DIN EN ISO 10524-4:2008-09
Current
The latest, up-to-date edition.
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS
Hardcopy , PDF
English
01-01-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Terminologie
5 Allgemeine Anforderungen
5.1 Sicherheit
5.2 Alternative Konstruktion
5.3 Werkstoffe
5.4 Anforderungen an die Ausführung
5.5 Konstruktive Anforderungen
6 Prüfverfahren
6.1 Allgemeines
6.2 Prüfbedingungen
6.3 Prüfverfahren für den Hinterdruck
6.4 Prüfverfahren auf Undichtheit
6.5 Prüfverfahren auf mechanische Festigkeit
6.6 Prüfverfahren auf Durchflussgenauigkeit bei
Druckminderern mit Durchflussmessgeräten
oder mit Geräten zur Messung des
Durchflusses nach dem Wirkdruckverfahren
6.7 Prüfverfahren auf Durchflussstabilität bei
Druckminderern mit Durchflussmessgeräten
oder Geräten zur Messung des Durchflusses
nach dem Wirkdruckverfahren
6.8 Prüfverfahren auf Durchflussstabilität und -genauigkeit
bei Druckminderern mit festen Blenden
6.9 Prüfverfahren für das Drehmoment zum Lösen
6.10 Prüfverfahren zur Beurteilung der Haltbarkeit von
Aufschriften und Farbcodierungen
7 Kennzeichnung, Farbcodierung, Verpackung
7.1 Kennzeichnung
7.2 Farbcodierung
8 Vom Hersteller zu liefernde Informationen
Anhang A (informativ) Typische Beispiele von
Niederdruckminderern
Anhang B (informativ) Begründungen
Anhang C (informativ) Berichtete regionale und nationale
Abweichungen der Farbcodierung und Nomenklatur
für medizinische Gase
Anhang D (informativ) Umweltgesichtspunkte
Literaturhinweise
Anhang ZA (informativ) Zusammenhang zwischen dieser
Europäischen Norm und den rundlegenden
Anforderungen der EG-Richtlinie 93/42/EWG
Applies to the types of low-pressure regulators and intended to be used with the following medical gases in the treatment, management, diagnostic evaluation and care of patients: - oxygen; - nitrous oxide; - medical air; - helium; - carbon dioxide; - xenon; - specified mixtures of the gases listed above; - air for driving surgical tools; - nitrogen for driving surgical tools; - oxygen-enriched air.
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| ISO 10524-4:2008 | Identical |
| EN ISO 10524-4:2008 | Identical |
| DIN EN ISO 7396-1:2016-09 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| EN 13220 : 1998 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| DIN EN ISO 9170-1:2016-09 (Draft) | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| ISO 15002:2008 | Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| CGSB 24.2 : M86 | IDENTIFICATION OF MEDICAL GAS CONTAINERS, PIPELINES AND VALVES |
| DIN EN ISO 5359:2015-02 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| DIN EN ISO 11114-3:2011-04 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
| DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
| DIN EN ISO 10524-3:2013-06 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005 + AMD 1:2013) |
| ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| DIN EN ISO 15001:2012-06 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| CGA C 9 : 2013 | STANDARD COLOR MARKING OF COMPRESSED GAS CONTAINERS FOR MEDICAL USE |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| ISO 10524-3:2005 | Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves |
| EN 1089-3:2011 | Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
| AS 2896-2011 | Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems |
| DIN EN ISO 10524-1:2006-05 | PRESSURE REGULATORS FOR USE WITH MEDICAL GAS - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| AS 4484:2016 | Gas cylinders for industrial, scientific, medical and refrigerant use - Labelling and colour coding |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| ISO 10524-1:2006 | Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
| DIN EN ISO 15002:2008-11 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| VDE 0750-1 : 2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012) |
| EN 13544-2:2002+A1:2009 | Respiratory therapy equipment - Part 2: Tubing and connectors |
| DIN EN ISO 4135:2002-03 | Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001); Trilingual version EN ISO 4135:2001 |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.