DIN EN 1846-3:2013-11
Current
The latest, up-to-date edition.
FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
Hardcopy , PDF
English, German
01-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Requirements and verifications
6 Information for use
Annex A (informative) - Symbols and abbreviated terms
Annex B (normative) - Theoretical stability calculation
Annex C (normative) - Rated capacity of the tank
Annex D (normative) - Monitor throw measurement
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
Bibliography
Defines the minimum requirements for safety and performance of some optional specific permanently installed equipment on firefighting and rescue service vehicles, operated by trained persons, as designated in EN 1846-1 and specified in EN 1846-2.
| DocumentType |
Standard
|
| Pages |
55
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| EN 1846-3:2013 | Identical |
| I.S. EN 1846-3:2013 | Identical |
| NS EN 1846-3 : 2013 | Identical |
| SN EN 1846-3:2013 | Identical |
| NBN EN 1846-3 : 2013 | Identical |
| UNE-EN 1846-3:2015 | Identical |
| UNI EN 1846-3 : 2013 | Identical |
| NF EN 1846-3 : 2013 | Identical |
| BS EN 1846-3:2013 | Identical |
| NEN EN 1846-3 : 2013 | Identical |
| ISO 10075-2:1996 | Ergonomic principles related to mental workload — Part 2: Design principles |
| EN 1947:2014 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| EN 1846-2:2009+A1:2013 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
| EN 14710-1:2005+A2:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| DIN VDE 0100-717 : 2010-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS |
| EN 1028-2:2002+A1:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| VDE 0100-717 : 2010-10 | LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| DIN 2001-2:2009-04 | DRINKING WATER SUPPLY FROM SMALL UNITS AND NON STATIONARY UNITS - PART 2: NON STATIONARY UNITS - GUIDELINES FOR DRINKING WATER, PLANNING, CONSTRUCTION, OPERATION ANDMAINTENANCE OF UNITS - TECHNICAL RULE OF THE DVGW |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| DIN 1988-100:2011-08 | Codes of practice for drinking water installations - Part 100: Protection of drinking water, drinking water quality control; DVGW code of practice |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| DIN EN 805:2000-03 | Water supply - Requirements for systems and components outside buildings; German version EN 805:2000 |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| DVGW W 400-3 : 2006 | TECHNISCHE REGELN WASSERVERTEILUNGSANLAGEN (TRWV) - TEIL 3: BETRIEB UND INSTANDHALTUNG |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| EN 1028-1:2002+A1:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| DIN 14505:2015-01 | FIRE FIGHTING AND RESCUE SERVICE VEHICLES - VEHICLES FOR ROLLER CONTAINERS - SUPPLEMENTARY REQUIREMENTS FOR DIN EN 1846-3 |
| EN ISO 13849-2:2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| EN 1789:2007+A2:2014 | Medical vehicles and their equipment - Road ambulances |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN 1846-1:2011 | Firefighting and rescue service vehicles - Part 1: Nomenclature and designation |
| EN 15767-1:2009 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 1: General requirements for portable monitor assemblies |
| DIN 14502-3:2015-12 | Firefighting and rescue service vehicles - Part 3: Coloration and special markings |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| ISO 10075:1991 | Ergonomic principles related to mental work-load General terms and definitions |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| DVGW W 405 : 2008 | WATER FOR FIRE FIGHTING TO BE MADE AVAILABLE BY PUBLIC DRINKING WATER SUPPLY SYSTEMS |
| DVGW W 408 : 2010 | ANSCHLUSS VON ENTNAHMEVORRICHTUNGEN AN HYDRANTEN IN TRINKWASSERVERTEILUNGSANLAGEN |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.