DIN EN ISO 11890-1:2007-09
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
Hardcopy , PDF
09-02-2024
English, German
09-01-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Kurzbeschreibung
5 Erforderliche ergänzende Informationen
6 Probenahme
7 Durchführung
7.1 Anzahl der Bestimmungen und allgemeine
Prüfbedingungen
7.2 Bestimmung der Parameter
7.3 Dichte
7.4 Gehalt an nicht flüchtigen Anteilen
7.5 Wassergehalt
7.6 Ausgenommene Verbindungen (nur, wenn nationale
Gesetzgebungen gelten)
8 Berechnung
8.1 Allgemeines
8.2 Verfahren 1: VOC-Gehalt, als Massenanteil in Prozent,
des Produktes im gebrauchsfertigen Zustand
8.3 Verfahren 2: VOC-Gehalt, in Gramm je Liter, des Produktes
im gebrauchsfertigen Zustand
8.4 Verfahren 3: VOC-Gehalt, in Gramm je Liter, des Produktes
im gebrauchsfertigen Zustand abzüglich Wasser
8.5 Verfahren 4: VOC-Gehalt, in Gramm je Liter, des Produktes
im gebrauchsfertigen Zustand abzüglich Wasser und
abzüglich ausgenommener Verbindungen (nur, wenn nationale
Gesetzgebungen gelten)
9 Auswertung
10 Präzision
10.1 Allgemeines
10.2 Wiederholgrenze r
10.3 Vergleichgrenze R
11 Prüfbericht
Anhang A (normativ) Erforderliche ergänzende Informationen
Literaturhinweise
This standard is included in DIN Handbook 201. Deals with the testing and sampling of paints, varnishes and related products. Specifies a method to determine the volatile organic compound (VOC) content of paints, varnishes and their raw materials. This standard may be used where the expected VOC content is greater than about 15 % by mass. When the expected VOC content is greater than 0,1 % by mass and less than about 15 % by mass, ISO 11890-2 shall be employed. The method assumes that the volatile matter is either water or organic. However, other volatile inorganic compounds may be present and may need to be quantified by another suitable method and allowed for in the calculations.
| DevelopmentNote |
Supersedes DIN ISO 11890-1. (04/2002)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NS EN ISO 11890-1 : 2ED 2007 | Identical |
| I.S. EN ISO 11890-1:2007 | Identical |
| NF EN ISO 11890-1 : 2007 | Identical |
| UNI EN ISO 11890-1 : 2008 | Identical |
| NEN EN ISO 11890-1 : 2007 | Identical |
| SN EN ISO 11890-1:2007 | Identical |
| EN ISO 11890-1:2007 | Identical |
| ISO 11890-1:2007 | Identical |
| NBN EN ISO 11890-1 : 2007 | Identical |
| UNE-EN ISO 11890-1:2007 | Identical |
| BS EN ISO 11890-1:2007 | Identical |
| ONORM EN ISO 11890-1 : 2007 | Identical |
| DIN HDBK 201 : 8ED 2017 | ROHSTOFFE FUER BESCHICHTUNGSSTOFFE 2 - BINDEMITTEL, LOESEMITTEL UND WEICHMACHER - DIN-EN-, DIN-EN-ISO- UND DIN-ISO-NORMEN |
| BWB TL 8010-0048 : 2ED MAY 2006 | |
| DIN EN ISO 11890-2:2013-07 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| VDI 3456:2009-12 | Emission control - Refinishing and finishing of vehicles |
| VDI 3455:2013-08 | Emission control - High-volume car body painting plants |
| BWB TL 8010-0045 : 1ED 2006 | DECKBESCHICHTUNGSSTOFFE FUER LUFTFAHRZEUGE 2-KOMPONENTEN-POLYURETHAN-DECKBESCHICHTUNGSSTOFFE, BW-EIGENBEDARF |
| BWB TL 8010-0047 : 2ED MAY 2006 | |
| DIN EN ISO 17895:2005-06 | Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
| DIN EN ISO 2811-1:2016-08 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
| DIN EN ISO 11890-2:2013-07 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
| DIN EN ISO 4618:2015-01 | Paints and varnishes - Terms and definitions (ISO 4618:2014); Trilingual version EN ISO 4618:2014 |
| DIN ISO 5725-1:1997-11 | Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
| DIN EN ISO 15528:2013-12 | PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING (ISO 15528:2013) |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| DIN EN ISO 1513:2010-10 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| DIN EN 23270:1991-09 | PAINTS, VARNISHES AND THEIR RAW MATERIALS; TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING |
| ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| DIN EN ISO 3251:2008-06 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 2811-4:2011 | Paints and varnishes Determination of density Part 4: Pressure cup method |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.