-10 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.