DIN EN 60352-1:1998-04
Current
The latest, up-to-date edition.
SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
Hardcopy , PDF
German
01-01-1998
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Einführung
1 Anwendungsbereich und Zweck
2 Normative Verweisungen
3 Begriffe
4 Anforderungen
4.1 Verarbeitung
4.2 Werkzeuge
4.3 Wickelstifte
4.4 Wickeldrähte
4.5 Wickelverbindungen
5 Prüfungen
5.1 Prüfen
5.2 Typprüfungen
5.3 Prüfprogramme
6 Anwendungshinweise
6.1 Strombelastbarkeit
6.2 Angaben zu Werkzeugen
6.3 Angaben zu Wickelstiften
6.4 Angaben zu Wickeldrähten
6.5 Angaben zu Wickelverbindungen
Anhang ZA (normativ) Normative Verweisungen auf
internationale Publikationen mit ihren
entsprechenden europäischen Publikationen
Deals with wrapped connections with solid single round wires having minimum nominal diameters of 0.16 mm, and posts suitable for using in telecommunications equipment and electronic devices using similar techniques. Provides details on materials and data from industrial experience, as well as test methods for provision of electrically stable connections under prescribed environmental conditions.
| DevelopmentNote |
Supersedes DIN IEC 60352-1. (05/2002)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 60352-1 : 1998 | Identical |
| EN 60352-1:1997 | Identical |
| SN EN 60352-1 : 1997 | Identical |
| UNE-EN 60352-1:2001 | Identical |
| I.S. EN 60352-1:1999 | Identical |
| BS EN 60352-1:1998 | Identical |
| IEC 60352-1:1997 | Identical |
| NF EN 60352-1 : 1998 | Identical |
| DIN EN 60603-2:2006-04 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2.54 MM (0.1 IN) WITH COMMON MOUNTING FEATURES |
| DIN EN 60603-9:1998-07 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 9: TWO-PART CONNECTORS FOR PRINTED BOARDS, BACKPANELS AND CABLE CONNECTORS, BASIC GRID OF 2,54 MM (0,1 IN) |
| DIN EN 60603-12:1998-07 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 12: DETAIL SPECIFICATION FOR DIMENSIONS, GENERAL REQUIREMENTS AND TESTS FOR A RANGE OF SOCKETS DESIGNED FOR USE WITH INTEGRATED CIRCUITS |
| DIN EN 60603-6:1998-04 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 6: EDGE-SOCKET CONNECTORS AND PRINTED-BOARD CONNECTORS WITH 2,54 MM (0,1 IN) CONTACT SPACING FOR SINGLE OR DOUBLE-SIDED PRINTED BOARDS OF 1,6 MM (0,063 IN) NOMINAL THICKNESS |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| DIN IEC 60512-6:1994-05 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS; PART 6: CLIMATIC TESTS AND SOLDERING TESTS |
| IEC 60512-8:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations |
| IEC 60512-6:1984 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests |
| DIN IEC 60512-8:1994-05 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS; PART 8: CONNECTOR TESTS (MECHANICAL) & MECHANICAL TESTS ON CONTACTS & TERMINATIONS |
| DIN IEC 60512-2 : 1994 AMD 1 1995 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS; PART 2: GENERAL EXAMINATION, ELECTRICAL CONTINUITY AND CONTACT RESISTANCE TESTS, INSULATION TESTS AND VOLTAGE STRESS TESTS |
| DIN EN 60352-5:2012-10 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance (IEC 60352-5:2012); German version EN 60352-5:2012 |
| DIN EN 60068-1 : 2015 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013) |
| ISO 468:1982 | Surface roughness — Parameters, their values and general rules for specifying requirements |
| IEC 60352-5:2012 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance |
| ISO 1337:1980 | Wrought coppers (having minimum copper contents of 99,85 %) Chemical composition and forms of wrought products |
| IEC 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
| IEC 60979:1989 | Wires for wire wrapping applications |
| DIN IEC 60512-1:1994-05 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS - GENERAL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.